Model No：
：：
：PA-1061-0
Part No：
：：
：PA-1061-02IL-LF
Description：
：：
：12V 60W AC Adaptor
Revision：
：：
：A
Issued Date：
：：
：Oct. 30, 2012
光寶科技
光寶科技光寶科技
光寶科技股份有限公司
股份有限公司股份有限公司
股份有限公司
LITE-ON TECHNOLOGY CORP.
桃園縣大園鄉三石村三和路 3巷7號（力信工業大樓）
7,Lane 3,San Ho Rd,San-Shin Village,Da-Yuan Hsiang,Taoyuan Hsien 337,Taiwan, R.O.C.
Approved By Checked By Prepared By
X
規 格 書
Electrical Specification
Product model：PA-1061-02IL-LF
Page： 2 Revision：A Date: Jul. 30, 2012
Change Record
DCN No REV
Revision Description Date
00 Modified form PA-1061-01LT-LF Jul. 17, 2012
X01
1. 2.8 Safety: Hi-pot test from 1800Vac to 1850Vac
2. 4.1 EMS surge from 6KV(DM)/6KV(CM) to
1KV(DM)/2KV(CM)
3. 6.4 Weight from 450g to 320
±
15g.
Jul. 18, 2012
X02
1. 6.3 DC cord: From 1500mm change to 1050mm Oct. 24, 2012
A Release to factory Oct. 30, 2012
Product model：PA-1061-02IL-LF
Page： 3 Revision：A Date: Jul. 30, 2012
Contents
1. Description ........................................................................................................ 4
2. Electrical ............................................................................................................ 4
2.1 Input Voltage ......................................................................................... 4
2.2 Input Frequency .................................................................................... 4
2.3 Input Current ......................................................................................... 4
2.4 Inrush Current ....................................................................................... 4
2.5 Hold-Up time ......................................................................................... 4
2.6 Input wattage ......................................................................................... 4
2.7 Efficiency ............................................................................................... 4
2.8 Safety Test ............................................................................................ 4
2.9 Output Voltage and Current................................................................... 4
2.10 Ripple and Noise ................................................................................... 5
2.11 Over-Shoot and under-shoot ................................................................. 5
2.12 Protection .............................................................................................. 5
2.13 LED Indication ....................................................................................... 5
2.14 Rise time ............................................................................................... 5
2.15 Turn on delay time................................................................................. 5
2.16 Temperature Coeffience ........................................................................ 5
2.17 Transient Response .............................................................................. 5
3. Environment ...................................................................................................... 6
3.1 Temperature .......................................................................................... 6
3.2 Humidity ................................................................................................ 6
3.3 Altitude .................................................................................................. 6
4. EMC .................................................................................................................. 6
4.1 EMS ...................................................................................................... 6
4.2 EMI ........................................................................................................ 6
5. Reliability ........................................................................................................... 7
5.1 Life (E-cap.)........................................................................................... 7
5.2 M.T.B.F. ................................................................................................. 7
5.3 Temperature Rise. ................................................................................. 7
5.4 Burn-in .................................................................................................. 7
5.5 Vibration Test ........................................................................................ 7
5.6 Drop-Test............................................................................................... 7
6. Mechanical ........................................................................................................ 7
Product model：PA-1061-02IL-LF
Page： 4 Revision：A Date: Jul. 30, 2012
1. Description
This product is a AC to DC power transfer device, it can provide for a 60W single dc
output with constant voltage source.
2. Electrical
2.1 Input Voltage
a. 100 - 240Vac Nominal.
b. 90 - 264Vac Universal.
2.2 Input Frequency
47- 63Hz.
2.3 Input Current
1.5A max. at 90Vac input & dc output full-loading.
2.4 Inrush Current
Inrush peak current and Joule integral will be measure at different line voltage at
high ambient temperature. Peak current is within specified limit and Joule integral
well below fuse and bridge spec.
2.5 Hold-Up time
10msec min. at dc output full-loading and 115Vac input.
2.6 Input wattage
Less than 0.3W at 230Vac input & no load condition.
2.7 Efficiency
Average efficiency 87% minimum min. at 25%, 50%, 75% & 100% of full-loading and
115/230Vac input (After warm up 20 minutes).
2.8 Safety Test
a. Leakage current less than 0.25 mA at 254Vac, 50Hz.
b. Hi-Pot test : 1850 Vac, 10mA, 1 – 3 Sec. between Primary to Secondary ground.
c. Insulation resistance: at dc 500Vdc, 1 Sec. between Primary to Secondary circuit,
IR shall >=20MΩ.
d. Grounding test : AC 30A , 2 Sec. between input safety ground and SELV output
GND, GR ≦0.1Ω.
2.9 Output Voltage and Current
Vout (V) Range (V) Iout (min., A) Iout (max., A) Peak (10S, A)
12V 11.4 – 12.6 0 5 6
Product model：PA-1061-02IL-LF
Page： 5 Revision：A Date: Jul. 30, 2012
2.10 Ripple and Noise
Low frequency ripple ( < 100KHz ) <= 300mVpp, and Total composite Ripple and
Noise. Less than 300mVp-p, tested by dc loading side parallel with a 10uF/EC. and
0.1uF/Ceramic. Capacitors and Measured Band Width 20MHz.
2.11 Over-Shoot and under-shoot
Less than 10% of nominal Voltage value.
2.12 Protection
a. SCP : Short circuit protection with auto. recovery function.
b. OVP : Over voltage protection with shut down & latch off function.
Tripped voltage will be less than 18Vdc.
c. OCP : Over current protection with auto. recovery function,
current limit : 9 A (max.)
d. OTP: The adapter shall provide over temperature protection and if the
temperature rises to set temperature point, the PSU shall be latch-off.
2.13 LED Indication
Green light for Nominal operation. Blank or Flash for SCP mode.
2.14 Rise time
Rise time shall be less than 50msec., it should be measured from 10% to 90%
of the output voltage.
2.15 Turn on delay time
The output voltage should turn on from AC on to settle within regulation in less than
3.0sec.
2.16 Temperature Coeffience
Less than 0.2%/C
2.17 Transient Response
Dynamic loading condition.
DC output (V)
I1 ( A )
I2 ( A )
dVmax.(V)
Time-max.
dI/dT
12.0 0.0 1.7 +/- 1.0 10 msec.
>=50mA/usec.
12.0 1.7 3.4 +/- 1.0 10 msec.
>=50mA/usec.
12.0 3.4 5.0 +/- 1.0 10 msec.
>=50mA/usec.
50% of duty cycle.
Product model：PA-1061-02IL-LF
Page： 6 Revision：A Date: Jul. 30, 2012
3. Environment
3.1 Temperature
a. Operation : 0 to 40 ℃
℃℃
℃
b. Storage : -40 to 70 ℃
3.2 Humidity
a. Operation : 20 to 80%
b. Storage : 10 to 90%
3.3 Altitude
From sea level to 2000m (operation).
4. EMC
4.1 EMS
Test Item
Test Specification
IEC Standards
ESD Contact +/- 8KV
61000-4-2
ESD Air +/- 15KV
61000-4-2
RS FR: 26MHz-1.0GHz,
Field Strength: 3V/M 61000-4-3
EFT +/- 1KV (DM) & +/- 2KV (CM) 61000-4-4
SURGE +/- 1KV (DM) & +/- 2KV (CM) 61000-4-5
CS 3V/M 61000-4-6
DIPS 0% 250Cy, 40% 5 Cy, 70% 5Cy 61000-4-11
4.2 EMI
Standards Specification
FCC Part 15,class B
VCCI Class B
CISPR Part 22,class B
Product model：PA-1061-02IL-LF
Page： 7 Revision：A Date: Jul. 30, 2012
5. Reliability
5.1 Life (E-cap.)
12,000 hours (8 hours/day x 300 days/year x 5 years)
At DC output full-loading, AC 115/230 Vac input & ambient temperature 25℃.
5.2 M.T.B.F.
50,000 Power On Hours at 25℃.
5.3 Temperature Rise.
Less than 45℃
℃℃
℃ at nominal AC input / DC output full-loading and environment
temperature 25+/-1℃ on Top/Bottom of plastic case.
5.4 Burn-in
100% Burn-In with 80~100% full-loading & 35~45℃ Environment temperature.
5.5 Vibration Test
a. Non operation vibration with shipping container shall be 2G'S peak/7-50Hz, 4G'S
/50-500Hz, after test no abnormally to be found.
b. Operation vibration shall be 0.5G'S peak/10-60Hz, 3 AXES, after test no
abnormally to be noted.
5.6 Drop-Test
Test height is 100cm, after drop test no function abonormally to be noted.
6. Mechanical
6.1 Plastic enclosure：PC+ABS material.
6.2 Physical Size：120 mm( L ) * 60 mm ( W ) * 35 mm ( H ).
6.3 DC cord: 1050 mm, 16 wires.
6.4 Weight : 320±
±±
±15g.
