Vinyl Electrical Tape 35
Data Sheet July 2011
Description
Scotch® Vinyl Electrical Tape 35 is a 7 mil (0,178 mm) polyvinyl chloride (PVC) color-
coding tape. Outstanding electri cal a nd mechanical properties make this tape excellent
for use in phase identification, color coding of motor leads and piping systems, and for
marking safety areas. Scot ch® Tape 35 operates over a wide range of temperatures –
up to 221°F (105°C); applies smoothly and conforms well above 3 2°F (0 °C). This tape is
available in nine fade resistant colo rs.
Agency
Approvals & Self
Certifications
UL Listed - UL 510 Standard “Insulating Tape” (product category OANZ), File E129200;
meets UL 510 labeling for “flame-retardant” for vinyl electrical tape.
CSA Certification; Standard. C22.2 No. 197-M1983 “PVC Insulating Tape,” File LR
48769.
RoHS 2002/95/EC
RoHS Compliant 2002/95/EC” means that the product or part (“Product”) does not contain any of the
substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by
Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under RoHS. This
information represents 3M’s knowledge and belief, which may be based in whole or in part on information
provided by third party suppliers to 3M.
Applications
Color coding for phase ide ntification, job identification and safety
Insulating electrical wiring
Protecting electrical conductors, moto r leads and piping from moisture, alkalis, acids,
corrosion, abrasion and we ather
Installation
Apply in half-lapped layers with sufficient tension to conform and produce a uniform
covering. In most applications, this tensi on will reduce the tape width to approximately
60% of its original wi dth.
On a pigtail splice, wrap th e tape beyond the end of the wire and then fold back and
over-wrap, leaving a protective cushion to resist cut-through.
Wrap uphill, taping from a smaller diameter to a larger diameter surface. Apply the
tape with no tension on the last wrap to prevent flaggi ng.
Specifications
Scotch® Tape 35 is based on polyvinyl chloride (PVC) and/or its copolymers and has a
rubber-based, pressu re-sensitive adhesive. The tape shall be 7 mils thick, and be UL
Listed and marked per UL Standard 510 as “Flame-Retardant.” The tape shall be
compatible with synthetic cable insulations, jackets and splicing compounds. The tape
will remain stable and will not telescope more than 0.1 inches when maintained at
temperatures below 122°F (50°C).
1 of 2 3
Scotch® Vinyl Electrical Tape 35
2 of 2
Typical
Properties
Not for specifications. Values are typical, not to be considered minimum or maxi mum.
Properties measured at room temperature 73°F (23°C) unless otherwise stated .
Physical Property
(ASTM D1000, unless n oted) Typical Value
US units (metric)
Color(s) Blue, Brown, Gray, Green, Orange, Red,
Violet, White, Yellow
Adhesive Pressure-sensitive rubber
Thickness 7 mils (0,178 mm)
Continuous Operating Temperature (max) 221ºF (105ºC)
Breaking Strength 17 lb/in (30,3 N/10 mm)
Elongation (% at break) 225%
Adhesion to Steel 20 oz/in (2,2 N/10 mm)
Adhesion to Backing 20 oz/in (2,2 N/10 mm)
Flagging 0.1 in (2,5 mm)
Electrical Property
(ASTM D1000, unless n oted) Typical Value
US units (metric)
Voltage Rating (UL 510) 600 volts
Dielectric Breakdow n
Standard condition
Wet Condition (96 hrs @ 73.4ºF (23ºC)
8,750 volts*
7875 volts
*Note: Dielectri c s tre ngth 1250 V/mil
High Humidity Insulation Resistance > 1x 106 megohms
Shelf Life &
Storage
Scotch® Vinyl Electrical Tape 35 has a 5-year shelf life from date of manufacture when
stored in a humidity controlled storage (1 C/50°F to 27°C/80°F and <75% relative
humidity).
Availability
Please contact your local distributor; av ailable from 3M.com/electrical [Where to Buy] or
call 1.800.245.3573.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to
be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and
determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any
statements related to the product, which are not contained in 3M’s current publications, or any contrary statements
contained on your purchase order, shall have no force or effect unless expressly agreed upon, in writing, by an authorized
officer of 3M.
Warranty; Limited
Remedy; Limited
Liability
This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES NO OTHER
WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your
exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M
product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of the legal theory asserted.
Scotch is a registered trademark of 3M Company.
3
Electrical Markets Division
6801 River Place Boulevard
Austin, TX 78726-9000
800-245-3573
Fax: 800.245.0329
www.3M.com/electrical
Please recycle
© 3M 2011 All rights reserved
78-8124-4858-3 E