SBR100-10JS
No. A0560-1/3
Applications
•High frequency rectification (switching regulators, converters, choppers).
Features
•Low reverse current.
•Low switching noise.
•High reliability due to planar structure.
•Attachment workability is good by Mica-less package.
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Repetitive Peak Reverse Voltage VRRM 100 V
Nonrepetitive Peak Reverse Surge Voltage VRSM 105 V
Average Output Current IO50Hz resistive load, Tc=107°C10A
Surge Forward Current IFSM 50Hz sine wave, 1 cycle 80 A
Junction Temperature Tj --55 to +150 °C
Storage Temperature Tstg --55 to +150 °C
Electrical Characteristics at Ta=25°C
Ratings
Parameter Symbol Conditions min typ max Unit
Reverse Voltage VRIR=2mA, Tj=25°C* 100 V
Forward Voltage VFIF=5A, Tj=25°C* 0.85 V
Reverse Current IRVR=50V, Tj=25°C* 100 µA
Interterminal Capacitance C VR=10V, Tj=25°C* 170 pF
Thermal Resistance Rth(j-c) Junction-Case : Smoothed DC 4.0 °C / W
Note) * : Value per element
SANYO Semiconductors
DATA SHEET
Ordering number : ENA0560
N0806SD SY IM TC-00000297
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before usingany SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
SBR100-10JS Schottky Barrier Diode (Twin Type · Cathode Common)
100V, 10A Rectifier
SBR100-10JS
No. A0560-2/3
Package Dimensions Electrical Connection
unit : mm (typ)
7525-001 Anode Anode
Cathode
1 : Anode
2 : Cathode
3 : Anode
SANYO : TO-220ML(LS)
0.75
0.7
123
10.0
3.5
7.2
16.0
14.0 3.6
1.2
1.6
2.55
2.55
4.5 2.8
2.4
3.2
0
0.1
1.0
7
5
3
2
10
7
5
3
2
7
5
3
2
1.20.4 0.8
Forward Voltage, VF -- V
IF -- VF
Forward Current, IF -- A
IT05463
Reverse Voltage, VR -- V
IR -- VR
Reverse Current, IR -- mA
IT05464
0
1.0
10
5
7
3
2
5
7
3
2
5
7
3
2
5
7
3
2
0.1
12020 40 60 80 100
Peak Reverse Voltage, VRM -- V
PR(AV) -- VRM
Average Reverse Power Dissipation, PR(AV) -- W
IT05466
Average Output Current, IO -- A
PF(AV) -- IO
Average Forward Power Dissipation, PF(AV) -- W
IT05465
0
0
2.5
0.5
1.0
1.5
2.0
0
2
4
6
8
12
10
14
11010 20 30 40 50 60 70 80 90 100
02468101214
Tj=150°C
25°C
Tj=
150
°
C typ
(1)Rectangular wav
e θ
=300
°
(2)Rectangular wav
e θ
=240
°
(3)Rectangular wav
e θ
=180
°
(4)Sine wav
e θ
=180
°
(1)Rectangular wav
e θ
=60
°
(2)Rectangular wav
e θ
=120
°
(3)Rectangular wav
e θ
=180
°
(4)Sine wav
eθ
=180
°
(1)
(1)
(2)
(2)
(3)
(4)
(4)
(3)
180°
θ360°
360°
Rectangular
wave
Sine
wave
Rectangular
wave
Sine
wave
VR
VR
180°
θ360°
360°
125
°
C typ
100
°
C typ
75
°
C typ
SBR100-10JS
No. A0560-3/3PS
Specifications of any and all SANYO Semiconductor products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state,
and are not guarantees of the performance, characteristics, and functions of the described products
as mounted in the customer's products or equipment. To verify symptoms and states that cannot be
evaluated in an independent device, the customer should always evaluate and test devices mounted
in the customer's products or equipment.
SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any
and all semiconductor products fail with some probability. It is possible that these probabilistic failures
could give rise to accidents or events that could endanger human lives, that could give rise to smoke or
fire, or that could cause damage to other property. When designing equipment, adopt safety measures
so that these kinds of accidents or events cannot occur. Such measures include but are not limited to
protective circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO Semiconductor products (including technical data,services) described
or contained herein are controlled under any of applicable local export control laws and regulations, such
products must not be exported without obtaining the export license from the authorities concerned in
accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic
or mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO Semiconductor product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not
guaranteed for volume production. SANYO Semiconductor believes information herein is accurate
and reliable, but no guarantees are made or implied regarding its use or any infringements of
intellectual property rights or other rights of third parties.
Rth(j - c) -- t
Transient Thermal Resistance Rth(j - c) -- °C / W
Time, t -- s
IT05470
0.001
0.1
10
2
3
5
7
1.0
2
3
5
7
23 57
0.01 23 57
0.1 23 57
1.0 23 235710
IFSM -- t
Surge Forward Current, IFSM(Peak) -- A
Time, t -- s
IT05469
0.01
0
10
20
30
40
50
70
60
80
90
23 57
0.1 1.0
23 2357
I
S
20ms
t
Current waveform 50Hz sine wave
C -- VR
Interterminal Capacitance, C -- pF
Reverse Voltage, VR -- V
IT05468
1.0
10
1000
2
3
5
7
100
2
3
5
7
100
23 57
10 23 57
f=100kHz
Tc -- IO
Case Temperature, Tc -- °C
Average Output Current, IO -- A
IT05467
100
110
120
130
140
150
90
160
0246810 1412
(1)Rectangular wave θ=60°
(2)Rectangular wave θ=120°
(3)Rectangular wave θ=180°
(4)Sine wave θ=180°
(1) (2) (4) (3)
180°
θ360°
360°
Rectangular
wave
Sine
wave
This catalog provides information as of November, 2006. Specifications and information herein are subject
to change without notice.
