1
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
MIL-DTL-5015, Matrix®
TABLE OF CONTENTS FOR SECTION M
Design Characteristics, Customer Options ....................................2
Insert Availability and Identication ..........................................3, 4
Insert Arrangement Drawings ..............................................5-13
Class Descriptions, Performance Specications ................................14
Insert Alternate Positioning ................................................15
How to Order, Military and Commercial .......................................16
Shell Styles:
Wall mounting receptacle threaded MS3450 (9440) .............................17
Cable connecting receptacle threaded MS3451 (9441) ...........................18
Box mounting receptacle threaded MS3452 (9442) ..............................19
Jam nut receptacle threaded MS3454 (9444) ..................................20
Straight plug threaded MS3456 (9446) .......................................21
Straight plug, self-locking threaded MS3459 (9816) .............................22
Quick disconnect plug push-pull coupling (9817/9818) ...........................23
Matrix® 5015 with RADSOK® contacts, for high power ..........................24
Contact information, sealing plugs, tools .....................................25
Protection caps, dust caps ................................................26-28
Additional MIL-DTL-5015 connectors offered by Amphenol .......................29
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015
MATRIX
M
2
MS3450
WALL MOUNTING
RECEPTACLE
MS3451
CABLE CONNECTING
RECEPTACLE
MS3452
BOX MOUNTING
RECEPTACLE
MS3454
JAM NUT RECEPTACLE
MS3456
PLUG WITH
THREADEDCOUPLING
MS3459
PLUG WITH
SELF-LOCKING
COUPLING NUT
AMPHENOL BROADENS THEIR MS/STANDARD
FAMILY OF CONNEC TORS WITH THE MIL-DTL-5015
CRIMP REAR RELEASE SERIES
This series provides an improved alternative to the older
MIL-C-5015 solder type. It bridges the gap between an old
connector stan dard and the environmental and high perfor-
mance needs of current technologies.
DESIGN CHARACTERISTICS
• Medium to heavy weight enviornmental cylindrical
• MS345( ) series intermateable with existing MIL-DTL-5015
solder or crimp versions on existing equipment
• Captive coupling nut mechanism, utilizes retaining rings
in combination with “L” washers to prevent inadvertent
disas sembly
• Multiple interlock systems ensure permanent
insert reten tion
• Positive control of dielectric separation with guaranteed
ease of contact insertion
• Positive contact retention provided by a closely toleranced
damage-proof metal retention clip
• Completely sealed against environmental extremes with -
• Individual contact seals (conical risers on pin interface)
• Interfacial seals between contacts
• Peripheral gasket shell-to-shell seals
• Redundant rear wire seals and insert-to-shell seals
CUSTOMER OPTIONS
• Seven mounting styles, in shell sizes 8 to 40
• Threaded coupling or self-locking plug (MS3459) with an internal
ratcheting mechanism to prevent unmating due to vibration and
shock, eliminating the need for safety wiring
• Proprietary quick disconnect plug, with or without
lanyard available
• Classes include aluminum or stainless steel shells,
or rewall capability
• Mil-Spec and custom proprietary versions available
• Some styles are supplied to McDonnell Douglas
Specica tion BAN 7025, DC60 Series
• Accommodation of contact sizes 0 to 16
• Over 100 insert arrangement patterns available,
accom modating from a minimum of 1 to a maximum
of 85 circuits
• Alternate positioning available
• High power RADSOK socket contacts available
NOTE: MIL-C-5015 is superseded to MIL-DTL-5015 for all
Amphenol/Matrix rear release crimp type contacts.
MIL-DTL-5015 with Crimp Rear Release Contacts
COMMERCIAL QUICK
DISCONNECT PLUG
WITH/WITHOUT
LANYARD
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015 MATRIX
M
3
Amphenol Matrix 5015 Connector
With RADSOK® Contacts
FOR HIGH POWER APPLICATIONS
• Completely environmentally sealed with contact seals,
gaskets, wire seals and insert-to-shell seals
• Special design enhanced with RADSOK contacts in the plug or
receptacle instead of standard rear release crimp contacts
• All the shell styles and nishes of the Matrix 5015 family are
available, including rewall styles and non-decoupling style
• Recommended for applications up to 150° operating temperature
• Up to 40% increased current carrying capability
• RADSOK contacts provide high amperage capability with minimal
voltage loss and low insertion forces
• The RADSOK contact has a hyperbolic, stamped grid conguration
with the socket circular. As a male pin is inserted, axial members in the
female socket deect, enabling high current ow across the connection
with minimal voltage loss RADSOK
AMPHENOL’S DURMALONTM
Durmalon, like Olive-Drab Cadmium plating (Class W),
meets 500 hours of dynamic salt spray, combined with 500
mating cycles and meets specied millivolt drop shell-to-
shell conductivity. Durmalon also meets a 200° C tempera-
ture rating. Durmalon has been proven to meet this
requirement as well as Potassium Formate-Deicer uid
testing performed by Boeing.
BLACK ZINC NICKEL IS AMPHENOL’S 2ND
RoHS COMPLIANT PLATING
ALTERNATIVE TO CADMIUM
Amphenol is now offering a new RoHS compliant alternative
to Cadmium. Black Zinc Nickel is a non-reective and
conductive black nish approved for 500 hrs salt spray
making it an excellent choice for harsh environments. Black
Zinc Nickel has been qualied by the DLA. Black Zinc Nickel
is compatible with other platings and available on a wide
variety of accessories.
Standard
Contacts RADSOK Contacts
Size Amps Size Amps Cartridge size
8 46 8 70 3.6 MM
4 80 4 120 5.7MM
0 150 0 250 9.1MM
NEW RoHS FINISHES
BLACK ZINC NICKLE FINISH
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015
MATRIX
M
4
Insert Availability and Identification
Insert
Arrangement
Service
Rating
Total
Contacts
Contact Size
0 4 8 12 16
8S-1 A 1 1
10S-2 A 1 1
10SL-3 A 3 3
10SL-4 A 2 2
12S-1 A 2 2
12S-2 A 2 2
12S-3 A 2 2
12S-4 D 1 1
12-5 D 1 1
14S-2 Inst. 4 4
14-3 A 1 1
14S-5 Inst. 5 5
14S-6 Inst. 6 6
14S-7 A 3 3
14S-9** A 2 2
14S-10 Inst. 4 4
14S-11 Inst. 4 4
14S-12 A 3 3
14S-13 A 3 3
16S-1 A 7 7
16-2* E 1 1
16S-8 A 5 5
16-9 A 4 2 2
16-10 A 3 3
16-11 A 2 2
16-12 A 1 1
16-13 A 2 2
18-1 A/Inst. 10 10
18-4 D 4 4
18-5 • D 3 2 1
18-6* D 1 1
18-8 A 8 1 7
18-9 Inst. 7 2 5
18-10** A 4 4
18-11 A 5 5
18-12 A 6 6
18-13 A 4 1 3
18-15 A 4 4
18-17 Inst. 7 2 5
18-18 Inst. 7 2 5
18-19** A 10 10
18-22** D 3 3
18-23 A/Inst. 10 10
Insert
Arrangement
Service
Rating
Total
Contacts
Contact Size
0 4 8 12 16
18-24 A/Inst. 10 10
18-27• D 3 2 1
18-28• D 3 2 1
20-2 D 1 1
20-4 D 4 4
20-7 D/A 8 8
20-8 Inst. 6 2 4
20-14 A 5 2 3
20-15 A 7 7
20-16 A 9 2 7
20-17 A 6 5 1
20-18 A 9 3 6
20-19 A 3 3
20-21 A 9 1 8
20-22 A 6 3 3
20-24 A 4 2 2
20-27 A 14 14
20-29 A 17 17
20-32 D/A 8 8
20-33 A 11 11
22-2 D 3 3
22-5 D 6 2 4
22-6* D 3 2 1
22-7* E 1 1
22-10* E 4 4
22-11* B 2 2
22-14 A 19 19
22-19 A 14 14
22-21 A 3 1 2
22-22 A 4 4
22-23 D/A 8 8
22-30 A 19 19
22-32 D 6 2 4
24-2 D 7 7
24-5** A 16 16
* Consult Amphenol Aerospace for availability
** Inactive for new design
• Socket Only
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015 MATRIX
M
5
Insert Availability and Identification
Insert
Arrangement
Service
Rating
Total
Contacts
Contact Size
0 4 8 12 16
24-7 A 16 2 14
24-10 A 7 7
24-11 A 9 3 6
24-12 A 5 2 3
24-15 A 16 16
24-20 D 11 2 9
24-22 D 4 4
24-24 A 16 16
24-28 Inst. 24 24
28-1 D/A 9 3 6
28-2 D 14 2 12
28-9 D 12 6 6
28-10 D/A 7 2 2 3
28-11 A 22 4 18
28-12 A 26 26
28-13 A 26 26
28-15 A 35 35
28-17 B/D/A 15 15
28-19* B/D/A 10 4 6
28-20 A 14 10 4
28-21 A 37 37
28-22 D 6 3 3
32-1 E/D 5 2 3
32-6 A 23 2 3 2 16
32-7 Inst./A 35 7 28
32-9 D 14 2 12
32-13 D 23 5 18
32-15 D 8 2 6
32-16 A 23 2 3 2 16
32-17 D 4 4
32-19 E/D 5 2 3
Insert
Arrangement
Service
Rating
Total
Contacts
Contact Size
0 4 8 12 16
32-63 D 5 5
32-73 A 46 46
36-3 D 6 3 3
36-5 A 4 4
36-6 A 6 2 4
36-7 A 47 7 40
36-8 A 47 1 46
36-9 A 31 1 2 14 14
36-10 A 48 48
36-11 A 48 48
36-12 A 48 48
36-15 D/A 35 35
36-16 A 47 7 40
36-17 A 47 7 40
36-18 A 31 1 2 14 14
36-21 A 31 1 2 14 14
36-52 A 52 52
40-1 D 30 6 24
40-9 A 47 1 22 24
40-56 A 85 85
* Consult Amphenol Aerospace for availability
** Inactive for new design
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015
MATRIX
M
6
BA
BA
A
BC
D
A
B
C
D
E
FA
B
C
D
E
AB
100˚
A
BC
D
100˚
A
B
C
A
B
CD
E
F
G
A
B
C
D
E
100° Rotation
of 12S-3
250° Rotation
of 12S-3
100° Rotation
of 14S-2
250° Rotation
of 14S-2
100° Rotation
of 14S-1
260° Rotation
of 14S-1
C
BA
BA
100˚
BA
250˚
260˚
A
B
C
A
B
C
Insert Arrangement 8S-1 10S-2 10SL-3 10SL-4 12S-1 12S-2 12S-3
Service Rating A A A*** A A A A
Number of Contacts 1 1 3 2 2 2 2
Contact Size 16 16 16 16 16 16 16
Insert Arrangement 12S-4 12-5 14S-2 14-3 14S-5 14S-6
Service Rating D D Inst. A Inst. Inst.
Number of Contacts 1 1 4 1 5 6
Contact Size 16 12 16 8 16 16
Insert Arrangement 14S-7 14S-9** 14S-10 14S-11 14S-12 14S-13
Service Rating A A Inst. Inst. A A
Number of Contacts 3 2 4 4 3 3
Contact Size 16 16 16 16 16 16
Insert Arrangement 16S-1 16-2* 16S-8 16-9 16-10 16-11
Service Rating A E A A A A
Number of Contacts 7 1 5 2 2 3 2
Contact Size 16 12 16 12 16 12 12
Front Face of Pin Insert or Rear Face of Socket Insert Illustrated
* Consult Amphenol Aerospace for availability.
** Inactive for new design
*** Service rating Inst. Class K
• Socket only
† One Iron contact and one Constantan contact
AB
A
B
C
D
E
F
G
H
I
J
Insert Arrangement 16-12 16-13 18-1 18-4 18-5 • 18-6*
Service Rating A A B, C, F, G = A;
Bal. = Inst.
D D D
Number of Contacts 1 2† 10 4 2 1 1
Contact Size 4 12 16 16 12 16 4
Insert Arrangements
CONTACT LEGEND 16 12 8 4 0
A
B
C
D
B
CA
A
B
A
BC
D
A
BC
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015 MATRIX
M
7
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
A
B
C
D
100˚
A
B
C
D
E
F
G
A
BC
DEF G
H
K
J
AB
C
* Consult Amphenol Aerospace for availability.
** Inactive for new design
• Socket only
†† A, C = Iron; B, D = Constantan
100° Rotation
of 18-9
250° Rotation
of 18-9
100° Rotation
of 18-1
A
B
C
D
E
F
G
H
I
J
100˚
250˚
A
B
C
D
E
F
G
Insert Arrangement 18-8* 18-9 18-10** 18-11 18-12 18-13
Service Rating A Inst. A A A A
Number of Contacts 1 7 2 5 4 5 6 1 3
Contact Size 12 16 12 16 12 12 16 8 12
Insert Arrangement 18-15 18-17 18-18 18-19** 18-22** 18-23
Service Rating A Inst. Inst. A D B, C, F, G = A;
Bal. = Inst.
Number of Contacts 4†† 2 5 2 5 10 3 10
Contact Size 12 12 16 12 16 16 16 16
Front Face of Pin Insert or Rear Face of Socket Insert Illustrated
250˚
A
B
C
D
E
F
G
H
I
J
A
B
D
C
A
B
C
DE
F
G
H
250° Rotation
of 18-1
100° Rotation
of 18-5
250° Rotation
of 18-5
A
BC
100˚
A
BC
250˚
Insert Arrangement 18-24 18-27 • 18-28 • 20-2 20-4 20-7
Service Rating B, C, F, G = A; Bal. = Inst. D D D D A, B, G, H = D
C, D, E, F = A
Number of Contacts 10 2 1 2 1 1 4 8
Contact Size 16 12 16 12 16 0 12 16
Insert Arrangements
CONTACT LEGEND 16 12 8 4 0
A
BC
D
A
BC
D
E
A
B
C
D
E
F
A
B
C
D
A
B
C
D
EF
A
B
C
D
E
A
B
CD
EG
F
A
B
C
D
EFG
H
I
A
BC
D
E
F
Insert Arrangement 20-8* 20-14 20-15 20-16 20-17 20-18
Service Rating Inst. A A A A A
Number of Contacts 2 4 2 3 7 2 7 5 1 3 6
Contact Size 8 16 8 12 12 12 16 12 16 12 16
A
B
C
D
E
F
G
H
I
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015
MATRIX
M
8
A
BC
A
B
C
D
E
F
G
H
I
A
B
C
D
E
F
A
B
C
D
A
B
C
D
EF
G
H
I
J
K
L
M
N
*Consult Amphenol Aerospace for availability.
** Inactive for new design
Insert Arrangement 20-19 20-21 20-22 20-24 20-27 20-29
Service Rating A A A A A A
Number of Contacts 3 1 8 3 3 2 2 14 17
Contact Size 8 12 16 8 16 8 16 16 16
Front Face of Pin Insert or Rear Face of Socket Insert Illustrated
AB
C
D
E
F
G
H
J
K
L
MN
PT
SR
A
B
C
D
E
F
K
H
JM
L
A
BC
A
B
CD
E
F
260° Rotation of 20-7
A
B
C
DE
F
G
H
260˚
Insert Arrangement 20-32 20-33 22-2 22-5 22-6** 22-7*
Service Rating A, B, G, H = D; Bal. = A A D D D E
Number of Contacts 8 11 3 2 4 2 1 1
Contact Size 16 16 8 12 16 8 16 0
A
BC
D
AB
Insert Arrangement 22-10* 22-11* 22-14 22-19 22-21 22-22
Service Rating E B A A A A
Number of Contacts 4 2 19 14 1 2 4
Contact Size 16 16 16 16 0 16 8
Insert Arrangements
CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
F
G
H
J
K
LM
NU
V
R
S
TP
A
B
C
D
E
F
G
H
J
KL
M
N
P
A
B
C
A
BC
D
A
B
C
D
E
F
G
H
260° Rotation
of 22-5
A
B
C
D
E
F
G
H
J
K
LM
N
U
V
R
S
TP
260˚
A
B
CD
E
F
260˚
260° Rotation
of 22-14
A
B
C
A
B
C
D
E
F
G
H
260° Rotation
of 22-5
A
B
C
D
E
F
G
H
J
K
LM
N
U
V
R
S
TP
260˚
A
B
CD
E
F
260˚
Insert Arrangement 22-23 22-30 22-32 22-23 22-30 22-32
Service Rating H = D; Bal. = A A D H = D; Bal. = A A D
Number of Contacts 8 19 2 4 8 19 2 4
Contact Size 12 16 12 16 12 16 12 16
260° Rotation
of 22-14
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015 MATRIX
M
9
*Consult Amphenol Aerospace for availability.
** Inactive for new design
Front Face of Pin Insert or Rear Face of Socket Insert Illustrated
A
B
C
D
E
F
G
AB
C
DE
FGH
JK
LMN
P
S
R
AB
C
D
E
F
G
H
J
K
L
M
N
P
IO
Insert Arrangement 24-2 24-5** 24-7 24-10 24-11 24-12
Service Rating D A A A A A
Number of Contacts 7 16 2 14 7 3 6 2 3
Contact Size 12 16 12 16 8 8 12 4 12
Insert Arrangement 24-15 24-20 24-22 24-24 24-28 28-1
Service Rating A D D A Inst. A, J, E = D;
Bal. = A
Number of Contacts 16 1 9 4 16 24 2 7
Contact Size 16 8 16 8 16 16 12 6
AB
C
D
EF
G
H
J
KL
100° Rotation
of 24-5
AB
C
DE
FGH
JK
LMN
PS
R
100˚
Insert Arrangements
CONTACT LEGEND 16 12 8 4 0
A
B
CD
E
F
G
ABC
DEF
G
H
I
A
B
C
D
E
A
BC
D
ABCD
EFGH J
KL
M
NPQ
RST
U
V
WX YZ
AB
C
DE
FGH
JK
LMN
P
S
R
250˚
250° Rotation
of 24-5
AB
C
D
E
F
G
H
J
A
B
C
D
EF
G
H
J
K
L
M
N
P
AB
CD
P
S
EFG
Insert Arrangement 28-2 28-4* 28-9 28-10 28-11
Service Rating D G, P, S = E; Bal. = D D G = D, Bal. = A A
Number of Contacts 2 12 2 7 6 6 2 2 3 4 18
Contact Size 12 16 12 16 12 16 4 8 12 12 16
A
B
C
DE
F
G
H
J
K
LM
A
B
CD
E
F
G
A
B
C
D
E
F
G
H
J
K
L
M
I
N
P
R
S
T
U
V
W
X
A
B
C
D
E
F
G
H
J
K
L
M
PR
N
S
T
U
V
W
X
Y
Z
a
b
d
100˚
A
B
C
D
E
F
G
H
J
K
L
M
PR
N
S
T
U
V
W
X
Y
Z
a
b
d
AB
CDEFG
HJKLM
PRS T
N
W
XYZ
UV
abc
d
e
f
g
h
jk
m
l
A
B
CD
E
F
G
HJK
L
M
N
P
R
100° Rotation
of 28-12
Insert Arrangement 28-12 28-13 28-15 28-17 28-19*
Service Rating A A A R = B; M, N, P = D;
Bal. = A
H, M = B; A, B = D;
Bal. = A
Number of Contacts 26 26 35 15 4 6
Contact Size 16 16 16 16 12 16
AB
C
E
G
H
J
K
L
M
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015
MATRIX
M
10
A
B
C
D
E
F
G
H
J
K
L
M
N
P
A
BC
D
EFGHJ
KLMNPR
STUVWXZ
abcdef
ghjkm
nprs
Insert Arrangement 28-20 28-21 28-22 32-1 32-6
Service Rating A A D A = E; B, C, D, E = D A
Number of Contacts 10 4 37 3 3 2 3 2 3 2 16
Contact Size 12 16 16 4 16 0 12 4 8 12 16
Front Face of Pin Insert or Rear Face of Socket Insert Illustrated
A
B
C
DE
F
A
B
CD
E
AB
CD
EF
GH
J
KLMN
O
PR
S
T
UV
W
I
X
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
g
h
j
k
AB
CD EFG
HI JK
LMN
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
A
BC
DE
F
G
H
100˚
AB
CD
EF
GH
IJ
KLM N
O
PR
S
T
UV
WX
A
BC
D
100° Rotation
of 32-6
260° Rotation
of 32-1
CD
E
260˚
B
A
Insert Arrangement 32-7 32-9 32-13 32-15
Service Rating A, B, h, j = Inst.; Bal. = A D D D
Number of Contacts 7 28 2 12 5 18 2 6
Contact Size 12 16 4 16 12 16 0 12
Insert Arrangement 32-16 32-17 32-19 32-63
Service Rating A D A = E, Bal. = D D
Number of Contacts 2 3 2 16 4 2 3 5
Contact Size 4 8 12 16 4 0 12 4
Insert Arrangements
CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015 MATRIX
M
11
AB
CDE
FG
HIJ
KLMN
OPRST
UVW X
YZab c
defg
hjkm
np
r
t
s
uv
xy
z
w
A
BC
DE
F
GH
IJKL
M
NOPR
STU
V
WX
Y
Za
bcde
fg hj
k
m
npr
t
u
vw
s
xy
z
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
AB
CD EFG
HJKLMN
OPQR ST U
VWXYZabc
de fg hj k
mnpr
tuvw
s
x
yz
q
100˚
AB
CD EFG
HJKLMN
OPQRSTU
VWXY Zabc
def g hj k
mnpr
tuvw
s
x
yz
q
100° Rotation
of 36-10
Insert Arrangement 32-73 36-3 36-5 36-6
Service Rating A D A A
Number of Contacts 46 3 3 4 2 4
Contact Size 16 0 12 0 0 4
Insert Arrangement 36-7 36-8 36-9 36-10
Service Rating A A A A
Number of Contacts 7 40 1 46 1 2 14 14 48
Contact Size 12 16 12 16 4 8 12 16 16
Insert Arrangement 36-11 36-12 36-15 36-16
Service Rating A A M = D, Bal. = A A
Number of Contacts 48 48 35 7 40
Contact Size 16 16 16 12 16
Front Face of Pin Insert or Rear Face of Socket Insert Illustrated
Insert Arrangements
CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
F
A
B
C
D
A
B
C
D
E
F
1
2
3
4
5
6
7
8
9
1011
12
13
14
15
16
17
18
19
20 21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
110˚
AB
CD EFG
HJ KLMN
OPQR STU
VWXY Zabc
de fg hjk
mnpr
tu vw
s
x
yz
q
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
YZ
a
b
c
d
e
f
gh
j
k
m
100˚
AB
CDE
FG
HIJ
KLMN
OPRS
T
UVWX
YZabc
defg
hjkm
np
r
t
uv
w
s
xy
z
110° Rotation of
36-10
100° Rotation
of 36-7
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015
MATRIX
M
12
110˚
AB
CDE
FG
HIJ
KLMN
OPRST
UVWX
YZabc
defg
hjkm
np
r
t
uv
w
s
xy
z
100˚
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
ABC
D
EFHJ
K
LM NPRS
TUVWXY Z
abcdfghi
jkmn pr
tuvw
sx
yz
q
AA AB AC
AD
AE AF
AH
ABC
DE FG
HI JKL
MNOPRS
TU VWX
YZ ab
cde
* Consult Amphenol Aerospace for availability.
100° Rotation
of 36-9
260° Rotation
of 36-9
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
260˚
Front Face of Pin Insert or Rear Face of Socket Insert Illustrated
Insert Arrangement 36-18 36-21 36-52 36-17
Service Rating A A A A
Number of Contacts 1 2 14 14 1 2 14 14 52 7 40
Contact Size 4 8 12 16 4 8 12 16 16 12 16
Insert Arrangement 40-1 40-5* 40-9 40-56
Service Rating D A A A
Number of Contacts 6 24 3 2 4 6 1 22 24 85
Contact Size 12 16 0 4 8 2 6 12 16 16
Insert Arrangements
CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
AB
CDE
F
GHIJ
KL
MN OPQ
RST
UVWXYZa
bcd
efg h i
jk
lm
n
p
r
tu
s
o
q
ABCD
EF HJ KLM
NPRSTUVW
XYZabcdfg
hijkmn pr
tuvw
s
xyz
q
AA AB
AC AD AE AF AH AJ AK AL AM AN
AP AR AS AT
AU AV AW AX AY
AZ BA BB
BV
BC BD BE BF BH
BJ BK BL BM BN
BS BT BU
BP BR
110° Rotation of
36-7
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015 MATRIX
M
13
Class Descriptions, Performance Specifications
CLASS DESCRIPTIONS
MILITARY MIL-DTL-5015
Class L* Aluminum shell, electroless nickel nish,
uid resistant insert
Class W Aluminum shell, cadmium olive drab nish,
uid resistant insert
Class LS Stainless steel shell, passivated, uid
resistant insert
Class KT** Firewall, steel shell, cadmium olive drab nish, non-
ammable hard dielectric and uid resistant insert
Class KS Firewall, stainless steel shell, passivated, non-
amma ble hard dielectric and uid resistant insert
* Class L inactivates older Class U (aluminum, electroless nickel)
** Class KT (ferrous alloy, cadmium/olive drab) inactivates older Class K
(ferrous alloy, electroless nickel)
AMPHENOL/MATRIX
Class A Aluminum shell, black anodize nish,
uid resistant insert
Class F Aluminum shell, electroless nickel nish,
uid resistant insert
Class W Aluminum shell, cadmium/olive drab nish,
uid resistant insert
Class FS Stainless steel shell, passivated, uid resistant insert
Class KT Firewall, steel shell, cadmium olive drab nish, non-
ammable hard dielectric and uid resistant insert
Class KS Firewall, stainless steel shell, passivated,
non-amma ble hard dielectric and uid resistant insert
Class DT Aluminum shell, Durmalon (Nickle PTFE)
Class DZ Aluminum shell, Black Zinc Nickel*
* Not available in size 36 or 40
VOLTAGE RATING
Altitude Inst. A D E B C
Sea Level 1000 2000 2800 3500 4500 7000
50,000 ft. 400 600 675 750 825 975
70,000 ft. 260 360 400 440 480 560
110,000 ft. 200 200 200 200 200 200
PERFORMANCE SPECIFICATIONS
SHOCK
Wired, mated connectors are subjected to one shock in each of three mutu ally
perpendicular axes with pulse of an approximate half sine wave of 50g magnitude for a
duration of 11 milliseconds. All contacts wired in series cir cuit with 100 ±10
Milliamperes of current ow.
OPERATING TEMPERATURE RANGE
Classes L, LS and KS have temperature range of
–55°C (–75°F) to 200°C (392°F)
Classes W and KT have temperature range of
–55°C (–75°F) to 175°C (347°F)
ENVIRONMENTAL SEAL
Wired, mated connectors with the specied accessory attached will meet the
altitude immersion test specied in MIL-DTL-5015.
DURABILITY
Minimum of 100 mating cycles.
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015
MATRIX
M
14
To avoid cross-plugging problems in applications requiring the
use of more than one connector of the same size and arrange-
ment, alternate rotations are available as indicated in the
accompanying charts.
As shown in the diagram below, the front face of the pin insert is
rotated within the shell in a clockwise direction from the normal
shell key. The socket insert would be rotated counter-clockwise
the same number of degrees in respect to the normal shell key.
The charts give the W, X, Y, Z positions for the alternate rotations
available for the insert arrangements of the rear release
MIL-DTL-5015 series of connectors. If an insert arrangement
number is not given, then there is no available alternate rotation
for that pattern.
AB
AB
A
B
A
B
The following insert arrangements have the same alternate
insert rotations for W, X, Y and Z, which are:
Degrees
W X Y Z
80 110 250 280
16-7 20-22 24-4 28-4 28-21 40-3
18-5 22-6 24-5 28-8 32-1 40-4
18-9 22-12 24-6 28-9 32-3 40-5
18-13 22-14 24-7 28-10 32-6 40-6
18-14 22-15 24-12 28-11 32-9 40-7
20-7 22-17 24-16 28-15 32-13 40-11
20-8 22-18 24-20 28-16 32-22
20-9 22-19 24-21 28-17 36-7
20-14 22-21 24-28 28-19 36-8
20-16 24-1 28-1 28-20 40-2
Insert
Arrangement
Degrees
W X Y Z
12S-3 70 145 215 290
14S-2 – 120 240 –
14S-5 – 110 – –
14S-7 90 180 270 –
14S-9 70 145 215 290
16S-1 80 – – 280
16S-4 35 110 250 325
16S-8 – 170 265 –
16-9 35 110 250 325
16-10 90 180 270 –
16-11 35 110 250 325
16-13 35 110 250 325
18-1 70 145 215 290
18-4 35 110 250 325
18-8 70 – – 290
18-10 – 120 240 –
18-11 – 170 265 –
18-12 80 – – 280
18-15 – 120 240 –
18-19 – 120 240 –
18-22 70 145 215 290
20-4 45 110 250 –
20-15 80 – – 280
Insert
Arrangement
Degrees
W X Y Z
20-17 90 180 270 –
20-18 35 110 250 325
20-19 90 180 270 –
20-21 35 110 250 325
20-24 35 110 250 325
20-27 35 110 250 325
20-29 80 – – 280
22-2 70 145 215 290
22-4 35 110 250 325
22-5 35 110 250 325
22-9 70 145 215 290
22-10 35 110 250 325
22-11 35 110 250 325
22-22 – 110 250 –
22-23 35 – 250 –
22-27 80 – 250 280
22-36 90 – 270 –
24-2 80 – – 280
24-10 80 – – 280
24-11 35 110 250 325
24-22 45 110 250 –
24-27 80 – – 280
24-80 35 145 240 300
Insert
Arrangement
Degrees
W X Y Z
28-2 35 110 250 325
28-3 70 145 215 290
28-5 35 110 250 325
28-12 90 180 270 –
28-18 70 145 215 290
28-22 70 145 215 290
32-2 70 145 215 290
32-7 80 125 235 280
32-15 35 110 250 280
32-17 45 110 250 –
32-73 36 – – –
36-3 70 145 215 290
36-5 – 120 240 –
36-6 35 110 250 325
36-9 80 125 235 280
36-10 80 125 235 280
36-15 60 125 245 305
36-52 72 144 216 288
36-66 110 250 260 280
40-1 65 130 235 300
40-9 65 125 255 310
40-10 65 125 255 310
40-56 72 144 216 288
40-62 30 130 220 290
Insert Alternate Positioning
Position W Position X Position Y Position Z
View looking into front face of pin insert or rear of socket insert.
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015 MATRIX
M
15
NEW
NEW
How to Order
1. 2. 3. 4. 5. 6. 7.
MIL-DTL-5015 with rear
release crimp contacts
Connector
Type
Shell
Style
Service
class
Shell Size–
Insert Arrangement
Contact
Types
Alternate
Positions
Modification
Number
MILITARY MS 3456 L 16S–8 P W NA
COMMERCIAL 944 6 F 16S–8 P W (XXX)
2. SHELL STYLE - THREADED COUPLING
3450 Wall mounting receptacle
3451 Cable connecting receptacle
3452 Box mounting receptacle
3454 Jam nut receptacle
3456 Straight plug
3459 Straight plug with self-locking coupling nut
1. MILITARY CONNECTORY TYPE
MS Designates Military Standard
3. SERVICE CLASS
LAluminum shell, electroless nickel nish,
uid resis tant insert
WAluminum shell, cadmium olive drab nish,
uid resistant insert
LS Stainless steel shell, passivated, uid resistant insert
FIREWALL STYLES ONLY AVAILABLE FOR
3450, 3456, 3459 PER MIL SPEC:
KT Firewall, steel shell, cadmium/olive drab nish, non-
ammable hard dielectric and uid resistant insert
KS Firewall, stainless steel shell, passivated, non-am-
mable hard dielectric and uid resistant insert
4. SHELL SIZE & INSERT ARRANGEMENT
SEE PAGES 3-13
First number represents Shell Size,
second number is the Insert Arrangement.
5. CONTACT TYPE
PPin
SSocket
ALess pins
BLess sockets
Note: Class L inactivates older Class U.
Class K is inactive and has been replaced by Class KT
for all applications.
6. ALTERNATE POSITIONS
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell
from normal position. No letter required for normal
(no rotation) position. See page 15 for description of
alternate positions.
2. SHELL STYLE - THREADED COUPLING
0Wall mounting receptacle
1Cable connecting receptacle
2Box mounting receptacle
4Jam nut receptacle
6Straight plug
2. SELF LOCKING/QUICK DISCONNECT (981)
6Straight plug with self-locking coupling nut
7Quick disconnect plug with lanyard
8Quick disconnect plug without lanyard
1. COMMERCIAL CONNECTOR TYPE
944 Designates Amphenol/Matrix Commercial Series
981 Designates self locking/Quick disconnect (+)(-) lanyard
3. SERVICE CLASS
AAluminum shell, black anodize nish,
uid resistant insert (not MIL-Spec)
FAluminum shell, electroless nickel nish,
uid resis tant insert
WAluminum shell, cadmium olive drab nish,
uid resistant insert
FS Stainless steel shell, passivated,
uid resistant insert
RS Fluid resistant insert
KT Firewall, steel shell, cadmium/olive drab nish,
non-ammable hard dielectric and uid resistant insert
KS Firewall, stainless steel shell, passivated,
non-am mable hard dielectric and uid resistant insert
DT Aluminum shell, Durmalon (Nickle PTFE)
DZ Aluminum shell, Black Zinc Nickel*
* Not available in size 36 or 40
5. CONTACT TYPE
PPin
SSocket
6. ALTERNATE POSITIONS
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell
from normal position. No letter required for normal
(no rotation) position. See page 15 for description of
alternate positions.
Consult Amphenol Aerospace for information.
For strain reliefs use the following modication codes:
(189) E-nut M85049/31 conguration
(190) Straight strain relief M85049/52 conguration
(191) 90° strain relief M85049/51 conguration
(988) RADSOK sockets (sizes 0-8 guage only)
7. MODIFICATION NUMBER
4. SHELL SIZE & INSERT ARRANGEMENT
SEE PAGES 3-13
First number represents Shell Size,
second number is the Insert Arrangement.
NEW
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015
MATRIX
M
16
H Accessory Thread
3 Teeth Equally
Placed 120 Apart
Blue Color Band
E Dia.
Max
G Min. Full
Thread
J Coupling
Thread
D Max.
FK
Polarizing
Key
A Typ.
B Typ.
B Typ.
PANEL CUTOUT
C Dia.
4 Holes
C Dia.
L Dia.
˚
Shell
Size*
A
±.031 B
C Dia.
+.010
–.005
D Max.
E
Dia.
Max.
FG
Min.
H
Thread
Class 2A
J
Thread
Class 2A
K
L
Dia.
±.010
Class
A, F, R,
W
Class
K
Size
16 & 12
Contacts
Size
8, 4, 0
Contacts
8S .875 .594 .120 .150 2.031 – .305 .593/.562 .290 .5000-20 UNEF .5000-28 UNEF .083 .562
10S 1.000 .719 .120 .150 2.031 – .405 .593/.562 .290 .6250-24 UNEF .6250-24 UNEF .083 .688
10SL 1.000 .719 .120 .150 2.031 – .405 .593/.562 .290 .6250-24 UNEF .6250-24 UNEF .083 .688
12 1.094 .812 .120 .150 2.125 – .549 .781/.750 .290 .7500-20 UNEF .7500-20 UNEF .083 .812
12S 1.094 .812 .120 .150 2.031 – .549 .593/.562 .290 .7500-20 UNEF .7500-20 UNEF .083 .812
14 1.188 .906 .120 .150 2.125 – .665 .781/.750 .290 .8750-20 UNEF .8750-20 UNEF .083 .938
14S 1.188 .906 .120 .150 2.031 – .665 .593/.562 .290 .8750-20 UNEF .8750-20 UNEF .083 .938
16 1.281 .969 .120 .150 2.125 2.500 .790 .781/.750 .290 1.0000-20 UNEF 1.0000-20 UNEF .083 1.062
16S 1.281 .969 .120 .150 2.031 – .790 .593/.562 .290 1.0000-20 UNEF 1.0000-20 UNEF .083 1.062
18 1.375 1.062 .120 .177 2.125 2.500 .869 .781/.750 .290 1.0625-18 UNEF 1.1250-18 UNEF .125 1.188
20 1.500 1.156 .120 .177 2.125 2.500 .994 .781/.750 .290 1.1875-18 UNEF 1.2500-18 UNEF .125 1.312
22 1.625 1.250 .120 .177 2.125 2.500 1.119 .781/.750 .290 1.3125-18 UNEF 1.3750-18 UNEF .125 1.438
24 1.750 1.375 .147 .177 2.125 2.500 1.244 .843/.812 .290 1.4375-18 UNEF 1.5000-18 UNEF .125 1.562
28 2.000 1.562 .147 .177 2.125 2.500 1.465 .843/.812 .467 1.7500-18 UNS 1.7500-18 UNS .125 1.812
32 2.250 1.750 .173 .209 2.125 2.500 1.715 .906/.875 .467 2.0000-18 UNS 2.0000-18 UNS .125 2.062
36 2.500 1.938 .173 .209 2.125 2.500 1.930 .906/.875 .467 2.2500-16 UN 2.2500-16 UN .125 2.312
40 2.750 2.188 .173 .209 2.125 2.500 2.145 .906/.875 .467 2.5000-16 UN 2.5000-16 UN .125 2.562
* Consult Amphenol Aerospace for availability of shell sizes 44 and 48.
Wall Mounting Receptacle
Military (MS3450), Commercial (9440)
9440
MILITARY
MS3450
COMMERCIAL
PART NUMBER BUILDER PAGE M16
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015 MATRIX
M
17
H Accessory Thread
3 Teeth Equally
Placed 120 Apart
Blue Color
Band
E Dia.
Max
J
Coupling
Thread
D Max.
F
G
Polarizing Key
C
B
Dia.
A
˚
Shell
Size A
B
Dia.
±.031
C
D Max.
E
Dia.
Max.
F
±.015
G
Min.
H
Thread
Class 2A
J
Thread
Class 2A
Size
16 & 12
Contacts
Size
8, 4, 0
Contacts
8S .504/.496 .729 .577/.562 2.031 – .305 .083 .290 .5000-20 UNEF .5000-28 UNEF
10S .629/.621 .854 .577/.562 2.031 – .405 .083 .290 .6250-24 UNEF .6250-24 UNEF
10SL .629/.621 .854 .577/.562 2.031 – .405 .083 .290 .6250-24 UNEF .6250-24 UNEF
12 .754/.746 .974 .765/.750 2.125 – .549 .083 .290 .7500-20 UNEF .7500-20 UNEF
12S .754/.746 .974 .577/.562 2.031 – .549 .083 .290 .7500-20 UNEF .7500-20 UNEF
14 .879/.871 1.099 .765/.750 2.125 – .665 .083 .290 .8750-20 UNEF .8750-20 UNEF
14S .879/.871 1.099 .577/.562 2.031 – .665 .083 .290 .8750-20 UNEF .8750-20 UNEF
16 1.005/.996 1.224 .765/.750 2.125 2.500 .790 .083 .290 1.0000-20 UNEF 1.0000-20 UNEF
16S 1.005/.996 1.224 .577/.562 2.031 – .790 .083 .290 1.0000-20 UNEF 1.0000-20 UNEF
18 1.131/1.121 1.349 .765/.750 2.125 2.500 .869 .125 .290 1.0625-18 UNEF 1.1250-18 UNEF
20 1.256/1.246 1.474 .765/.750 2.125 2.500 .994 .125 .290 1.1875-18 UNEF 1.2500-18 UNEF
22 1.381/1.371 1.599 .765/.750 2.125 2.500 1.119 .125 .290 1.3125-18 UNEF 1.3750-18 UNEF
24 1.506/1.496 1.715 .827/.812 2.125 2.500 1.244 .125 .290 1.4375-18 UNEF 1.5000-18 UNEF
28 1.756/1.746 1.974 .827/.812 2.125 2.500 1.465 .125 .467 1.7500-18 UNS 1.7500-18 UNS
32 2.007/1.996 2.224 .890/.870 2.125 2.500 1.715 .125 .467 2.0000-18 UNS 2.0000-18 UNS
36 2.257/2.246 2.474 .890/.870 2.125 2.500 1.930 .125 .467 2.2500-16 UN 2.2500-16 UN
40 2.511/2.456 2.724 .890/.870 2.125 2.500 2.145 .125 .467 2.5000-16 UN 2.5000-16 UN
* Consult Amphenol Aerospace for availability of shell sizes 44 and 48.
Cable Connecting Receptacle
Military (MS3451), Commercial (9441)
9441
MILITARY
MS3451
COMMERCIAL
PART NUMBER BUILDER PAGE M16
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015
MATRIX
M
18
Blue Color Band
E Dia.
Max
J Coupling
Thread
D Max.
FG
Polarizing
Key
A Typ.
B Typ.
B Typ.
PANEL CUTOUT
C Dia.
4 Holes
C Dia.
L Dia.
Shell
Size*
A
±.031 BC
Dia.
D Max.
E
Dia.
±.016
FG
±.015
J
Thread
Class 2A
L
Dia.
±.010
Size
16 & 12
Contacts
Size
8, 4, 0
Contacts
8S .875 .594 .130/.115 1.662 – .500 .578/.562 .083 .5000-28 UNEF .562
10S 1.000 .719 .130/.115 1.662 – .625 .578/.562 .083 .6250-24 UNEF .688
10SL 1.000 .719 .130/.115 1.662 – .625 .578/.562 .083 .6250-24 UNEF .688
12 1.094 .812 .130/.115 1.662 – .750 .765/.750 .083 .7500-20 UNEF .812
12S 1.094 .812 .130/.115 1.662 – .750 .578/.562 .083 .7500-20 UNEF .812
14 1.188 .906 .130/.115 1.662 – .875 .765/.750 .083 .8750-20 UNEF .938
14S 1.188 .906 .130/.115 1.662 – .875 .577/.562 .083 .8750-20 UNEF .938
16 1.281 .969 .130/.115 1.662 1.937 1.000 .765/.750 .083 1.0000-20 UNEF 1.062
16S 1.281 .969 .130/.115 1.662 – 1.000 .577/.562 .083 1.0000-20 UNEF 1.062
18 1.375 1.062 .130/.115 1.662 1.937 1.062 .765/.750 .125 1.1250-18 UNEF 1.188
20 1.500 1.156 .130/.115 1.662 1.937 1.187 .765/.750 .125 1.2500-18 UNEF 1.312
22 1.625 1.250 .130/.115 1.662 1.937 1.312 .765/.750 .125 1.3750-18 UNEF 1.438
24 1.750 1.375 .157/.142 1.662 1.937 1.437 .827/.812 .125 1.5000-18 UNEF 1.562
28 2.000 1.562 .157/.142 1.662 1.937 1.750 .827/.812 .125 1.7500-18 UNS 1.812
32 2.250 1.750 .183/.168 1.662 1.937 2.000 .988/.875 .125 2.0000-18 UNS 2.062
36 2.500 1.938 .183/.168 1.662 1.937 2.250 .988/.875 .125 2.2500-16 UN 2.312
40 2.750 2.188 .183/.168 1.662 1.937 2.500 .988/.875 .125 2.5000-16 UN 2.562
* Consult Amphenol Aerospace for availability of shell sizes 44 and 48.
Box Mounting Receptacle
Military (MS3452), Commercial (9442)
9442
MILITARY
MS3452
COMMERCIAL
PART NUMBER BUILDER PAGE M16
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015 MATRIX
M
19
PANEL CUTOUT
Blue Color
Band
J Coupling
Thread
Pin Protrusion
A Typ. .045
.035
.180
.165
.128 Max.
Panel Thickness
G
Min. Full Thread
3 Teeth
Equally Spaced
120 Apart
H Accessory
Thread
.100
.095
.196
.186
M
Dia.
C
Dia.
B
Typ.
E
Dia
Max.
Polarizing
Key
L
D Max
F
O-Ring
˚
Shell
Size*
A
±.010
B
±.005
C
Dia.
±.005
D Max.
E
Dia.
Max.
F
±.005
G
Min.
H
Thread
Class 2A
J
Thread
Class 2A
Panel Cutout
Dimensions
Size
16 & 12
Contacts
Size
8, 4, 0
Contacts
L
±.005
M Dia.
+.015
–.000
8S .687 1.187 1.272 2.031 – .305 .720 .290 .5000-20 UNEF .5000-28 UNEF .323 .505
10S .812 1.312 1.397 2.031 – .405 .720 .290 .6250-24 UNEF .6250-24 UNEF .385 .630
10SL .812 1.312 1.397 2.031 – .405 .720 .290 .6250-24 UNEF .6250-24 UNEF .385 .630
12 .937 1.437 1.522 2.125 – .549 .970 .290 .7500-20 UNEF .7500-20 UNEF .448 .755
12S .937 1.437 1.522 2.031 – .549 .720 .290 .7500-20 UNEF .7500-20 UNEF .448 .755
14 1.125 1.562 1.647 2.125 – .665 .970 .290 .8750-20 UNEF .8750-20 UNEF .510 .880
14S 1.125 1.562 1.647 2.031 – .665 .720 .290 .8750-20 UNEF .8750-20 UNEF .510 .880
16 1.250 1.687 1.772 2.125 2.500 .790 .970 .290 1.0000-20 UNEF 1.0000-20 UNEF .573 1.005
16S 1.250 1.687 1.772 2.031 – .790 .720 .290 1.0000-20 UNEF 1.0000-20 UNEF .573 1.005
18 1.375 1.812 1.897 2.125 2.500 .869 .970 .290 1.0625-18 UNEF 1.1250-18 UNEF .635 1.130
20 1.500 1.937 2.022 2.125 2.500 .994 .970 .290 1.1875-18 UNEF 1.2500-18 UNEF .698 1.255
22 1.625 2.156 2.241 2.125 2.500 1.119 .970 .290 1.3125-18 UNEF 1.3750-18 UNEF .760 1.380
24 1.750 2.281 2.366 2.125 2.500 1.244 .970 .290 1.4375-18 UNEF 1.5000-18 UNEF .823 1.505
28 2.000 2.531 2.616 2.125 2.500 1.465 .970 .467 1.7500-18 UNS 1.7500-18 UNS .948 1.755
32 2.375 2.781 2.866 2.125 2.500 1.715 .970 .467 2.0000-18 UNS 2.0000-18 UNS 1.073 2.005
36 2.625 3.031 3.116 2.125 2.500 1.930 .970 .467 2.2500-16 UN 2.2500-16 UN 1.198 2.255
40 2.875 3.281 3.366 2.125 2.500 2.145 .970 .467 2.5000-16 UN 2.5000-16 UN 1.323 2.505
* Consult Amphenol Aerospace for availability of shell sizes 44 and 48.
Jam Nut Receptacle
Military (MS3454), Commercial (9444)
9444
MILITARY
MS3454
COMMERCIAL
PART NUMBER BUILDER PAGE M16
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015
MATRIX
M
20
Polarizing Keyway
Blue Color Band
H Accessory Thread
J Coupling
Thread
3 Teeth
Equally Spaced
120 Apart
D Min. Full
Thread
C Max.
B
Dia.
E
Dia
Max.
A
Dia Max.
˚
Shell
Size*
A
Dia.
Max.
B
Dia.
±.005
C Max.
D
Min.
E
Dia.
Max.
H
Thread
Class 2A
J
Thread
Class 2B
Size
16 & 12
Contacts
Size
8, 4, 0
Contacts
8S .844 .360 2.031 – .290 .305 .5000-20 UNF .5000-28 UNEF
10S .969 .435 2.031 – .290 .405 .6250-24 UNEF .6250-24 UNEF
10SL .969 .441** 2.031 – .290 .405 .6250-24 UNEF .6250-24 UNEF
12 1.062 .550 2.125 – .290 .549 .7500-20 UNEF .7500-20 UNEF
12S 1.062 .550 2.031 – .290 .549 .7500-20 UNEF .7500-20 UNEF
14 1.156 .670 2.125 – .290 .665 .8750-20 UNEF .8750-20 UNEF
14S 1.156 .670 2.031 – .290 .665 .8750-20 UNEF .8750-20 UNEF
16 1.250 .800 2.125 2.500 .290 .790 1.0000-20 UNEF 1.0000-20 UNEF
16S 1.250 .800 2.031 – .290 .790 1.0000-20 UNEF 1.0000-20 UNEF
18 1.344 .925 2.125 2.500 .290 .869 1.0625-18 UNEF 1.1250-18 UNEF
20 1.469 1.045 2.125 2.500 .290 .994 1.1875-18 UNEF 1.2500-18 UNEF
22 1.594 1.170 2.125 2.500 .290 1.119 1.3125-18 UNEF 1.3750-18 UNEF
24 1.719 1.295 2.125 2.500 .290 1.244 1.4375-18 UNEF 1.5000-18 UNEF
28 1.969 1.515 2.125 2.500 .467 1.465 1.7500-18 UNS 1.7500-18 UNS
32 2.219 1.765 2.125 2.500 .467 1.715 2.0000-18 UNS 2.0000-18 UNS
36 2.469 1.975 2.125 2.500 .467 1.930 2.2500-16 UN 2.2500-16 UN
40 2.719 2.225 2.125 2.500 .467 2.145 2.5000-16 UN 2.5000-16 UN
* Consult Amphenol Aerospace for availability of shell sizes 44 and 48.
**Tolerance on this dimension is +.000 –.006
Straight Plug
Military (MS3456), Commercial (9446)
9446
MILITARY
MS3456
COMMERCIAL
PART NUMBER BUILDER PAGE M16
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015 MATRIX
M
21
Polarizing Keyway
Blue Color Band
H Accessory Thread
Fully Coupled
Indicator
J Coupling
Thread
D Min. Full
Thread
C Max.
Clutch Plate
B
Dia.
E
Dia
Max.
A
Dia Max.
3 Teeth
Equally Spaced
120 Apart
˚
Shell
Size*
A
Dia.
Max.
B
Dia.
±.005
C Max.
D
Min.
E
Dia.
Max.
H
Thread
Class 2A
J
Thread
Class 2B
Size
16 & 12
Contacts
Size
8, 4, 0
Contacts
8S .963 .360 1.510 – .290 .305 .5000-20 UNEF .5000-28 UNEF
10S 1.088 .435 1.510 – .290 .405 .6250-24 UNEF .6250-24 UNEF
10SL 1.088 .441** 1.510 – .290 .405 .6250-24 UNEF .6250-24 UNEF
12 1.213 .550 1.780 – .290 .549 .7500-20 UNEF .7500-20 UNEF
12S 1.213 .550 1.510 – .290 .549 .7500-20 UNEF .7500-20 UNEF
14 1.358 .670 1.780 – .290 .665 .8750-20 UNEF .8750-20 UNEF
14S 1.358 .670 1.510 – .290 .665 .8750-20 UNEF .8750-20 UNEF
16 1.463 .800 1.780 2.500 .290 .790 1.0000-20 UNEF 1.0000-20 UNEF
16S 1.463 .800 1.510 – .290 .790 1.0000-20 UNEF 1.0000-20 UNEF
18 1.588 .925 1.850 2.500 .290 .869 1.0625-18 UNEF 1.1250-18 UNEF
20 1.713 1.045 1.850 2.500 .290 .994 1.1875-18 UNEF 1.2500-18 UNEF
22 1.788 1.170 1.850 2.500 .290 1.119 1.3125-18 UNEF 1.3750-18 UNEF
24 1.963 1.295 1.850 2.500 .290 1.244 1.4375-18 UNEF 1.5000-18 UNEF
28 2.213 1.515 1.850 2.500 .467 1.465 1.7500-18 UNS 1.7500-18 UNS
32 2.463 1.765 1.850 2.500 .467 1.715 2.0000-18 UNS 2.0000-18 UNS
36 2.713 1.975 1.850 2.500 .467 1.930 2.2500-16 UN 2.2500-16 UN
40 2.963 2.225 1.850 2.500 .467 2.145 2.5000-16 UN 2.5000-16 UN
* Consult Amphenol Aerospace for availability of shell sizes 44 and 48.
**Tolerance on this dimension is +.000 –.006
Straight Plug with Self-locking Coupling Nut
Military (MS3459), Commercial (9816)
9816
MILITARY
MS3459
COMMERCIAL
PART NUMBER BUILDER PAGE M16
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015
MATRIX
M
22
Polarizing
Keyway H Thread
C Max.
D Min. Perf.
Thread
7.500 Max
Blue Color Band Designates
Rear Release Contact Connector
A
Dia Max.
E Dia. Max.
B Dia.
.061
.046
3 Teeth
Equally Spaced
120 Apart
˚
Adapter
Mating Face of
Receptacle Shell
Shell
Size*
A
Dia.
Max.
B
Dia.
C Max.
D
Min.
E
Dia.
Max.
H
Thread
Class 2A
Amphenol/
Matrix Part
Number for
Adapter Ring
Size
16 & 12
Contacts
Size
8, 4, 0
Contacts
8S 1.087 .360 2.031 – .290 .305 .5000-20 UNF 2500-008-0X08
10S 1.224 .435 2.031 – .290 .405 .6250-24 UNEF 2500-008-0X10
10SL 1.224 .441 2.031 – .290 .405 .6250-24 UNEF 2500-008-0X10
12 1.355 .550 2.125 – .290 .549 .7500-20 UNEF 2500-008-0X12
12S 1.355 .550 2.031 – .290 .549 .7500-20 UNEF 2500-008-0X13
14 1.482 .670 2.125 – .290 .665 .8750-20 UNEF 2500-008-0X14
14S 1.482 .670 2.031 – .290 .665 .8750-20 UNEF 2500-008-0X15
16 1.609 .800 2.125 2.500 .290 .790 1.0000-20 UNEF 2500-008-0X16
16S 1.609 .800 2.031 – .290 .790 1.0000-20 UNEF 2500-008-0X17
18 1.817 .925 2.125 2.500 .290 .869 1.0625-18 UNEF 2500-008-0X18
20 1.942 1.045 2.125 2.500 .290 .994 1.1875-18 UNEF 2500-008-0X20
22 2.075 1.170 2.125 2.500 .290 1.119 1.3125-18 UNEF 2500-008-0X22
24 2.203 1.295 2.125 2.500 .290 1.244 1.4375-18 UNEF 2500-008-0X24
28 2.516 1.515 2.125 2.500 .467 1.465 1.7500-18 UNS 2500-008-0X28
32 2.735 1.765 2.125 2.500 .467 1.715 2.0000-18 UNS 2500-008-0X32
36 3.015 1.975 2.125 2.500 .467 1.930 2.2500-16 UN 2500-008-0X36
40 3.306 2.225 2.125 2.500 .467 2.145 2.5000-16 UN 2500-008-0X40
* Consult Amphenol Aerospace for availability of shell sizes 44 and 48.
Receptacle Adapter Ring
Required to mate the quick disconnect
plug with receptacle. Not furnished with the
quick disconnect plug and must be ordered
separately.
Note: Use Locktite Material on the threads
for a permanent installation to the
shell. How to Order Adapter Ring
Part Number
2500-008-0 X XX
Finish
0 - Electroless Nickel
1 - Black Anodize
2 - Cadmium/Olive Drab
3 - Stainless Steel, Passivated
9818 CONNECTOR 9817 CONNECTOR WITH LANYARD
Quick Disconnect Plug, with/without Lanyard
Commercial (9817)
Shell Size (varies from
connector shell size
designation, see last
column of table at left)
9818
9817
COMMERCIAL
PART NUMBER BUILDER PAGE M16
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015 MATRIX
M
23
MS/STANDARD
CRIMP REAR RELEASE CONTACTS
Contact
Size
Wire Range Socket Contacts Pin Contacts
AWG mm2Military
Part Number
Amphenol/Matrix
Part Number
Military
Part Number
Amphenol/Matrix
Part Number
16S* 20–16 0.5–1.4 M39029/30-217 M5100-033-1601L M39029/29-212 M5000-029-0016L
16 20–16 0.5–1.4 M39029/30-218 M5100-033-1602L M39029/29-212 M5000-029-0016L
12 14–12 2–3 M39029/30-219 M5100-033-0012 M39029/29-213 M5000-029-0012
8 10–8† 5–8.5 M39029/30-220 M5100-033-0008 M39029/29-214 M5000-029-0008
4 6–4† 13–21 M39029/30-221 M5100-033-0004 M39029/29-215 M5000-029-0004
0 2–0† 34–60 M39029/30-222 M5100-033-0000 M39029/29-216 M5000-029-0000
* Shorter wire barrel Note: For information on thermocouple contacts, consult Amphenol Aerospace
† Use MS3348 bushing kit to accommodate smaller wire.
CONTACT CURRENT RATING AND RETENTION
Contact
Size**
Current Rating Contact Retention
Amperes
Max.
RADSOK
Amps
Max.
Voltage
Drops
Millivolts
Axial Load
lb. N
16 13 N/A 50 25 111.2
12 23 N/A 50 30 133.4
8 46 70 25 50 222.4
4 80 120 14 60 266.9
0 150 150 12 75 333.6
** Organize individual circuits to maintain heat rise within operating
temperature requirements.
SEALING PLUGS
Contact
Size
Sealing Plugs
Military
Part Number
Amphenol/Matrix
Part Number
16S MS27488-16-3 10-405996-163
16 MS27488-16-3 10-405996-163
12 MS27488-12-3 10-405996-123
8 MS27488-8-3 10-405996-083
4 MS27488-4-3 10-405996-043
0 MS27488-0-3 10-405996-003
CRIMPING TOOLS
Contact
Size
Wire Range Finished Wire Dia. Range
Color Code Crimping Tool
Part Number
Turret or Positioner
Part Number
AWG mm2Inch mm
16S 20–16 0.5–1.4 .053–.103 1.34–2.62 Red/White M22520/1-01 M22520/1-02
16 20–16 0.5–1.4 .053–.103 1.34–2.62 Blue/White M22520/1-01 M22520/1-02
12 14–12 2–3 .085–.158 2.15–4.01 Yell./White M22520/1-01 M22520/1-02
8 10–8 5–8.5 .132–.255 3.35–6.48 White/Red M22520/23-01 M22520/23-02
4 6–4 13–21 .237–.370 6.01–9.40 White/Blue M22520/23-01 M22520/23-04
0 2–0 34–60 .360–.550 9.14–13.97 White/Yell. M22520/23-01 M22520/23-05
INSERTION/REMOVAL TOOLS
Contact
Size Color Code Military
Part Number
Amphenol/Matrix
Part Number
16 Blue/White M81969/14-03 10-538988-016
12 Yellow/White M81969/14-04 10-538988-012
8 Red M81969/14-06 6500-018-0008
4 Blue M81969/14-07 6500-018-0004
0 Yellow M81969/14-08 6500-018-0000
Amphenol installation instructions, L-2106, gives
informa tion on insertion, removal and crimping of
contacts for Matrix MIL-DTL-5015 connectors.
Contact Information, Sealing Plugs, Crimping
and Insertion/Removal Tools
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015
MATRIX
M
24
D
A THD
L
C
A THD
L
D
C
B
A THD
L
C
PLUG PROTECTION CAP 10-329393-
XX*
PLUG PROTECTION CAP 10-229125-XX*
PLUG PROTECTION CAP MS25042-XXDA*
Assembly
Number
A
Thread
Class 2A
B Dia.
+.010
–.000
C
Approx.
L
Max.
10-329393-10 (*) .625-24UNEF .641 3.5 1.312
10-329393-11(*) .625-24UNEF .641 3.5 1.312
10-329393-12(*) .750-20UNEF .766 3.5 1.500
10-329393-14(*) .875-20UNEF .891 3.5 1.500
10-329393-16(*) 1.000-20UNEF 1.016 3.5 1.500
10-329393-18(*) 1.125-18UNEF 1.141 3.5 1.500
10-329393-20(*) 1.250-18UNEF 1.266 4.0 1.500
10-329393-22(*) 1.375-18UNEF 1.391 4.0 1.500
10-329393-24(*) 1.500-18UNEF 1.641 4.5 1.500
10-329393-28(*) 1.750-18UNS 1.891 4.5 1.500
10-329393-32(*) 2.000-18UNS 2.078 5.0 1.500
10-329393-36(*) 2.250-16UN 2.328 5.0 1.500
10-329393-40(*) 2.500-16UN 2.641 5.0 1.500
Assembly
Number
A
Thread
Class 2A
B Dia.
+.010
–.000
C
Approx.
L
Max.
10-329393-44(*) 2.750-16UN 2.891 6.0 1.500
Assembly
Number
A
Thread
Class 2A
C
Approx.
D
Ref.
L
Max.
10-229125-10 .625-24NEF 3.0 .140 1.233
10-229125-12 .750-20UNEF 3.5 .140 1.421
10-229125-14 .875-20UNEF 3.5 .140 1.421
10-229125-16 1.000-20UNEF 3.5 .140 1.421
10-229125-18 1.125-18NEF 3.5 .140 1.421
10-229125-20 1.250-18NEF 3.5 .193 1.421
10-229125-22 1.375-18NEF 3.5 .193 1.421
10-229125-24 1.500-18NEF 4.5 .193 1.421
Assembly
Number
A
Thread
Class 2A
C
Approx.
D
Ref.
L
Max.
10-229125-28 1.750-18NS 4.5 .193 1.421
10-229125-32 2.000-18NS 5.0 .193 1.421
10-229125-36 2.250-16UN 5.0 .193 1.421
10-229125-40 2.500-16UN 5.0 .193 1.421
MS
Number
A
Thread
Class 2A
B Dia.
+.010
–.005
C
Approx.
L
Max.
MS25042-8DA .500-28UNEF .156 4.00 .969
MS25042-10DA .625-24UNEF .156 4.00 .969
MS25042-12DA .750-20UNEF .156 4.50 1.156
MS25042-14DA .875-20UNEF .156 4.50 1.156
MS25042-16DA 1.000-20UNEF .156 4.50 1.156
MS25042-18DA 1.125-18UNEF .156 4.50 1.156
MS25042-20DA 1.250-18UNEF .187 5.00 1.156
MS25042-22DA 1.375-18UNEF .187 5.00 1.156
MS25042-24DA 1.500-18UNEF .187 5.50 1.156
MS25042-28DA 1.750-18UNS .187 7.75 1.156
MS25042-32DA 2.000-18UNS .218 7.75 1.156
MS25042-36DA 2.250-16UN .218 7.75 1.156
MS25042-40DA 2.500-16UN .218 7.75 1.156
* Protective caps are illustrated with sash chains and are available with
beaded chains or without chains. Optional terminations are also available.
Consult Amphenol Aerospace when ordering.
Accessories
Protection Caps – Plug
* 3 = OD Cadmium Plating
G = Electroless Nickel Plating
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015 MATRIX
M
25
A THD
L
D
C
B
A THD
B
C
D
L
B
D
A THD
L
C
RECEPTACLE PROTECTION CAP 10-329394-XX*
RECEPTACLE PROTECTION CAP 10-422905-
XXX*
RECEPTACLE PROTECTION CAP MS25043-XXDA*
Assembly
Number
A
Thread
Class 2B
B
Dia.
Min.
C
Approx.
D
Dia.
Max.
L
Max.
10-329394-10 .625-24UNEF .641 3.5 .875 .793
10-329394-12 .750-20UNEF .766 3.5 1.000 .793
10-329394-14 .875-20UNEF .891 3.5 1.125 .793
10-329394-16 1.000-20UNEF 1.016 3.5 1.250 .793
10-329394-18 1.125-18UNEF 1.094 3.5 1.375 1.024
10-329394-20 1.250-18UNEF 1.203 4.0 1.500 1.024
10-329394-22 1.375-18UNEF 1.343 4.0 1.625 1.024
10-329394-24 1.500-18UNEF 1.453 4.5 1.750 1.024
10-329394-28 1.750-18UNS 1.766 4.5 2.000 1.024
10-329394-32 2.000-18UNS 2.016 5.0 2.250 1.024
10-329394-36 2.250-16UN 2.266 5.0 2.500 1.024
10-329394-40 2.500-16UN 2.516 5.0 2.656 1.024
10-329394-44 2.750-16UN 2.766 6.0 2.938 1.024
Assembly
Number
A
Thread
Class 2B
B
Ref.
C
Approx.
D
Dia.
Max.
L
Max.
10-422905-103 .625-24UNEF .140 3.0 .875 .812
10-422905-123 .750-20UNEF .140 3.5 1.000 .812
10-422905-143 .875-20UNEF .140 3.5 1.125 .812
10-422905-163 1.000-20UNEF .140 3.5 1.250 .812
10-422905-183 1.125-18UNEF .193 3.5 1.375 1.031
10-422905-203 1.250-18UNEF .193 4.0 1.500 1.031
10-422905-223 1.375-18UNEF .193 4.0 1.625 1.031
10-422905-243 1.500-18UNEF .193 4.5 1.750 1.031
10-422905-283 1.750-18UNS .193 4.5 2.000 1.031
10-422905-323 2.000-18UNS .193 5.0 2.250 1.031
Assembly
Number
A
Thread
Class 2B
B
Ref.
C
Approx.
D
Dia.
Max.
L
Max.
10-422905-363 2.250-16UN .193 5.0 2.500 1.031
10-422905-403 2.500-16UN .193 5.0 2.656 1.031
MS
Number
A
Thread
Class 2B
B
+.010
–.005
C
Approx.
D
Dia.
Max.
L
Max.
MS25043-8DA .500-28UNEF .140 4.00 .688 .750
MS25043-10DA .625-24UNEF .140 4.00 .815 .750
MS25043-12DA .750-20UNEF .140 4.50 1.000 .750
MS25043-14DA .875-20UNEF .140 4.50 1.125 .750
MS25043-16DA 1.000-20UNEF .140 4.50 1.188 .750
MS25043-18DA 1.125-18UNEF .140 4.50 1.344 .750
MS25043-20DA 1.250-18UNEF .140 5.00 1.469 .750
MS25043-22DA 1.375-18UNEF .140 5.00 1.594 .750
MS25043-24DA 1.500-18UNEF .171 5.50 1.719 .750
MS25043-28DA 1.750-18UNS .171 7.75 1.969 .812
MS25043-32DA 2.000-18UNS .187 7.75 2.219 .812
MS25043-36DA 2.250-16UN .187 7.75 2.469 .812
MS25043-40DA 2.500-16UN .187 7.75 2.719 .812
* Protective caps are illustrated with sash chains and are available with
beaded chains or without chains. Optional terminations are also available.
Consult Amphenol Aerospace when ordering.
MIL-DTL-5015 Accessories
Protection Caps – Receptacle
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
5015
MATRIX
M
26
L
B
2
L
A
C
1
10-70500 RECEPTACLE DUST CAP
FOR EXTERNAL THREADS
10-70506 PLUG DUST CAP
FOR INTERNAL THREADS
MS
Shell Size
Order
Number
A Dia.
Nominal
Thread
C
Dia.
±.031
L1
±.062
8S 10-70500-8 .500 .750 .500
10S 10-70500-10 .625 .875 .500
10SL 10-70500-10 .625 .875 .500
12S 10-70500-12 .750 1.000 .500
12 10-70500-12 .750 1.000 .500
14S 10-70500-14 .875 1.125 .500
14 10-70500-14 .875 1.125 .500
16S 10-70500-16 1.000 1.250 .500
16 10-70500-16 1.000 1.250 .500
18 10-70500-18 1.125 1.375 .562
20 10-70500-20 1.250 1.500 .562
22 10-70500-22 1.375 1.625 .562
24 10-70500-24 1.500 1.750 .562
28 10-70500-28 1.750 1.938 .562
32 10-70500-32 2.000 2.250 .562
36 10-70500-36 2.250 2.500 .625
40 10-70500-40 2.500 2.750 .625
MS
Shell Size
Order
Number
B
Dia.
Min.
L2
±.125
8S 10-70506-8S .469 .625
10S 10-70506-10S .587 .625
10SL 10-70506-10S .587 .625
12S 10-70506-12 .704 .625
12 10-70506-12 .704 .625
14S 10-70506-14 .828 .625
14 10-70506-14 .828 .625
16S 10-70506-16 .953 .625
16 10-70506-16 .953 .625
18 10-70506-18 1.072 .625
20 10-70506-20 1.197 .625
22 10-70506-22 1.322 .625
24 10-70506-24 1.447 .625
28 10-70506-28 1.697 .625
32 10-70506-32 1.947 .625
36 10-70506-36 2.190 .625
40 10-70506-40 2.440 .625
MIL-DTL-5015 Accessories
Dust Caps