1
PH CONNECTOR
2.0 mm pitch/Disconnectable Crimp style connectors
PH CONNECTOR
High box type
PH CONNECTOR
High box type
PH CONNECTOR
High box type
High box type
Specifications
• Current rating: 2 A AC/DC (AWG #24)
• Voltage rating: 100 V AC/DC
• Temperature range: -25℃ to +85℃
( including temperature rise in applying
electrical current)
• Contact resistance: Initial value/ 10 mΩ max.
After environmental tests/ 20 mΩ max.
• Insulation resistance: 1,000 MΩ min.
• Withstanding voltage: 800 VAC/minute
• Applicable wire: AWG #30 to #24
• Applicable PC board thickness: 0.8 to 1.6 mm
* In using the products, refer to "Handling Precaution for Terminal
and Connector" described on our website (Technical documents
of Product information page).
* Contact JST for details.
* RoHS2 compliance
Standards
Recognized E60389
R75087
φ0.8
+0.1
0
1.4
1.5
2
±0.05
±0.05
±0.05
φ1
+0.1
0
PHコネクタ表1
Material and Finish
Model No. Applicable wire Q'ty/
reel
mm
2
AWG #
Insulation O.D.
(mm)
Phosphor bronze, tin-plated (reflow treatment)
SPH-002T-P0.5S
0.05~0.22 30~24 0.8~1.5 8,000
RoHS2 compliance
Note: Contact JST for fully automatic crimping applicator.
Note: 1. The above figure is the figure viewed from the connector mounting side.
2. Tolerances are non-cumulative: ±0.05 mm for all centers.
3. Hole dimensions differ according to the type of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should
be larger. The hole dimensions shown above are reference values. Contact JST for details.
Contact
PH connector high box type, with 17 mm
mounting height and with 4.5 mm
thickness.
● Signal side connector is common use with
the normal PH connector, and it is compatible
with insulation displacement type KR connector.
PC board layout and Assembly layout
SPH-002T-P0.5S
Contact
Crimping
machine
Crimp applicator with dies
AP-K2N MKS-L
MK/SPH-002-0
5S
APLMK S
PH002-0
5S
Crimp applicator
Dies
Applicator