Broyce Control Ltd., Pool Street, Wolverhampton, West Midlands WV2 4HN. England
H+44 (0) 1902 773746 G+44 (0) 1902 420639 Email: sales@broycecontrol.com Web: http://www.broycecontrol.com
DIAGRAMME DES TEMPS
ZEITDIAGRAMM
t
Energisation du délai de démarrage
Ansteuer Verzögerung
§
§ SUPPLY INDICATION
§ RELAY INDICATION
§ DUAL VOLTAGE
§ SLIM DESIGN
§
DÉMARRAGE
§ INDICATION D ' ALIMENTATION
§ INDICATION DE RELAIS
§ DOUBLE VOLTAGE
§ DESIGN LÉGER
§
§ VERSORGUNGS - INDIKATION
§ RELAIS INDIKATION
§ DOPPELSPANNUNG
§ LEICHTE KONSTRUKTION
§
NSTALLATION AND SETTING
Installation work must be carried
out by qualified personnel.
- BEFORE INSTALLATION, ISOLATE THE SUPPLY.
- Connect the unit as shown in the diagram above.
- Apply power (green LED on).
- Unit will operate according to function selected (see
'timing diagram').
Troubleshooting
- Check wiring and voltage present.
- Check polarity (for DC supplies only).
§
Supply voltage Un: 12V AC, 12V DC
(AC: 48 - 63Hz) 24V AC/DC / 110V AC *
24V AC/DC / 230V AC *
* Dual Voltage
Supply variation: 0.85 - 1.15 x Un
Power consumption:
AC: 1.2VA (27.6V), 3VA (126V)
(1.15 X Un) 13VA (264V)
DC: 0.4W (13.8V), 0.6W
(27.6V)
Time delay (t): 0.5 - 10, 1 - 30, 2 - 60S
0.5 - 10, 2 - 60M
Repeat Accuracy: ± 0.5% @ constant condition
Reset time: ≈ 100mS
-20 to +60°C
Relative humidity: +95%
Contact rating: 1 x C.O.
AC1 250V AC 8A (2000VA)
AC15 250V AC 5A (no),
3A (nc)
DC1 25V DC 8A (200W)
Electrical life: ≥ 150,000 (AC1)
Housing: to UL94 VO
Weight: ≈ 66g
Mounting option: to BS5584:1978
(EN50 002, DIN 46277-3)
Terminal conductor
size: ≤ 2 x 2.5mm2 solid / stranded
UL, CUL. Conforms to: CSA,
IEC. CE and Compliant
The information provided in this literat
accurate (subject to change without prior notice); however,
use of such information shall be entirely at the user's own risk
§
Des travaux d'installation doivent être
menés à bien par le personnel qualifié.
- AVANT MONTAGE, ISOLER L ' ALIMENTATION
- Branchement comme indiqué dans le diagramme ci-
dessus.
- Appliquer le puissance (LED verte allumée).
- L ' unité opérera selon la fonction sélectionne (voir
'diagramme des temps').
Intervention (pour régler un problème)
- Vérifier les fils et le voltage présent.
- Vérifier la polarisation (seulement pour les alimentations
en courant continu).
§
Installation Arbeit muß von qualifizierte
Personal durchgeführt werden.
- VOR EINBAU DIE STROMVERSORGUNG
ISOLIEREN
-
Stromversorgung anschliessen wie im Schaltbild unten
angezeigt.
- Stromzufuhr (LED grün an)
- Einheit schaltet sich je nach der gewählten Funktion ein
(siehe 'Zeitdiagramm').
Störungsbehebung
- Überprüfung von Leitungen und gegenwärtiger
Spannung.
- Überprüfung von Polung (nur für
Gleichstromversorgung).
§
Tension d ' alimentation 12V AC, 12V DC
Un: (AC: 48 - 63Hz) 24V AC/DC / 110V AC *
24V AC/DC / 230V AC *
* Double Voltage
Variation d ' alimentation:
0.85 - 1.15 x Un
Puissance consommée: AC: 1.2VA (27.6V), 3VA (126V)
( 1.15 x Un) 13VA (264V)
DC: 0.4W (13.8V), 0.6W
(27.6V)
Délai de temps (t): 0.5 - 10, 1 - 30, 2 - 60S
0.5 - 10, 2 - 60M
Précision répétée ± 0.5% (condition constante)
Temps de remise à zéro: ≈ 100mS
Température ambiante: -20 à +60°C
Humidité relative: +95%
Evaluation du contact: 1 x Inverseur
AC1 250V AC 8A (2000VA)
AC15 250V AC 5A (travail),
3A (repos)
DC1 25V DC 8A (200W)
Durée de vie électrique: ≥ 150,000 (AC1)
Boitier: à UL94 VO
Poids: ≈ 66g
Option de montage: à BS5584:1978
(EN50 002, DIN 46277-3)
Taille du conducteur
terminal: ≤ 2 x 2.5mm2 toron / multi-
filaire
Homologations: UL, CUL. Se conformer à:
CSA, IEC. CE et Déférence
§
12V AC, 12V DC
Un: (AC: 48 - 63Hz) 24V AC/DC / 110V AC *
24V AC/DC / 230V AC *
* Doppelspannung
Wechselversorgung: 0.85 - 1.15 x Un
Energieverbrauch: AC: 1.2VA (27.6V), 3VA (126V)
( 1.15 x Un) 13VA (264V)
DC: 0.4W (13.8V), 0.6W
(27.6V)
Zeitsteuerung (t): 0.5 - 10, 1 - 30, 2 - 60S
0.5 - 10, 2 - 60M
Genauigkeit wiederholen: ± 0.5% (Bedingungen
gleichbleibend)
Stellzeit: ≈ 100mS
Umgebungstemperatur: -20 bis +60°C
Feuchtigkeitsgehalt: +95%
Kontakt Belastung: 1 x Wechsler
AC1 250V AC 8A (2000VA)
AC15 250V AC 5A (Schließer),
3A (Öffner)
DC1 25V DC 8A (250W)
Elektrische Lebensdauer: ≥ 150,000 (AC1)
Gehäuse: bis UL94 VO
Gewicht: ≈ 66g
Befestigungswahl: bis BS5584:1978
(EN50 002, DIN 46277-3)
/ Kabelgrösse: ≤ 2 x 2.5mm2 Festdraht / Litze
Genehmigungen: UL, CUL. Anmerkung: CSA,
IEC. CE und
Übereinstimmung
Les indications contenues dans ce document sont exactes (sous
réserve de changement sans avis préalable) toutefois aux risques et
périls de l ' utilisateur
Es handelt sich in diesen Unterlagen um uns genau bekannte
Angaben, (Änderungen vorbehalten) jedoch diese Änderungen
laufen auf eigene Gefahr des Benutzers.
for 24V AC/DC operation
only.
Relier ensemble les bornes
'A1' et 'A3' seulement pour
des voltages 24V AC/DC.
Die Verbindung der
'A1' und
'A3' nur zur Bedienung für
24V AC/DC benutzen.
A3
16 18
15
-ve+ve
A2
A1
*link
DIAGRAMME DE CONNECTION
SCHALTBILDANSCHLUSS
INSTRUCTIONS DE MONTAGE
MONTAGEAUFÜHRUNGEN
45
Insert screwdriver
to release clips
49 59
Withdraw clips
fully when
surface mounting
Width / largeur / Breite. 17.5 mm (DIN 43880)