X5R Dielectric General Specifications GENERAL DESCRIPTION * General Purpose Dielectric for Ceramic Capacitors * EIA Class II Dielectric * Temperature variation of capacitance is within 15% from -55C to +85C * Well suited for decoupling and filtering applications * Available in High Capacitance values (up to 100F) PART NUMBER (SEE PAGE 4 FOR COMPLETE PART NUMBER EXPLANATION) 1210 4 D Size Voltage (L" x W") 4 = 4V 0101** 6 = 6.3V 0201 Z = 10V 0402 Y = 16V 0603 3 = 25V 0805 D = 35V 1206 5 = 50V 1210 1 = 100V 1812 **EIA 01005 107 Dielectric D = X5R Capacitance Code (In pF) 2 Sig. Digits + Number of Zeros M A T 2 A Capacitance Tolerance K = 10% M = 20% Failure Rate A = N/A Terminations T = Plated Ni and Sn Packaging 2 = 7" Reel 4 = 13" Reel Special Code A = Std. NOTE: Contact factory for availability of Tolerance Options for Specific Part Numbers. Contact factory for non-specified capacitance values. Insulation Resistance (Ohm-Farads) TYPICAL ELECTRICAL CHARACTERISTICS 20 15 % Capacitance 10 0 -5 -10 -15 -20 -60 -40 -20 0 +20 +40 +60 +80 Temperature C 10,000 Insulation Resistance vs Temperature 1,000 100 0 20 40 60 80 100 120 Temperature C The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 121720 25 X5R Dielectric Specifications and Test Methods Parameter/Test Operating Temperature Range Capacitance X5R Specification Limits -55C to +85C Within specified tolerance Measuring Conditions Temperature Cycle Chamber Dissipation Factor 2.5% for 50V DC rating 12.5% for 25V, 35V DC rating 12.5% Max. for 16V DC rating and lower Contact Factory for DF by PN Freq.: 1.0 kHz 10% Voltage: 1.0Vrms .2V For Cap > 10 F, 0.5Vrms @ 120Hz Insulation Resistance 10,000M or 500M - F, whichever is less Charge device with rated voltage for 120 5 secs @ room temp/humidity Dielectric Strength No breakdown or visual defects Charge device with 250% of rated voltage for 1-5 seconds, w/charge and discharge current limited to 50 mA (max) Appearance Resistance to Flexure Stresses Capacitance Variation Dissipation Factor Insulation Resistance Solderability Appearance Resistance to Solder Heat Thermal Shock Capacitance Variation Dissipation Factor 26 Initial Value x 0.3 95% of each terminal should be covered with fresh solder Dip device in eutectic solder at 230 5C for 5.0 0.5 seconds No defects, <25% leaching of either end terminal 7.5% Meets Initial Values (As Above) Dielectric Strength Meets Initial Values (As Above) Appearance No visual defects Capacitance Variation Dissipation Factor Dissipation Factor Deflection: 2mm Test Time: 30 seconds Meets Initial Values (As Above) Meets Initial Values (As Above) Capacitance Variation Load Humidity 12% Insulation Resistance Insulation Resistance Dielectric Strength Appearance Load Life No defects Dip device in eutectic solder at 260C for 60seconds. Store at room temperature for 24 2hours before measuring electrical properties. Step 1: -55C 2 30 3 minutes 7.5% Step 2: Room Temp 3 minutes Meets Initial Values (As Above) Step 3: +85C 2 30 3 minutes Meets Initial Values (As Above) Step 4: Room Temp 3 minutes Meets Initial Values (As Above) Repeat for 5 cycles and measure after 24 2 hours at room temperature No visual defects 12.5% Initial Value x 2.0 (See Above) Charge device with 1.5X rated voltage in test chamber set at 85C 2C for 1000 hours (+48, -0). Insulation Resistance Initial Value x 0.3 (See Above) Note: Contact factory for *optional specification part numbers that are tested at < 1.5X rated voltage. Dielectric Strength Meets Initial Values (As Above) Remove from test chamber and stabilize at room temperature for 24 2 hours Appearance No visual defects Capacitance Variation 12.5% Dissipation Factor Initial Value x 2.0 (See Above) Insulation Resistance Initial Value x 0.3 (See Above) Dielectric Strength Meets Initial Values (As Above) Store in a test chamber set at 85C 2C/ 85% 5% relative humidity for 1000 hours (+48, -0) with rated voltage applied. Remove from chamber and stabilize at room temperature and humidity for 24 2 hours before measuring. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 042418 X5R Dielectric Capacitance Range PREFERRED SIZES ARE SHADED Case Size Soldering Packaging (L) Length W) Width (t) Terminal Voltage: Cap (pF) 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 Cap (F) 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 10 22 47 100 Voltage: Case Size mm (in.) mm (in.) mm (in.) 101 151 221 331 471 681 102 152 222 332 472 682 103 150 223 333 473 689 104 154 224 334 474 684 105 155 225 335 475 106 226 476 107 0101* Reflow Only Paper/Embossed 0.40 0.02 (0.016 0.0008) 0.20 0.02 (0.008 0.0008) 0.10 0.04 (0.004 0.0016) 6.3 10 B B B B B B B B B B B B B B B B B B B B B B B B B 0201 Reflow Only All Paper 0.60 0.09 (0.024 0.004) 0.30 0.09 (0.011 0.004) 0.15 0.05 (0.006 0.002) 6.3 10 16 4 A A A A A A A A A A A A 25 A A A A A A A A A A A A A A A A A A A A A A A A A A B A A B A A A A C C C C C C 4 6.3 6.3 10 0101* C 10 16 0201 25 4 0402 Reflow/Wave All Paper 1.00 0.20 (0.040 0.008) 0.50 0.20 (0.020 0.008) 0.25 0.15 (0.010 0.006) 6.3 10 16 25 C C C C C C C C C C C C C C C C 50 4 6.3 0603 Reflow/Wfeve All Paper 1.60 0.15 (0.063 0.006) 0.81 0.15 (0.032 0.006) 0.35 0.15 (0.014 0.006) 10 16 25 35 50 G G G G G G G G G G J G G G G G G G G G G G G G G J G G J J K K G K K K C C C C C C C C C C C C C C C C C E C C C C G G G C C C C C E E E E E G E E E G J J K K K G J J J K K J J J K K 4 6.3 4 6.3 10 10 16 0402 25 50 G G G G G 16 25 0603 G 35 50 4 0805 Reflow/Wfeve Paper/Embossed 2.01 0.20 (0.079 0.008) 1.25 0.20 (0.049 0.008) 0.50 0.25 (0.020 0.010) 6.3 10 16 25 35 N P P P N P P P P N N J P P P 4 6.3 10 N N N N N N N N N N N N N P P 50 N N N N N N P P P P P P P N P P P P 16 25 0805 35 50 Letter A B C E G J K M N P Q X Y Z Max. Thickness 0.33 (0.013) 0.22 (0.009) 0.56 (0.022) 0.71 (0.028) 0.90 (0.035) 0.94 (0.037) 1.02 (0.040) 1.27 (0.050) 1.40 (0.055) 1.52 (0.060) 1.78 (0.070) 2.29 (0.090) 2.54 (0.100) 2.79 (0.110) PAPER EMBOSSED PAPER and EMBOSSED available for 01005 NOTE: Contact factory for non-specified capacitance values *EIA 01005 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 121520 27 X5R Dielectric Capacitance Range PREFERRED SIZES ARE SHADED Case Size Soldering Packaging (L) Length W) Width (t) Terminal Voltage: Cap (pF) 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 Cap (F) 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 10 22 47 100 Voltage: Case Size Letter Max. Thickness mm (in.) mm (in.) mm (in.) 101 151 221 331 471 681 102 152 222 332 472 682 103 150 223 333 473 689 104 154 224 334 474 684 105 155 225 335 475 106 226 476 107 4 X X X X X 4 1206 Reflow/Wave Paper/Embossed 3.20 0.40 (0.126 0.016) 1.60 0.30 (0.063 0.012) 0.50 0.25 (0.020 0.010) 6.3 10 16 25 35 Q X X X X X 6.3 Q Q X X X X 10 50 4 1210 Reflow Only Paper/Embossed 3.20 0.40 (0.126 0.016) 2.50 0.30 (0.098 0.012) 0.50 0.25 (0.020 0.010) 6.3 10 16 25 35 50 X X Q Q Q Q Q X X X Q Q Q Q X Z Z X X X X X X X X X X X Z Z Z Z Z Z Z Z 16 25 1206 35 50 16 25 1210 35 50 A B C E 0.33 0.22 0.56 0.71 (0.013) (0.009) (0.022) (0.028) PAPER Z Z Z 4 X Z Z Z 6.3 Z X Z Z 10 Z Z Z Z G J K M N 0.90 0.94 1.02 1.27 1.40 (0.035) (0.037) (0.040) (0.050) (0.055) 1812 Reflow Only All Embossed 4.50 0.30 (0.177 0.012) 3.20 0.20 (0.126 0.008) 0.61 0.36 (0.024 0.014) 10 16 25 4 6.3 Z Z Z 4 6.3 10 NOTE: Contact factory for non-specified capacitance values *EIA 01005 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 021020 50 35 50 Z 16 25 1812 P Q X Y 1.52 1.78 2.29 2.54 (0.060) (0.070) (0.090) (0.100) EMBOSSED PAPER and EMBOSSED available for 01005 28 Z 35 Z 2.79 (0.110)