EZ Series
• Compact design for low-profile applications; Ratings from 5A to
18A @ 600 VAC
• SC R output for heavy indust rial l oads
• A C or D C con trol
• 1/4" fast-on t e rminals f or easy instal lati on
•
UL/CSA/VDE Approved, CE Compli ant to EN60950-1
PRODUCT SELECTION
Control Voltage 5A 12A 18A
4-15 VDC EZ240D5 EZ240D12 EZ240D18
15-32 VDC EZE240D12 EZE240D18
90-140 Vrms EZ240A12 EZ240A18
18-36 Vrms EZE240A12 EZE240A18
4-15 VDC EZ480D12 EZ480D18
15-32 VDC EZE480D12 EZE480D18
90-140 Vrms EZ480A12 EZ480A18
18-36 Vrms EZE480A12 EZE480A18
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (1)
Description 5 A 12 A 18 A 12 A 18 A
Operating Voltage (47-63Hz) [Vrms] 24-280 24-280 24-280 48-660 48-660
Transient Overvoltage [Vpk] 600 600 600 1200 1200
Maximum Off-State Leakage Current @ Rated Voltage [mArms](5) 0.1 0.1 0.1 0.1 0.1
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) 500 500 500 500 500
Maximum Load Current (4) [Arms] 512 18 12 18
Minimum Load Current [mArms] 150 150 150 150 150
Maximum Surge Current (16.6ms) [Apk] 40 150 200 150 200
Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.5 1.5 1.5 1.5 1.5
Thermal Resistance Junction to Case (Rjc ) [°C/W] 2 2 1.1 21.1
Maximum I2 t for Fusing (8.3 msec) [A2 sec] 95 95 170 95 170
Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5 0.5 0.5
INPUT SPECIFICATIONS (1)
Description EZ240D5 EZ240Dxx EZ480Dxx EZExxxDxx EZxxxAxx EZExxxAxx
Control Voltage Range 4-15 VDC 3-15 VDC 4-15 VDC 15-32 VDC 90-140 Vrms 18-36 Vrms
Minimum Turn-On Voltage 4.0 VDC 3.0 VDC 4.0 VDC 15.0 VDC 90.0 Vrms 18.0 Vrms
Minimum T urn -Off Voltage 1.0 VDC 1.0 VDC 1.0 VDC 1.0 VDC 10.0 Vrms 2.0 Vrms
Typical Input Current @ Nominal Voltage 13 mAdc 15 mAdc 15 mAd c 15 mAdc 10 mAdc 10 mAdc
Nominal Input Impedance 300 Ohm 300 Ohm 240 Ohm 1500 Ohm 10.6 k Ohm 1.8 k Ohm
Maximum Turn-On Time [msec] (6) 1/2 Cycle 1/2 Cycle 1/2 Cycle 1/2 Cycle 10 10
Maximum Turn-Off Time [msec] 1/2 Cycle 1/2 Cycle 1/2 Cycle 1/2 Cycle 40 40
GENERAL SPECIFICATIONS
Description Parameters
Dielectric Strength, Input/Output/Base (50/60Hz)( 3) 4000 Vrms *
Minimum Insulation Resistance (@ 500 V DC) 109 Ohm
Maximum Capacitance, Input/Output 8 pF
Ambient Operating Temperature Range -40 to 80 °C
Ambient Storage Temperature Range -40 to 125 °C
Weight (typical) 1.5 oz (43 g)
Encapsulation Ther ma lly conductive Epoxy
Terminals 0.25 Inch Faston
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
3) 240V, DC control models only, all others 2500VRMS
4) Heat sinking required, see derating curves.
5) Off- state leakage for snubbered version (suffix S) is 10.0mArms
6) Turn-on time for random turn-on ve rsions is 0.1 msec (DC Control Models) .
* 240V, DC control models only
WIRING DIAGRAM
MECHANICAL SPECIFICATIONS
DC CONTROL.
PIN 1: AC LOAD
PIN 2: AC LOAD
PIN 3: +DC CONTROL
PIN 4: -DC CONTROL
Note:
Recommended torque for mounting Screw is 8 – 14 in lb (1.1 – 1.6 Nm)
This assumes a s tandar d # 8-32 UNC screw
THERMAL DERATE INFORMATION
AGENCY APPROVALS
EN60950 : Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7:
UL E116950
C SA LR 81689
VDE 10139 UG (240 VDC Cont rol Only)
Rev. 062210
ANNEX - ENVIROMENTAL INFORMATION
