Features Applications n Compensated output n Direct-media monitoring n Gauge and absolute types n Isolated onboard electronics n Gold-plated KovarTM port option n RoHS compliant* Industrial: n Refrigerant systems n Water level & pressure monitoring **Medical Devices (low/medium risk): n Diagnostic/analysis equipment ***Heavy Equipment: n Oil & fuel systems n Exhaust gas pressure sensing BPS130 Series - 10 mm Analog High Pressure Sensor Electrical Characteristics Supply Voltage (Vs)............................................................................................................................. 4.5 V minimum, 5 V typical, 5.5 V maximum Supply Current................................................................................................................................................................................................10 mA Output Current................................................................................................................................................................................................2.5 mA Short Circuit Current......................................................................................................................................................................................25 mA Reverse Polarity Protection.............................................................................................................................................................................. -33 V Overvoltage Protection...................................................................................................................................................................................... 33 V Performance Characteristics Operating Temperature.................................................................................................................................. -40 C to +150 C (-40 F to +302 F) Storage Temperature..................................................................................................................................... -55 C to +150 C (-67 C to +302 F) Output Range Vout****.................................................................................................................................................................... 10 % to 90 % Vs Output Clamping Limit Vout****........................................................................................................................................................... 5% to 95% Vs Resolution (>12 bit DAC).......................................................................................................................................................................... 0.02 % FS Accuracy @ 25 C.................................................................................................................................................................................. 0.25 % FS Total Error Band @ -40 C to +150 C (-40 F to +302 F)...................................................................................................................... 2.5 % FS Static Proof Pressure................................................................................................................................................................... 2X full scale PSIA Burst Pressure.............................................................................................................................................................................. 3X full scale PSIA Lifetime Drift............................................................................................................................................................................................. 0.5 % FS Product Characteristics Media Compatibility............................................................................................................................................... Harsh media (air, liquid and gas) Moisture Sensitivity Level........................................................................................................................................................................................1 ESD Classification (HBM)................................................................................................................................................................................>4 kV Marking................................................................................... Partial model number, media compatibility, pressure type, pressure rating, lot code Standard Packaging.......................................................................................................................................250 pcs./13-inch reel or 100 pcs./tray Weight..................................................................................................................................................................................1.080 grams (0.038 oz) Cross Section Basic Circuit Schematic MEMS Sensing Element Capacitor Vs ANALOG OUT Solder Pad SSC Vout GND ASIC Pressure "Wetted" Materials: Silicon, glass, Au/Sn, ceramic (Ported version also contains Au and solder) Any material in contact with the media is considered a "wetted" material. Asia-Pacific: Tel: +886-2 2562-4117 * Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 * Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 * Email: americus@bourns.com www.bourns.com Note: Power supply decoupling and output filtering included. Consult factory for custom options such as supply voltage, temperature calibration range, output range accuracy specification, and update rate. * RoHS3 Directive 2015/863 Amendments of Annex II on March 31, 2015 ** Bourns(R) products have not been designed for and are not intended for use in "lifesaving," "life-critical" or "life-sustaining" applications nor any other applications where failure or malfunction of the Bourns(R) product may result in personal injury or death. See Legal Disclaimer Notice on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. *** Custom engineered solutions. Check with factory for availability. **** 5 V input voltage. "Kovar" is a trademark of CRS Holdings, Inc., Delaware. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. BPS130 Series - 10 mm Analog High Pressure Sensor Product Dimensions Manifold Mount 10.3 (0.406) 1.0 (0.039) 8.9 (0.350) 4.2 (0.165) .051 (0.020) DIA. 12.8 (0.504) 6.35 (0.250) 1.0 (0.039) DIA. 9.0 (0.354) 7.6 (0.299) Vs GND Vout 1.4 (0.055) 3.1 (0.122) (Electrical pin-out for all configurations) Single Port 0.8 DIA. (0.031) 1.3 DIA. (0.051) 8.6 (0.339) .051 (0.020) DIA. 7.9 (0.311) 3.1 (0.122) 5.1 (0.201) DIMENSIONS: 6.35 (0.250) MM (INCHES) 0.3 TOLERANCES: (0.012) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. BPS130 - 10 mm Analog High Pressure Sensor 3312 - 2Series mm SMD Trimming Potentiometer Product Dimensions (Continued) Single Port and Pins 10.86 (0.427) 0.51 TYP. (0.020) 2.54 (0.100) TYP. 0.25 TYP. (0.010) 2.54 (0.100) TYP. How To Order DIMENSIONS: MM (INCHES) 0.3 TOLERANCES: (0.012) BPS130 - H G 015P - 1 M G Model Series Analog Media Compatibility H = Certain Harsh Media Pressure Type A = Absolute G = Gauge Pressure (psi) 015P = 15 300P = 300 030P = 30 500P = 500 100P = 100 Terminal Pins 1 = No Terminal Pins 3 = Vertical Terminal Pins (Tray Packaging only) Port Style M = Manifold Mount S = Single Port Packaging Designator G = 250 pcs. per 13-inch Reel Blank = 100 pcs. per Tray Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. BPS130 - 10 mm Analog High Pressure Sensor 3312 - 2Series mm SMD Trimming Potentiometer Solder Profile TEMPERATURE (C) 300 250 C Max. (5 Seconds Max.) 200 Notes: 1. No clean solder paste is recommended. 2. Aqueous wash is not recommended. 3. Use of water soluble soldering flux should be avoided due to possible corrosion. 4. Multiple passes through the soldering process is not recommended. 5. Other SMD processes and profiles should be verified by the customer. 150 5 C 100 Time 80-100 Seconds 60 Seconds Max. Processing Method: Reflow soldering with infrared heat or forced air convection (only once). Packaging Specification 250 pieces per 13-inch reel. Meets specifications of EIA-481-1 or EIA-481-2. 12.7 DIA. (0.5) 3.81 (0.15) EQUAL SPACED 3 PLCS. 29.21 (1.15) 2.0 (0.079) 20.32 DIA. (0.8) 4.0 (0.157) 11.5 (0.453) 101.6 (4.0) 330.2 DIA. (13.0) 24.0 (0.945) 25.4 (1.0) DIMENSIONS: MM (INCHES) 16.0 (0.630) 0.25 TOLERANCES: (0.010) REV. 09/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns(R) products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, "Bourns"). Unless otherwise expressly indicated in writing, Bourns(R) products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns(R) products. The characteristics and parameters of a Bourns(R) product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns' knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns(R) product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns(R) product with other components in the user's application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns(R) product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns(R) product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns(R) product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns(R) product to meet the requirements of such industry standard or particular qualification. Users of Bourns(R) products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns(R) products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns(R) products in such unauthorized applications might not be safe and thus is at the user's sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns(R) standard products that are suitable for use in automotive applications on such products' data sheets in the section entitled "Applications." Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns(R) standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user's sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns(R) standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns(R) standard product in the data sheet as compliant with the AEC-Q standard or "automotive grade" does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns(R) standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns(R) standard products that are suitable for use in aircraft or space applications on such products' data sheets in the section entitled "Applications." Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns(R) standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user's sole risk. The use and level of testing applicable to Bourns(R) custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns(R) custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns(R) standard products shall also apply to such Bourns(R) custom products. Users shall not sell, transfer, export or re-export any Bourns(R) products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns(R) products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns(R) products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns(R) products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R