HIGH POWER WIREWOUND RESISTORS _ TUBULAR, 5 WATT TO 500 WATT GCOo Oo TL SERIES SERIES TL Inductive (standard) OPTION X Non-inductive OPTION ER 100 Hour Burn-In @ Widest range in the indu | @ High performance for low cost t -| 2B @ High-temperature silicone coating CC ~ @ Tolerances to +1.0% ) 3 @ Tapped and adjustable construction available M@ Custom sizes and terminations available @ Flat version available - H w | B Mounting hardware availabie L h RCD Wattage Resis. Range Max. Dim. . O.D. im. Type @25 C O10 to. Voltage (Lengthy over coating) (core LD) W(Typ.) | H (Typ) |) (Typ.) TLS 5 5K 200V 78 + .062 40 187 + 032 16 32 08 TL8 8 10K 250V 1.00 + .062 .40 187 + 032 16 32 08 TL12 12 27k 500V 1.75 + 062 40 187 + 032 16 38 .08 TL20 20 33K 600V 2.00 + .062 59 312 + 062 A6 40 08 TL25 25 36K 750V 2.00 + .062 68 344 + 062 A6 40 08 TL50 50 100K 1200V. | 400+ 125 75 344 + 062 20 50 08 TL75 75 100K 2000V. 1400+ 125 1.25 750 + 062 32 60 173 TL100 100 150K 2500V 6.00 + .25 125 750 + 062 32 .60 173 TL150 150 200k 3000V 7.875 4 25 1.25 750 + 062 32 .60 173 TL200 200 250K 4500V 985+ 25 1.25 750 + 062 82 60 173 TL300 300 330K 5000V. 11200 + .25 1.25 750 + 062 32 60 173 TL500 500 500K 5s000v. [12.75 + 25 .216 1 350 Min. 50 1.38 217 * Available as low as 0.01 on special order MODIFICATIONS: SPECIFICATIONS TLA Series Axial Lead | | Tolerance: +5% is standard 10 and TLR Series Radial Lead above, +10% below 19 TL series resistors are available : (avail. to 1%) with lead wires for soldering direct Temp. Coef.: 50 ppm/C typ. 19 to PC board. The resistor body can be supported by leads up to 25W size, Type TLA has axial leads (as pictured), type TLR has radial leads. TLV Series Adjustable Feature a track of exposed wire which enables adjustment of resist- ance value. The slider divides the wattage rating in direct proportion to the divided resistance. Due to the use of heavier wire sizes, the maxi- mum resistance of the TLV series is 33% of the standard TL series. TLT Series Tapped Multi-section or tapped resistors are available for voltage divider applica- tions. Power rating is reduced due to reduction in winding space. Indicate the wattage required per section when ordering. Q Diel. Strength: Overload: Derating: HOW TO ORDER Options (leave blank if standard) X"=Non Inductive. "ER" =Burn-In Resistance Value and above, 90 ppm 0.19 to 0.990 1000 VAC (terminal to mounting bracket 10 times rated power for 5 sec. Full power at 25C to zero power at 350C Tolerance RCD Components, Inc., 520 East Industrial Park Dr., Manchester, NH USA 03109 Tel: (603) 669-0054 TLA 12 X 102 5% RCD Type ae (TL. TLA, TLR, TLV, TLT1 Size 33 Fax: (603) 669-5455