Dot Matrix LED General Description Sharp's dot matrix LEDs can express characters and symbols on a display. (Number of dots: 57, 88, 1616). We can supply wide color variation; high-luminosity red T series, yellow-green E series, sunset orange S series, dichromatic emission, etc. LT5038T LT5017ED LT5040ET Common pins Outline dimensions (mm) *1 Number of dots Dot Matrix LED Radiation color Outline dimensions T D Red (High-luminosity) Red K LT5038T A LT5037T K 2020 K A LT5010T 88 30.230.2 K A K 31.831.8 A K LT5013T 31.931.9 A A K 1616 A 4040 LT5005T A 9696 A *1 Common pins show row.(Column row) 57 184 Notice Internet S Sunset orange E Yellow-green E T Red Yellow-green+ (High-luminosity) E D Yellow+ Red green Page Figure 1 12.717.8 LT5017ED LT5027ED LT5010D LT5105D LT5106D LT5106S 186 4 LT5105E LT5106E LT5007ED 5 5/6 LT5008D 187 LT5014D 2 3 LT5014S LT5040ET 7 8 LT5005S 9 188 LT5050ET LT5026ED 10 11 In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/ Dot Matrix LED (Ta=25C) Figures shown below are values per dot. Forward current Peak forward current Outline Model No. Radiation color dimensions IF IFM 1 1 (mm) (mA) (mA) Anode common* Cathode common* 15 50*2 57 12.717.8 Red(High-luminosity) LT5037T LT5038T *2 LT5017ED 15 50 Yellow-green/Red 2020 Yellow-green/Red LT5027ED 50*2 15 50*2 15 Red(High-luminosity) LT5010T LT5010D Red 50*2 15 LT5106D LT5105D 30.230.2 50*2 20 Red 88 LT5106S Sunset orange 50*2 20 LT5106E LT5105E 50*2 20 Yellow-green LT5007ED Yellow-green/Red 50*2 15 31.831.8 LT5008D 50*2 15 Red LT5013T 80*3 15 Red(High-luminosity) LT5014D 80*3 15 31.931.9 Red LT5014S 80*3 15 Sunset orange 31.731.7 Yellow-green/Red(High-luminosity) LT5040ET 50*2 15 Red(High-luminosity) LT5005T 80*3 15 1616 LT5005S 4040 Sunset orange 80*3 15 Yellow-green/Red(High-luminosity) LT5050ET 50/50*3 15/15 9696 Yellow-green/Red LT5026ED 80*3 15 *1 Common pins show row.(Column row) *2 Duty ratio=1/10, Pulse width=0.1ms *3 Duty ratio=1/16, pulse width=0.1ms Number of dots Electro-optical Characteristics Figures shown below are values per dot. Derating factor (mA/C) Pulse 1.45 0.91 0.91 0.91 0.91 0.91 0.91 0.91 0.91 0.91 1.45 1.45 1.45 1.45 1.45 1.45 1.45/1.45 1.45 Reverse voltage VR (V) 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5/5 5 Operating temperature Storage temperature Topr. Tstg. (C) (C) -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +70 -20 to +60 -20 to +80 -20 to +70 -20 to +80 -20 to +70 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 (Ta=25C) Forward voltage*2 Luminous intensity*3 Peak emission wavelength Spectrum radiation bandwidth Reverse current Model No. Number VF(V) (nm) IR(A) IV (mcd) p (nm) IF of dots Anode common*1 Cathode common*1 TYP. MAX. TYP. TYP. TYP. (mA) MAX. LT5037T LT5038T 3.0 (4.5) 660 20 50 100 1.85 57 LT5017ED 2.4/2.2 10 50 30/35 565/635 1.9/1.6 3.0 10 50 30/35 565/635 2.5/2.0 3.0 LT5027ED 2.4/2.2 LT5010T 10 50 20 660 2.2 2.3 1.85 LT5010D 10 50 35 635 1.11 2.7 2.2 LT5106D LT5105D 10 10 35 635 1.11 2.7 2.2 88 LT5106S 10 10 35 610 1.11 2.7 2.2 LT5106E LT5105E 10 10 30 565 1.69 2.7 2.4 LT5007ED 2.4/2.2 3.0/2.7 10 50 30/35 565/635 2.08/1.56 LT5008D 10 3.0 50 35 635 2.03 2.2 LT5013T 10 3.0 50 20 660 1.35 1.85 LT5014D 10 3.0 35 50 635 1.3 2.2 LT5014S 10 3.0 50 35 610 1.11 2.2 LT5040ET 100 3.0 50 30/20 565/660 1.45/1.70 2.4/1.85 1616 LT5005T 10 3.0 50 20 660 1.78 1.85 LT5005S 10 2.7 50 35 610 1.11 2.2 LT5050ET 100 10 30/20 565/660 (1.9)/(3.0) 2.4/1.85 3.0 10 3.0 7.15/5.85 50 30/35 565/635 LT5026ED 2.4/2.2 * Each figure shown in the table is yellow-green/red. *1 Common pins show row.(Column row) *2 IFM=50mA *3 IF=10mA Outline Radiation color dimensions (mm) 12.717.8 Red(High-luminosity) Yellow-green/Red* 2020 Yellow-green/Red* Red(High-luminosity) Red 30.230.2 Red Sunset orange Yellow-green Yellow-green/Red* 31.831.8 Red Red(High-luminosity) 31.931.9 Red Sunset orange 31.731.7 Yellow-green/Red(High-luminosity) * Red(High-luminosity) 4040 Sunset orange Yellow-green/Red(High-luminosity) * 9696 Yellow-green/Red * Notice Internet VR (V) 4 4 4 4 4 4 4 4 4 4 4 4 4 3 4 4 3 4 In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/ Dot Matrix LED Absolute Maximum Ratings 185 1 Outline Dimensions(Unit:mm) 20.0+0 -0.4 P2.57=17.5 Column 1 8 2 1.0 3.0 64-o 1.8 6 7 35-o2.0 24-o 0.45 Internal connection diagram P2.07=14.0 LT5037T 10 7 8 4.6 7.5 7.5 5.0 5.0 3 1.0 1 12 11 2.0 6.6 0.4 MAX. Calking 20.0+0 -0.4 P2.57=17.5 Row 8 1 P I N 12 P I N 1 P2.545=12.7 17.78 0.4 P2.546=15.24 2.0 12.7 0.3 P2.544=10.16 2 12-o 0.45 6.0+1.0 -0.5 Dot Matrix LED 1 9 9 +0.15 -0 8 16 24 17 4 7.62 5 7.5 6 Internal connection diagram 3 4-o4.0 MAX. Calking I Do t LT5038T 1 7.5 9 Row 1 10 7 8 10 Row 2 11 Row 3 12 Row 4 12 13 Row 5 11 14 Row 6 2 15 Row 7 9 16 Row 8 4 LT5037T/LT5038T 20 21 5 22 6 23 8 1 2.7 (For all 64 pcs.) PIN.18 0.4MAX Calking 4-C0.4 10 Row1 B 5 Row 5 30.20.2 1 3.817=26.67 +0 -0.4 Column +0 -0.4 Red Yellow-green 8 22.86 P2.57=17.5 30.20.2 20 8 2.7 4 20 24 LT5017ED 3 64-1.9 7 Column 8 4 Column 7 19 Column 6 3 Column 5 18 Column 4 2 Column 3 17 Column 1 6 Column 2 1 5 1.95 Row8 P2.57=17.5 0.05 3 PIN.1 9 Column1 Column8 3.817=26.67 LT5027ED Internet 7.5 4-o4.0MAX Calking 18 3 19 4 20 21 5 22 6 23 7 24 8.0 1.0 9 Row 1 10 Row 2 11 Row 3 12 Row 4 13 Row 5 14 Row 6 15 Row 7 16 Row 8 2.548=20.32 0.05 1.95 LT5010 Series/LT5106 Series Internal connection diagram 18 2 17 15 6 8 Column 8 2 Column 7 17 Column 6 24 17 1 Column 5 16 Column 4 9 Column 3 8 Column 2 1 I Do t Column 1 7.5 7.5 P2.07=14 7.5 Notice 16-o0.45 Internal connection diagram 24-o0.45 186 4.5 1 6 Dot shows PIN1 Red Yellow-green LT5105 Series Internal connection diagram 18 2 17 15 6 8 11 9 12 10 13 14 5 4 12 10 13 14 5 4 1 3 1 3 8 11 9 LT5010 Series LT5105 Series/LT5106 Series In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/ Dot Matrix LED 31.8 3.0 4.07=28.0 3.0 4.07=28.0 1.0 16.0 16.0 31.80.2 1.0 4.07=28.0 31.80.2 0.2 6 31.80.2 4.07=28.0 5 Outline Dimensions(Unit:mm) 64-o 3.0 2.0 Direction of Pin1 3.0 -o 64 2.0 LT5007ED 6.0 - 6.0 Direction of Pin1 24-o0.55 2.5411=27.94 LT5008D .5 8.0 o1 4- 8.0 .5 1 12 14 13 24.0 16-o0.55 2.547=17.78 o1 4- Internal connection diagram 11 Row 1 16 24.0 9 Row 2 8 Red 12 Row 3 24.0 1 9 13 Row 4 5 Row 5 4 Row 6 Yellow-green Internal connection diagram : 1 dot LT5008ED LT5007ED 24 23 22 21 20 19 18 17 6 5 8 7 10 9 12 11 24 23 22 21 20 19 18 17 6 5 8 7 10 9 12 11 1 Row 7 16 2 15 14 6 7 10 8 COLUMN2 COLUMN3 COLUMN4 COLUMN5 COLUMN6 COLUMN7 COLUMN8 24.0 COLUMN1 3 Row 8 LT5008 Series 31.90.2 1.95 14 15 15 16 16 4 4 3 3 2 2 1 1 LT5007ED/LT5008ED 8 7.5 1.95 1.95 31.70.3 P2.015=30.0 2.013=26.0 2.0 10.0 2.013=26.0 10.0 31.70.3 P2.015=30.0 2.0 256-o1.4 1.95 31.90.2 13 14 265-o 1.6 Dot Matrix LED 7 13 Cover case Internal connection diagram LT5013T Green Red 2.0 8.0 9 16 12.0 8.0 10.0 14.0 Row16 25 Column1 Column16 24 1 31 3 29 5 27 7 23 11 21 13 19 15 17 8 17 4-o 2.0 24 2.0 Row16 LT5013T/LT5014 Series Notice Internet 48-o 0.45 P2.014=28.0 30 18 32 28 20 26 22 25 9 6 10 4 12 16 2 14 Internal connection diagram 25 31 32 33 34 35 26 36 48 37 42 41 43 1 2 6 7 11 12 30 29 40 47 39 46 13 14 18 19 23 24 38 45 27 44 28 7 6 25 Row1 3.0 2.0 LT5014 12.0 32 14.0 8 10.0 1 30 18 32 28 20 26 22 25 9 6 10 4 12 16 2 14 6.0 3.8 1.0 Row1 2.07=14.0 1.0 (24.0) 14.0 10.0 2.5 Column1 Column16 24 1 31 3 29 5 27 7 23 11 21 13 19 15 17 8 26 30 31 35 36 5 4- o 1.0 Spacer 4 3 21 20 9 8 22 37 47 (24.0) 48 19 4-o 4.0 MAX. Calking 11 1 10 2 12 13 23 14 15 16 17 18 24 LT5040ET In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/ 187 Dot Matrix LED Outline Dimensions(Unit:mm) 25 26 27 28 29 30 31 32 16 15 14 13 12 11 10 9 2.0 2.57=17.5 4-o4.0MAX 9 12.5 4-o1.2 8 10.0 Pin1 10.0 30.0 10.0 15.0 7.5 16 10.0 4-o1.1 10.0 15.0 10.0 32 24 17 Row16 47 4.95 48 33 31 32 17 18 34 *4.95 Calking (*12.5) 16 9 (*10.0) P*2.57=*17.5 (15.0) (15.0) Internal connection diagram Column16 1 2 3 4 5 6 7 8 24 23 22 21 20 19 18 17 7.5 Row1 15.0 8 (*12.5) LT5005D/S/E Column1 25 1 25 26 27 28 29 30 31 32 16 15 14 13 12 11 10 9 15.0 30.0 Row16 LT5005 Series 16 1 15 2 14 3 13 4 12 5 11 6 10 7 9 8 Row Row1 32-o0.5 (*10.0) (*17.45) (*17.45) L T 5 0 05 D Column1 Column16 1 2 3 4 5 6 7 8 24 23 22 21 20 19 18 17 P*2.57=*17.5 (10.0) Internal connection diagram LT5005T (15.0) 1.0t 5.7 3.0 2.4 0.5MAX 2.4 256-o1.8 2.513=32.5 1.5 6.0 16 Pin1mark Pin9 8 Pin1 2.4 256- o2.0 (15.0) Row16 16 Column 1 (*12.5) P*2.57=*17.5 16 1 P*2.57=*17.5 (*10.0) 2.57=17.5 32 39.8MAX 40.0MAX 2.513=32.5 Row1 Pin25 1.8 1.0 0.15 17 39.9 0.2 2.45 P2.513=32.5 2.45 48- o 0.45 10 Column 16 Pin 24 39.9 0.2 2.45 P2.513=32.5 2.45 2.4 Column 1 Row 40.0MAX 9 8 9 7 10 6 11 5 12 4 13 3 14 2 15 1 16 Green Red 48 32 47 31 46 30 45 29 44 28 43 27 42 26 41 25 40 24 39 23 38 22 37 21 36 20 35 19 34 18 33 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Column LT5050ET 11 256-o5.0 96.0MAX 20.7 11.1 P6.015=90.0 48-0.5 84.0 4.015=60.0 96.0MAX P6.015=90.0 Row1 Row16 Column 16 9.7 7.1 Column 1 4.015=60.0 36.0 Internal connection diagram 32 1 16 Row1 17 32 Row16 18 17 31 16 15 2 1 33 48 33 1 dot Column16 48 Column1 Red Yellow-green LT5026ED 188 Notice Internet In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/ Application Circuits NOTICE The circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. Manufacturing locations are also subject to change without notice. Observe the following points when using any devices in this publication. SHARP takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) The devices in this publication are designed for use in general electronic equipment designs such as: --- Personal computers --- Office automation equipment --- Telecommunication equipment [terminal] --- Test and measurement equipment --- Industrial control --- Audio visual equipment --- Consumer electronics (ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when SHARP devices are used for or in connection with equipment that requires higher reliability such as: --- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) --- Traffic signals --- Gas leakage sensor breakers --- Alarm equipment --- Various safety devices, etc. (iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: --- Space applications --- Telecommunication equipment [trunk lines] --- Nuclear power control equipment --- Medical and other life support equipment (e.g., scuba). Contact a SHARP representative in advance when intending to use SHARP devices for any "specific" applications other than those recommended by SHARP or when it is unclear which category mentioned above controls the intended use. If the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export such SHARP devices. This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. Express written permission is also required before any use of this publication may be made by a third party. Contact and consult with a SHARP representative if there are any questions about the contents of this publication. 115