FO-5$112-C 4 3 v 2 | HONE YWELL REV| DOCUMENT CHANGED BY CHECK PART NUMBER C | 0072603 BM _21DEC10 | DSK 142PCO5DW70 GENERAL OPERATING CHARACTERISTICS PRESSURE RANGE Q TO 259mm Hg (0 TO 5 PSI) OVERPRESSURE Z\ 20 PSID 7.1 TEMPERATURE RANGES [STORAGE =55 TO +125C OPERATE 5C TO 55C COMPENSATED 5C TO 45C -@5) SUPPLY VOLTAGE 7 TO 16 VDC SUPPLY CURRENT 20mA MAX WITH 10K LOAD OUTPUT VOLTAGE PROPORTIONAL TO SUPPLY VOLTAGE OUT GND IN+ 12.6 OVER ABOVE RECOMMENDED RANGE G) _ L _ SHORT CIRCUIT LIMIT MAY BE SHORTED INDEFINITELY OUTPUT RIPPLE NONE GROUND REFERENCE SUPPLY AND OUTPUT ARE COMMON COMMON MODE PRES. 125 PSIG_ MAX. MECHANICAL SHOCK MIL-STD-202 METHOD 213 TEST CONDITION A VIBRATION SINE SWEEP | MIL-STD-202 METHOD 204 crEEN ZA\ ELECTRICAL PERFORMANCE AT 25C AND 8.0020.01 VDC SUPPLY OUTPUT VOLTAGE pack A\ NULL (0 PSD 0020.05 VDC reo A\ FULL SCALE (5 PSI 1259mm Haga) 6.0020.10 VDC (P2 > Pt) fe F.S.0. AX 5.0020.05 VDC (P2 > PI) SENSITIVITY 19.33mV/mm_ Hg (1.0 V/PS) i fl ff LINEARITY (%F.S.0.) Z5\ (BFSL) 20.75 MAX (P2 < P1) | 21.50 MAX (P2 > P1) HYSTERESIS & REPEATABILITY (%F.S.0.) /5\| 20.25 TYP 300.0 + 25.0 17.9 18.5 TEMPERATURE ERROR (%F.S.0.) ZD\ | | 5C < 25C > 45C 21.5 MAX RESPONSE _TIME Im_ SEC MAX I NOTES 10.0 1 INPUT MEDIA: pI 1 P1 DRY GASES ONLY: CONNECTION SIDE OF SENSOR P2 LIMITED ONLY TO THOSE MEDIA THAT WILL NOT ATTACK POLYESTER, SILICON OR SILICONE BASED ADHESIVE 2 TERMINALS ARE PLATED,FOR SOLDERING 3 LIMIT SOLDERING TO 315C MAX FOR 10 SECONDS MAX 2X @5.00 4 UNITS ARE OF PLASTIC CONSTRUCTION /\, F.S.0. IS THE ALGEBRAIC DIFFERENCE BETWEEN THE OUT be PUT END POINTS (NULL AND FULL PRESSURE) he 59.8 | STRIPPED & TINNED LEAD ENDS TO BE 5,0 MAX MAXIMUM DIFFERENTIAL PRESSURE ALLOWABLE IS 20 PSI INPUT PORT (P1) BETWEEN P1 AND P2 8 NO CHANGES TO MATERIALS WITHOUT PRIOR COMMON MODE 2X (1.5) INPUT PORT (P2) PRESSURE TESTING AT OPERATING TEMPERATURE SWITCH 6.1 30.0 16.2<_e-12.3 2X D3.52 MOUNTING HOLES RELEASE NO. | PR-17830 as $2.40. DESIGN UNITS: MM DRAWN JAS O8MAY09 TOLERANCES UNLESS NOTED: CHECK JAS O8MAY09 Honeywell NO PLACES =k THIS DRAWING COVERS A PROPRIETARY ITEM ONE PLACE Xx 0.4 AND IS THE PROPERTY OF HONEYWELL. TITLE THIS DRAWING 1S NOT TO BE COPIED OR USED TRANSDUCER Two Pace ot 0-15) "WITHOUT THE PERMISSION OF HONEYWELL. PRESSURE a | Pre AES rae (ER pace er H OH OH OH EF a RASTER SCALE_NONE [WEIGHT 31 GRAMS SHEET 1 OF | 2 |