tyca Packaging 107-90015 Flectronics Specification 01/07/03 Rev. A Packaging Specification Sub D housing 1. SCOPE : BULK PACKAGING FOR SUB D HOUSING WITH TYCO LABEL 2. USED PACKAGING PHANTOM NUMBERS AND QUANTITIES Product Packaging Phantom Number UNIT Shipper QTY QTY Housing for 9 way connector 1485757-1 (C23334A9992A41} | 200 200 Housing for 15 way connector | 1486222-1 (C23334A9992A42) | 200 200 Housing for 25 way connector | 8-1392022-1 200 200 Housing for 37 way connector | 1486223-1 (C23334A9992A43) | 200 200 Housing for 50 way connector | 1486223-1 (C23334A9992A43) | 200 200 3. PACKAGING COMPOSITION Composition of 1485757-1 Packaging material PNR Description Quantity 6-1393595-5 Minigrip 130*200 4 1486337-1 PE BAG 500*600*0.05 2 1392029-3 Box (F42048V7126C 3) 1 999639-1 Licence tag Label 1 Composition of 1486222-1 Packaging material PNR Description Quantity 6-1393595-5 Minigrip 130*200 4 1486337-1 PE BAG 500*600*0.05 2 1392029-4 Box (F42048V7126C 4) 1 999639-1 Licence tag Label 1 Composition of 8-1392022-1 Packaging material PNR Description Quantity 6-1393595-5 Minigrip 130*200 4 1486337-1 PE BAG 500*600*0.05 2 4-1393596-8 Box (C23334A9990C69) 1 999639-1 Licence tag Label 1 DR. Van Reybrouck DATE 10/07/01 APVD. Verougstracte EC-S8R10-0003-03 DATE 01/07/03 Tyco Electronics Corporation This controlled document is subject to change. 1 f ? Alrinterstional Rights Reserved Cees are available ron REDE and AMECentral Trademark indicates change R1-1 (Rev. 02-00) LOC GW tyca / Electronics Composition of 1486223-1 Packaging material PNR Description Quantity 6-1393595-5 Minigrip 130*200 4 1486337-1 PE BAG 500*600*0.05 2 1485832-1 Box (C23334A9990C52) 1 999639-1 Licence tag Label 1 4. PACKAGING METHOD -Close bottom side of the box with transparant PP-tape. -Put one shell type in a PE Bag. Dont close the bag. -Put this bag into the box and spread the shells carefully over the bottom surface of the box. -Fold the top of the bag in C shape over its filled content. 107-90015 -Do the same for the second shell type and place this bag above the one already in the box. -Accessories like screws and claps are packed per type separately in the heat sealed bags. -Put the accessories on top of the shells. -Close the top side of the box with transparant PP-tape. -Put the label on the short side of the box, in the upper right corner. -When palletizing the boxes , keep the labels visible. Rev. A R1-1 (Rev. 02-00) Page 2 of 2