5 mm wide
Low coil power
PCB or 93 series sockets
1
1 CO (SPDT)
6/10
250/400
1,500
300
0.185
6/0.2/0.12
500 (12/10)
AgNi
5 - 12 - 24 - 48 - 60
—/0.17
(0.7…1.5)UN
—/0.4 UN
—/0.05 UN
—/10 · 106
60 · 103
5/3
6 (8 mm)
1,000
–40…+85
RT II
34.51
Contact specification
Contact configuration
Rated current/Maximum peak current A
Rated voltage/Maximum switching voltage
V AC
Rated load AC1 VA
Rated load AC15 (230 V AC) VA
Single phase motor rating (230 V AC) kW
Breaking capacity DC1: 30/110/220 V A
Minimum switching load mW (V/mA)
Standard contact material
Coil specification
Nominal voltage (UN) V AC (50/60 Hz)
V DC
Rated power AC/DC VA (50 Hz)/W
Operating range AC
DC
Holding voltage AC/DC
Must drop-out voltage AC/DC
Technical data
Mechanical life AC/DC cycles
Electrical life at rated load AC1 cycles
Operate/release time ms
Insulation between coil and contacts (1.2/50 μs)
kV
Dielectric strength between open contacts V AC
Ambient temperature range °C
Environmental protection
Approvals (according to type)
Copper side view
Features
Ultra-slim 1 Pole - 6 A relay
Printed circuit mount
- direct or via PCB socket
35 mm rail mount
- via screw, screwless or push-in terminal sockets
1 Pole changeover contacts or
1 Pole normally open contact
Ultra slim, 5 mm, package
Sensitive DC coil - 170 mW (Dual AC/DC coil
drive possible using 93 series sockets)
UL Listing (certain relay/socket combinations)
Cadmium Free contact materials
8/8 mm clearance/creepage distance
6 kV (1.2/50 μs) insulation, coil-contacts
FOR UL RATINGS SEE:
“General technical information” page V
For outline drawing see page 5
I-2015, www.findernet.com
34 Series - Slim electromechanical PCB relays 6 A 34
SERIES
A
2
34.81-9024 34.81-7048 34.81-8240
Output circuit
Contact configuration
Rated current/Maximum peak current (10 ms)
A
Rated voltage/Maximum blocking voltage V
Switching voltage range V
Repetitive peak off-state voltage Vpk
Minimum switching current mA
Max. “OFF-state” leakage current mA
Max. “ON-state” voltage drop V
Input circuit
Nominal voltage V DC
Rated power AC/DC W
Operating range V DC
Control current mA
Release voltage V DC
Impedance Ω
Technical data
Operate/release time ms
Dielectric strength between input/output V
Ambient temperature range °C
Environmental protection
Approvals (according to type)
Copper side view Copper side view Copper side view
input output input output
* Note: all technical data relates to using the relay directly on PCB or PCB socket type 93.11.
If the relay is used with 35 mm rail socket type 93.51, refer to the technical data of 38 Series; if used with types 93.60, 93.61, 93.62, 93.63,
93.64, 93.65, 93.66, 93.67,93.68 and 93.69, refer to the technical data of the MasterINTERFACE 39 Series.
2 A, 24 V DC output
switching
PCB or 93 series sockets
0.1 A, 48 V DC output
switching
PCB or 93 series sockets
2 A, 240 V AC output switching
Zero crossing switching
PCB or 93 series sockets
Features
Ultra-slim - Solid State Relays
Printed circuit mount
- direct or via PCB socket
35 mm rail mount
- via screw, screwless or push-in terminal sockets
Single circuit output switching options
- 2 A 24 V DC
- 0.1 A 48 V DC
- 2 A 240 V AC
Silent, high speed switching with long
electrical life
Ultra slim, 5 mm, package
Sensitive DC Input circuits (Dual AC/DC
input drive possible using 93 series sockets)
UL Listing (certain relay/socket combinations)
Wash tight: RT III
2,500 V insulation, input-output
input output
1 NO (SPST-NO) 1 NO (SPST-NO) 1 NO (SPST-NO)
2/20 0.1/0.5 2/40
(24/33)DC (48/60)DC (240/—)AC
(1.5...24)DC (1.5...48)DC (12...275)AC
600
1 0.05 22
0.001 0.001 1.5
0.12 1 1.6
5 12 24 60 24 60 5 12 24 60
0.035 0.087 0.17 0.18 0.17 0.18 0.060 0.087 0.17 0.18
3.5...12 8...17
16...30
35...72
16...30 35...72
3.5...10 8...17
16...30
35...72
7 7.2 7 3 7 3 12 7.2 7 3
1 4 10 20 10 20 1 4 10 20
715 1,940 3,200 21,300 3,200 21,300 416 1,940 3,200
21,300
0.1/0.6* 0.04/0.6* 12/12*
2,500 2,500 2,500
–20...+60 –20...+60 –20...+60
RT III RT III RT III
I-2015, www.findernet.com
For outline drawing see page 5
34
SERIE S 34 Series - Slim solid state PCB relays (SSR) 0.1 - 2 A
A
14
11
12
A1
A2
Example: 34 series slim electromechanical relay, 1 CO (SPDT) 6 A contacts, 24 V sensitive DC coil.
Example: 34 series SSR relay, 2 A output, 24 V DC supply.
A: Contact material
0 = Standard AgNi
4 = AgSnO2
5 = AgNi + Au
B: Contact circuit
0 = CO (SPDT)
3 = NO (SPST)
Series
Type
5 = Electromechanical type
No. of poles
1 = 1 pole, 6 A
Coil version
7 = Sensitive DC
Coil voltage
See coil specifications
5 1 0 7
D: Special versions
0 = Flux proof (RT II)
9 = Flat version
C: Options
1 = None
Ordering information
Electromechanical relay (EMR)
Solid state relay (SSR)
A B C D
... .
0 2 4 3 4
Output circuit
9024 = 2 A - 24 V DC
7048 = 0.1 A - 48 V DC
8240 = 2 A - 240 V AC
Series
Type
8 = SSR type
Output
1 = 1 NO (SPST-NO)
Input circuit
See input specifications
8 1 7
... .
0 2 4 9 0 2 4
3 4
Option =34.51.7xxx.x019
Environmental protection RT I
Copper side view
0 1 0
3
Type Coil version A B C D
34.51 sens. DC 0- 4 - 5 0- 3 1 0
34.51 sens. DC 0 - 4 - 5 0 1 9
Selecting features and options: only combinations in the same row are possible.
Preferred selections for best availability are shown in bold.
Flat pack version
I-2015, www.findernet.com
34 Series - Ultra-Slim PCB relays 34
SERIES
A
Technical data
Nominal Coil Operating range Resistance Rated coil
voltage code
consumption
UN Umin Umax R I at UN
V V V Ω mA
5 7.005 3.5 7.5 130 38.4
12 7.012 8.4 18 840 14.2
24 7.024 16.8 36 3,350 7.1
48 7.048 33.6 72 12,300 3.9
60 7.060 42 90 19,700 3
DC coil data
Coil specifications
When switching a resistive load (DC1) having voltage and current
values under the curve, an electrical life of 60·103can be expected.
In the case of DC13 loads, the connection of a diode in parallel with
the load will permit a similar electrical life as for a DC1 load.
Note: the release time for the load will be increased.
Electromechanical relay
4
Contact specification
F 34 - Electrical life (AC) v contact current
Cycles
DC voltage (V)
DC breaking current (A)
H 34 - Maximum DC1 breaking capacity
1- Max. permitted coil voltage.
2- Min. pick-up voltage with coil at ambient temperature.
R 34 - DC coil operating range v ambient temperature
Insulation according to EN 61810-1
Nominal voltage of supply system V AC 230/400
Rated insulation voltage V AC 250 400
Pollution degree 3 2
Insulation between coil and contact set
Type of insulation Reinforced
Overvoltage category III
Rated impulse voltage kV (1.2/50 μs) 6
Dielectric strength V AC 4,000
Insulation between open contacts
Type of disconnection Micro-disconnection
Dielectric strength V AC/kV (1.2/50 μs) 1,000/1.5
Conducted disturbance immunity
Burst (5...50)ns, 5 kHz, on A1 - A2 EN 61000-4-4 level 4 (4 kV)
Surge (1.2/50 μs) on A1 - A2 (differential mode) EN 61000-4-5 level 3 (2 kV)
Other data
Bounce time: NO/NC ms 1/6
Vibration resistance (5…55)Hz: NO/NC g 10/5
Shock resistance g 20/14
Power lost to the environment without contact current W 0.2
with rated current W 0.5
Recommended distance between relays mounted on PCB mm 5
Resistive load - cosϕ= 1
Inductive load - cosϕ= 0.4
I-2015, www.findernet.com
34
SERIE S 34 Series - Ultra-Slim PCB relays
A
5
Solid state relay
Nominal Input Operating range Release Impedance Control
voltage code voltage current
UN Umin Umax I at UN
V V V V Ω mA
5 7.005 3.5 12 (10*) 1
715 (416*)
7 (12*)
12 7.012 8 17 4 1,940 7.2
24 7.024 16 30 10 3,200 7
60 7.060 35 72 20 21,300 3
Input data - DC types
Input specification
Output specification
Output current
EMC specifications Reference standard
Electrostatic discharge contact discharge EN 61000-4-2 4 kV
air discharge EN 61000-4-2 8 kV
Fast transients on supply terminals
(burst 5/50 ns, 5 kHz) EN 61000-4-4 2 kV
Voltage pulses on supply common mode EN 61000-4-5 0.5 kV
terminals (surge 1.2/50 μs) differential mode EN 61000-4-5 0.5 kV
Other data
Power lost to the environment without output current W 0.17
with rated current W 0.4
Technical data
Output current
L 34 - Output current v ambient temperature
SSR - 2 A DC & AC output types
L 34 - Output current v ambient temperature
SSR - 0.1 A DC output types
* AC Output version.
I-2015, www.findernet.com
Outline drawings
Type 34.51 Type 34.81
34 Series - Ultra-Slim PCB relays 34
SERIES
A
93.61
6
93.62
93.63
93.64
93.68
Screw terminal socket 35mm rail mounting (EN 60715)
Common features
- Space saving 6.2 mm wide
- Connections for 16-way jumper link
- Integral coil indication and protection circuit
- Secure retention and easy ejection by plastic clip
- Dual screw head (blade+cross) terminals
For technical data and supply versions, refer to the MasterINTERFACE 39 Series – “Relay interface module”
Electromechanical Relay - EMR
Solid State Relay - SSR
Socket type (reference with the 39 Series)
Supply voltage Relay type MasterBASIC MasterPLUS MasterINPUT MasterOUTPUT MasterTIMER
(39.11…..) (39.31…..) (39.41…..) (39.21…..) (39.81…..)
6 V AC/DC 34.51.7.005.xx10 93.61.7.024 93.63.7.024 93.64.7.024 93.62.7.024
12 V AC/DC 34.51.7.012.xx10 93.61.7.024 93.63.7.024 93.64.7.024 93.62.7.024 93.68.0.024
24 V AC/DC 34.51.7.024.xx10 93.61.7.024 93.63.7.024 93.64.7.024 93.62.7.024 93.68.0.024
60 V AC/DC 34.51.7.060.xx10 93.63.7.060
(110…125)V AC/DC*
34.51.7.060.xx10 93.63.3.125
(220…240)V AC* 34.51.7.060.xx10 93.63.3.230
(110…125)V AC/DC
34.51.7.060.xx10 93.61.0.125 93.63.0.125 93.64.0.125 93.62.0.125
(24...240)V AC/DC 34.51.7.024.xx10 93.63.0.240
(220…240)V AC 34.51.7.060.xx10 93.61.8.230 93.63.8.230 93.64.8.230 93.62.8.230
(110…125) V DC 34.51.7.060.xx10 93.63.7.125
220 V DC 34.51.7.060.xx10 93.63.7.220
* Leakage current suppression
Socket type (reference with the 39 Series)
Supply voltage Relay type MasterBASIC MasterPLUS MasterINPUT MasterOUTPUT MasterTIMER
(39.10…..) (39.30…..) (39.40…..) (39.20…..) (39.80…..)
12 V AC/DC 34.81.7.012.xxxx 93.68.0.024
24 V AC/DC 34.81.7.024.xxxx 93.63.0.024 93.64.0.024 93.68.0.024
(110…125)V AC/DC*
34.81.7.060.xxxx 93.63.3.125
(220…240)V AC* 34.81.7.060.xxxx 93.63.3.230
(110…125)V AC/DC 34.81.7.060.xxxx 93.61.0.125 93.63.0.125 93.64.0.125 93.62.0.125
(24...240)V AC/DC 34.81.7.024.xxxx 93.63.0.240
(220…240)V AC 34.81.7.060.xxxx 93.61.8.230 93.63.8.230 93.64.8.230 93.62.8.230
6 V DC 34.81.7.005.xxxx 93.61.7.024 93.63.7.024 93.64.7.024 93.62.7.024
12 V DC 34.81.7.012.xxxx 93.61.7.024 93.63.7.024 93.64.7.024 93.62.7.024
24 V DC 34.81.7.024.xxxx 93.61.7.024 93.63.7.024 93.64.7.024 93.62.7.024
60 V DC 34.81.7.060.xxxx 93.63.7.060
(110…125) V DC 34.81.7.060.xxxx 93.63.7.125
220 V DC 34.81.7.060.xxxx 93.63.7.220
* Leakage current suppression
Accessories
16-way jumper link 093.16 (blue), 093.16.0 (black), 093.16.1 (red)
Dual-purpose plastic separator 093.60
Sheet of marker tags 060.72
Technical data
Rated values 6 A – 250 V
Dielectric strength 6 kV (1.2/50 μs) between coil and contacts
Protection category IP20
Ambient temperature °C −40…+70
Screw torque Nm 0.5
Wire strip length mm 10
Max wire size Solid wire and stranded wire
mm2 1 x (0.2...2.5) / 2 x 1.5
AWG 1 x (24...14) / 2 x 16
Approvals
(according to type):
I-2015, www.findernet.com
34
SERIE S 93 Series - Sockets and accessories for 34 series relays
A
Push-In terminal socket 35mm rail mounting (EN 60715)
Common features
- Space saving 6.2 mm wide
- Connections for 16-way jumper link
- Terminal doubler 093.62
- Integral coil indication and protection circuit
- Secure retention and easy ejection by plastic clip
For technical data and supply versions, refer to the MasterINTERFACE 39 Series – “Relay interface module”
Electromechanical Relay - EMR
Solid State Relay - SSR
Socket type (reference with the 39 Series)
Supply voltage Relay type MasterBASIC MasterPLUS MasterINPUT MasterOUTPUT MasterTIMER
(39.01…..) (39.61…..) (39.71…..) (39.51…..) (39.91…..)
6 V AC/DC 34.51.7.005.xx10 93.60.7.024 93.66.7.024 93.67.7.024 93.65.7.024
12 V AC/DC 34.51.7.012.xx10 93.60.7.024 93.66.7.024 93.67.7.024 93.65.7.024 93.69.0.024
24 V AC/DC 34.51.7.024.xx10 93.60.7.024 93.66.7.024 93.67.7.024 93.65.7.024 93.69.0.024
60 V AC/DC 34.51.7.060.xx10 93.66.7.060
(110…125)V AC/DC*
34.51.7.060.xx10 93.66.3.125
(220…240)V AC* 34.51.7.060.xx10 93.66.3.230
(110…125)V AC/DC
34.51.7.060.xx10 93.60.0.125 93.66.0.125 93.67.0.125 93.65.0.125
(24...240)V AC/DC 34.51.7.024.xx10 93.66.0.240
(220…240)V AC 34.51.7.060.xx10 93.60.8.230 93.66.8.230 93.67.8.230 93.65.8.230
(110…125) V DC 34.51.7.060.xx10 93.66.7.125
220 V DC 34.51.7.060.xx10 93.66.7.220
* Leakage current suppression
Socket type (reference with the 39 Series)
Supply voltage Relay type MasterBASIC MasterPLUS MasterINPUT MasterOUTPUT MasterTIMER
(39.00…..) (39.60…..) (39.70…..) (39.50…..) (39.90…..)
12 V AC/DC 34.81.7.012.xxxx 93.69.0.024
24 V AC/DC 34.81.7.024.xxxx 93.66.0.024 93.67.0.024 93.69.0.024
(110…125)V AC/DC*
34.81.7.060.xxxx 93.66.3.125
(220…240)V AC* 34.81.7.060.xxxx 93.66.3.230
(110…125)V AC/DC 34.81.7.060.xxxx 93.60.0.125 93.66.0.125 93.67.0.125 93.65.0.125
(24...240)V AC/DC 34.81.7.024.xxxx 93.66.0.240
(220…240)V AC 34.81.7.060.xxxx 93.60.8.230 93.66.8.230 93.67.8.230 93.65.8.230
6 V DC 34.81.7.005.xxxx 93.60.7.024 93.66.7.024 93.67.7.024 93.65.7.024
12 V DC 34.81.7.012.xxxx 93.60.7.024 93.66.7.024 93.67.7.024 93.65.7.024
24 V DC 34.81.7.024.xxxx 93.60.7.024 93.66.7.024 93.67.7.024 93.65.7.024
60 V DC 34.81.7.060.xxxx 93.66.7.060
(110…125) V DC 34.81.7.060.xxxx 93.66.7.125
220 V DC 34.81.7.060.xxxx 93.66.7.220
* Leakage current suppression
Accessories
16-way jumper link 093.16 (blue), 093.16.0 (black), 093.16.1 (red)
Dual-purpose plastic separator 093.60
Terminal doubler 093.62
Sheet of marker tags 060.72
Technical data
Rated values 6 A – 250 V
Dielectric strength 6 kV (1.2/50 μs) between coil and contacts
Protection category IP20
Ambient temperature °C −40…+70
Wire strip length mm 8
Max wire size Solid wire and stranded wire
mm2 1 x (0.2...2.5)
AWG 1 x (24...14)
7
I-2015, www.findernet.com
Approvals
(according to type):
93.60
93.66
93.67
93.65
93.69
93 Series - Sockets and accessories for 34 series relays 34
SERIES
A
8
I-2015, www.findernet.com
Screw less terminal socket 35mm rail mounting (EN 60715)
Common features
- Space saving 6.2 mm wide
- Connections for 20-way jumper link
- Integral coil indication and protection circuit
- Secure retention and easy ejection by plastic clip
For technical data and supply versions, refer to the 38 Series – “Relay interface module”
Electromechanical Relay - EMR and Solid State Relay - SSR
Relay type (reference with the 38 Series)
Supply voltage Electromechnanical relay - EMR Solid State Relay - SSR Socket type
(38.61…..) (38.81…..)
12 V AC/DC 34.51.7.012.xx10 93.51.0.024
24 V AC/DC 34.51.7.024.xx10 93.51.0.024
(110…125)V AC/DC 34.51.7.060.xx10 34.81.7.060.xxxx 93.51.0.125
(220…240)V AC/DC 34.51.7.060.xx10 34.81.7.060.xxxx 93.51.0.240
(110…125)V AC/DC * 34.51.7.060.xx10 34.81.7.060.xxxx 93.51.3.125
(220…240)V AC * 34.51.7.060.xx10 34.81.7.060.xxxx 93.51.3.240
(220…240)V AC 34.51.7.060.xx10 34.81.7.060.xxxx 93.51.8.240
12 V DC 34.51.7.012.xx10 34.81.7.012.xxxx 93.51.7.024
24 V DC 34.51.7.024.xx10 34.81.7.024.xxxx 93.51.7.024
60 V DC 34.51.7.060.xx10 34.81.7.060.xxxx 93.51.7.060
* Leakage current suppression
Accessories
20-way jumper link 093.20
Plastic separator 093.01
Sheet of marker tags 093.64
Technical data
Rated values 6 A – 250 V
Dielectric strength 6 kV (1.2/50 μs) between coil and contacts
Protection category IP20
Ambient temperature (UN≤ 60 V/> 60 V) °C −40...+70/−40...+55
Wire strip length mm 10
Max wire size Solid wire and stranded wire
mm2 1 x 2.5 / 2 x 1.5
AWG 1 x 14 / 2 x 16
93.51
Approvals
(according to type):
Certain relay/socket
combinations
34
SERIE S 93 Series - Sockets and accessories for 34 series relays
A
Approvals
(according to type):
Copper side view
Retaining and release clip use:
PCB socket with retaining and release clip 93.11 (blue)
For relay type 34.51, 34.81
Technical data
Rated values 6 A - 250 V
Dielectric strength 6 kV (1.2/50 μs) between coil and contacts
Protection category IP 20
Ambient temperature °C –40…+70
(+) (A)
93.11
I-2015, www.findernet.com
9
93 Series - Sockets and accessories for 34 series relays 34
SERIES
A