Com-10Gb + Harsh Environment 10Gb Ethernet Micro Connectors 15mm Description Com-Series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the highest resistance for use in the harshest environments. Main Features: * * * * * * 10Gb+: exceeds 10Gb/s Ethernet following IEEE 802.3an-2006: 10GBase-T Cat.6A connector according to TIA568C.2 and ISO/IEC11801 standard Environmental testing based on MIL-DTL-38999 series III military specifications (Thread version) Environmental testing based on MIL-DTL-26482 military specifications (Push Pull version) Miniature : 15 mm(.59) max external diameter Receptacle and in-line receptacle compatible with both thread and Push Pull plugs * * 4 pairs totally insulated throughout the connector minimum cross-talk between the four pairs Patented special interfacial shapes minimum perturbation at the interface of each pair * Thread and Push Pull coupling mechanisms 2000 mating cycles & high vibration resistance * Machined Brass shells Plating available: Olive Drab Cadmiumnot ROHS compliant Black Nickel, and unplated brassROHS compliant shell to shell continuity and 500h salt spray resistance * Machined & gold plated Solder and Crimp contacts design & performance according to the innercontact of M39029/77-429#16 M39029/76425#16 38999 contact contacts are crimped with standard crimping tool M22520/2-01 + Amphenol Com positioner * * Solder contact : max AWG24 Crimp contact : AWG 24 to 28 * IP68 sealing mated and unmated for PCB receptacles * 1500 Vrms Dielectric Withstanding Voltage * Temperature range : - 55C / + 125C Markets & Applications C4ISR Ground Vehicle Applications : Shipboard In Flight Entrertainment* *Com approved by GORE www.amphenol-socapex.com Due to technical progress, all information provided is subject to change without prior notice Designed by Amphenol Socapex Navy Commercial Aerospace Railways Com-10Gb + Transmission Data Com-10Gb + Excee ds 10Gb/s Ether require net ment Female Receptacles Female receptacle for printed circuit board Compatible with both thread & push pull plugs Part number: UCOM-10G+ R P x x: see the 'How to order' below to complete your part number Amphenol performance IEEE 802.3an Standard requirement Panel mount female receptacle with metallic band backshell Compatible with both thread & push pull plugs IEEE 802.3an Standard requirement Part number: UCOM-10G+ R x x x: see the 'How to order' below to complete your part number Amphenol performance Nota: metallic band and heatshrink sleeve are provided with the connector IEEE 802.3an Standard requirement How to Order Female Receptacles UCOM - 10G+ Shell Amphenol performance R P R: receptacle (push pull or thread) Contacts termination P: PCB S: solder C: crimp Shell plating B: black nickel G: olive drab cadmium U: unplated brass www.amphenol-socapex.com Due to technical progress, all information provided is subject to change without prior notice Designed by Amphenol Socapex www.amphenol-socapex.com Due to technical progress, all information provided is subject to change without prior notice Designed by Amphenol Socapex B NOTA: * UCOM for order designation * Com for marking on connectors Com-10Gb + Com-10Gb + Male Plugs Female in-line Receptacles Female in-line receptacle with cable gland backshell Plug with cable gland backshell Compatible with both thread & push pull plugs Part number: UCOM-10G+ L x x G x x: see the 'How to order' below to complete your part number Part number: UCOM-10G+ P T x x G x x: see the 'How to order' below to complete your part number Part number: UCOM-10G+ P P x x G x x: see the 'How to order' below to complete your part number Thread version Push Pull version Female in-line receptacle with metallic band backshell Plug with metallic band backshell Compatible with both thread & push pull plugs Part number: UCOM-10G+ L x x B x: see the 'How to order' below to complete your part number Part number: UCOM-10G+ P T x x B x: see the 'How to order' below to complete your part number Part number: UCOM-10G+ P P x x B x: see the 'How to order' below to complete your part number 59 [2.32] 70 [2.75] 59 [2.32] Thread version Nota: Metallic band and heatshrink sleeve are provided with the connector Push Pull version Nota: Metallic band and heatshrink sleeve are provided with the connector How to Order Female in-line Receptacles How to Order Male Plugs UCOM - 10G+ Shell P T C B G UCOM - 10G+ A Contacts termination C: crimp NOTA: * UCOM for order designation * Com for marking on connectors C: crimp S: solder Shell plating B: black nickel S: solder G: olive drab cadmium B: black nickel Backshell type U: unplated brass Shell plating G: gland G: olive drab cadmium U: unplated brass B: band G: gland A: for cable diam 7.5mm B: band For other cable diameter, please consult us Cable diameter (for gland backshell only) Backshell type Cable diameter (for gland backshell only) A: for cable diam 7.5mm www.amphenol-socapex.com Due to technical progress, all information provided is subject to change without prior notice Designed by Amphenol Socapex B G A Contacts termination Mating (for plugs only) P: push-pull S L: in line receptacle (push pull or thread) P: plug T: thread L Shell For other cable diameter, please consult us www.amphenol-socapex.com Due to technical progress, all information provided is subject to change without prior notice Designed by Amphenol Socapex NOTA: * UCOM for order designation * Com for marking on connectors Com-10Gb + Com-10Gb + Com plug - Com inline receptacle Cordsets Part number: UCOM-10G+ F x x x xxx Connector number x: see the 'How to order' below to complete your part number Com plug - Com plug cordset Part number: UCOM-10G+ C x x x xxx x: see the 'How to order' on the next page to complete your part number Type of cable used: CAT 7 HFFR - According to EN 50288-4-2 Stranded bare copper wire (26 AWG) * 4 screened twisted pairs: 2 wires twisted to a pair, Alulaminate foil overlapped * Shield braiding of tinned copper wires, about 80% coverage * Strain member of Kevlar * Jacket in black Polyurethane (PUR), glossy finish, acc to DIN VDE 0282 * External diameter 7.0 +/-0.3 mm * UV & Hydrolysis resistant, Halogen free, RoHS compliant * Max Pull force: 800 N, Weight : about 54 kg/km * Temperature : - 40C / + 85C * Min. bending radius allowed: repeated 8 x 0, single 4 x 0 GORE (R) has approved Com assembled onto their cat6A cable P/N : RCN9034-24. Information available on GORE(R) website. Com plug - RJ45 Cat6A plug cordset How to Order Cordsets Part number: UCOM-10G+ D x x x xxx x: see the 'How to order' on the next page to complete your part number * UCOM - 10G+ Shell C T C B 015 C: Com plug - Com plug cordset RJ45 Cat6A plug D: Com plug - RJ45 Cat6A plug cordset E: Com panel mount receptacle - RJ45 Cat6A plug cordset F: Com plug - Com inline receptacle cordset Open versions: G: Com plug - no connector at the end H: Com panel mount receptacle - no connector at the end J: Com inline receptacle - no connector at the end Mating (for plugs only) T: thread Com panel mount receptacle - RJ45 Cat6A plug Contacts termination C: crimp Part number: UCOM-10G+ E x x xxx x: see the 'How to order' on the next page to complete your part number S: solder Shell plating B: black nickel G: olive drab cadmium RJ45 Cat6A plug U: unplated brass Total length - For other lengths, please consult us. 002: 20 cm [7.87] 005: 50 cm [19.68] 010: 1.0 m [39.37] 015: 1.5 m [59.05] 020: 2.0 m [78.74] 050: 5.0 m [196.85] 100: 10.0 m [393.70] www.amphenol-socapex.com Due to technical progress, all information provided is subject to change without prior notice Designed by Amphenol Socapex www.amphenol-socapex.com Due to technical progress, all information provided is subject to change without prior notice Designed by Amphenol Socapex NOTA: * UCOM for order designation * Com for marking on connectors Com-10Gb + Accesories CAPS for receptacles IP68 neoprene cap - Part number: 31091 Nota: plan a type M3 hole on the panel IP68 metallic cap x to be replaced by B for Black electrophoresis plating G for Olive drab cadmium plating U for Unplated brass 31057 x 31139 x O4,1 [0,161] IP68 metallic cap with metallic tie on panel Nota: plan a hole on the panel CAPS for plugs Cap in neoprene Part number: 31092 O12 [0,48] Or IP68 metallic cap with a 012 fixation ring CAPS for in line receptacles Cap in neoprene Part number: 31093 Dummy female receptacle Part number: 31131 x x to be replaced by B for Black nickel plating G for Olive drab cadmium plating U for Unplated brass Spares Crimp Pin Part number: 31073 Crimp Socket Part number: 31074 Tools * Nut clamping tool for receptacle Part number: 31055 Only for RPx receptacles * Insertion tool for crimp contacts Part number: 31056 Other tools: * Brazing tool for receptacle & in-line receptacle Part number: 31132 * Contact positioner for M22520/2-01 crimping tool Part number: 31095 * Brazing tool for plug Part number: 31133 Nota: the cabling instructions are available upon demand (ref. N00-040190-00). Amphenol Socapex 948, promenade de l'Arve BP29 74311 Thyez Cedex - France Phone: +33 (0)4 50 89 28 00 contact@amphenol-socapex.fr We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing. www.amphenol-socapex.com Follow Amphenol Socapex on social media : Designed by Amphenol Socapex DOC-000015-ANG - August 2017