ABV1
38
TURQUOISE
SWITCHES
V TYPE (ABV)
HIGH ENVIRONMENTAL
RESISTANCE
FEATURES
• Miniature size (33
×
15.9
×
10.3 mm) (1.299
×
.626
×
.406 inch)
• Sealed construction for use in adverse environment
−
Sealed construction by ep-
oxy resin and rubber cap keeps off the cause of miscontact such as dust Con-
forming to IP67* of IEC protective construction classification
• Elastomer double molding technology, an industry first and ultrasonic swaging
technology contribute to uniform seling in high production quantities
• UL/CSA/VDE/SEMKO approved
*Based on the protective construction classification of IED, items which satisfy the test
requirements are denoted with an IP designation.
TYPICAL APPLICATIONS
• Automotives
• Agricultural devices
• Industrial equipment
ORDERING INFORMATION
Type of switch
ABV1:
Turquoise switch
V type
Terminal
2:
6: .187 quick-connect terminal
Wire leads
Contact
arrangement
1:
2:
3:
SPDT
SPST-NC
SPST-NO
Actuator
0:
2:
4:
5:
6:
Pin plunger
Hinge lever
Simulated roller lever
Short roller lever
Roller lever
Operating force by
pin plunger (max.)
4:
5:
6:
0.98 N {100 gf}
1.96 N {200 gf}
2.94 N {300 gf}
Contact
1:
0: Gold-clad
Silver-alloy
Ex. ABV1 2 1 0 6 1
Remarks: 1. Standard packing: Dust protected type 50 pcs./carton, 500 pcs./case; Immersion protected type 50 pcs./case.
2. Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
CONSTRUCTION
Rubber cap
Ultrasonic swaging technology contribute for sealing
Epoxy resin Epoxy resin (include)
Wire leads
.187 quick-connect terminal Wire leads
ABV1
39
PRODUCT TYPES
Silver-alloy
Remarks: When ordering UL/CSA approved types, please attach suffix “9” to the part number.
When ordering VDE/SEMKO approved types, please attach suffix “8” to the part number.
Contact Actuator Contact
Arrangement Operating force, Max. 187 Quick-connect terminal Wire Leads
Silver-alloy
Pin plunger
SPDT 0.98 N {100 gf} ABV121040 ABV161040
1.96 N {200 gf} ABV121050 ABV161050
2.94 N {300 gf} ABV121060 ABV161060
SPST-NC 0.98 N {100 gf} ABV122040 ABV162040
1.96 N {200 gf} ABV122050 ABV162050
2.94 N {300 gf} ABV122060 ABV162060
SPST-NO 0.98 N {100 gf} ABV123040 ABV163040
1.96 N {200 gf} ABV123050 ABV163050
2.94 N {300 gf} ABV123060 ABV163060
Hinge lever
SPDT 0.59 N {60 gf} ABV121240 ABV161240
1.18 N {120 gf} ABV121250 ABV161250
1.77 N {180 gf} ABV121260 ABV161260
SPST-NC 0.59 N {60 gf} ABV122240 ABV162240
1.18 N {120 gf} ABV122250 ABV162250
1.77 N {180 gf} ABV122260 ABV162260
SPST-NO 0.59 N {60 gf} ABV123240 ABV163240
1.18 N {120 gf} ABV123250 ABV163250
1.77 N {180 gf} ABV123260 ABV163260
Simulated roller lever
SPDT 0.59 N {60 gf} ABV121440 ABV161440
1.18 N {120 gf} ABV121450 ABV161450
1.77 N {180 gf} ABV121460 ABV161460
SPST-NC 0.59 N {60 gf} ABV122440 ABV162440
1.18 N {120 gf} ABV122450 ABV162450
1.77 N {180 gf} ABV122460 ABV162460
SPST-NO 0.59 N {60 gf} ABV123440 ABV163440
1.18 N {120 gf} ABV123450 ABV163450
1.77 N {180 gf} ABV123460 ABV163460
Short roller lever
SPDT 1.08 N {110 gf} ABV121540 ABV161540
2.16 N {220 gf} ABV121550 ABV161550
3.14 N {320 gf} ABV121560 ABV161560
SPST-NC 1.08 N {110 gf} ABV122540 ABV162540
2.16 N {220 gf} ABV122550 ABV162550
3.14 N {320 gf} ABV122560 ABV162560
SPST-NO 1.08 N {110 gf} ABV123540 ABV163540
2.16 N {220 gf} ABV123550 ABV163550
3.14 N {320 gf} ABV123560 ABV163560
Roller lever
SPDT 0.59 N {60 gf} ABV121640 ABV161640
1.18 N {120 gf} ABV121650 ABV161650
1.77 N {180 gf} ABV121660 ABV161660
SPST-NC 0.59 N {60 gf} ABV122640 ABV162640
1.18 N {120 gf} ABV122650 ABV162650
1.77 N {180 gf} ABV122660 ABV162660
SPST-NO 0.59 N {60 gf} ABV123640 ABV163640
1.18 N {120 gf} ABV123650 ABV163650
1.77 N {180 gf} ABV136660 ABV163660
ABV1
40
Gold-clad
Remarks: When ordering UL/CSA approved types, please attach suffix “9” to the part number.
When ordering VDE/SEMKO approved types, please attach suffix “8” to the part number.
Contact Actuator Contact
Arrangement Operating force, Max. 187 Quick-connect terminal Wire Leads
Gold-clad
Pin plunger
SPDT 0.98 N {100 gf} ABV121041 ABV161041
1.96 N {200 gf} ABV121051 ABV161051
2.94 N {300 gf} ABV121061 ABV161061
SPST-NC 0.98 N {100 gf} ABV122041 ABV162041
1.96 N {200 gf} ABV122051 ABV162051
2.94 N {300 gf} ABV122061 ABV162061
SPST-NO 0.98 N {100 gf} ABV123041 ABV163041
1.96 N {200 gf} ABV123051 ABV163051
2.94 N {300 gf} ABV123061 ABV163061
Hinge lever
SPDT 0.59 N {60 gf} ABV121241 ABV161241
1.18 N {120 gf} ABV121251 ABV161251
1.77 N {180 gf} ABV121261 ABV161261
SPST-NC 0.59 N {60 gf} ABV122241 ABV162241
1.18 N {120 gf} ABV122251 ABV162251
1.77 N {180 gf} ABV122261 ABV162261
SPST-NO 0.59 N {60 gf} ABV123241 ABV163241
1.18 N {120 gf} ABV123251 ABV163251
1.77 N {180 gf} ABV123261 ABV163261
Simulated roller lever
SPDT 0.59 N {60 gf} ABV121441 ABV161441
1.18 N {120 gf} ABV121451 ABV161451
1.77 N {180 gf} ABV121461 ABV161461
SPST-NC 0.59 N {60 gf} ABV122441 ABV162441
1.18 N {120 gf} ABV122451 ABV162451
1.77 N {180 gf} ABV122461 ABV162461
SPST-NO 0.59 N {60 gf} ABV123441 ABV163441
1.18 N {120 gf} ABV123451 ABV163451
1.77 N {180 gf} ABV123461 ABV163461
Short roller lever
SPDT 1.08 N {110 gf} ABV121541 ABV161541
2.16 N {220 gf} ABV121551 ABV161551
3.14 N {320 gf} ABV121561 ABV161561
SPST-NC 1.08 N {110 gf} ABV122541 ABV162541
2.16 N {220 gf} ABV122551 ABV162551
3.14 N {320 gf} ABV122561 ABV162561
SPST-NO 1.08 N {110 gf} ABV123541 ABV163541
2.16 N {220 gf} ABV123551 ABV163551
3.14 N {320 gf} ABV123561 ABV163561
Roller lever
SPDT 0.59 N {60 gf} ABV121641 ABV161641
1.18 N {120 gf} ABV121651 ABV161651
1.77 N {180 gf} ABV121661 ABV161661
SPST-NC 0.59 N {60 gf} ABV122641 ABV162641
1.18 N {120 gf} ABV122651 ABV162651
1.77 N {180 gf} ABV122661 ABV162661
SPST-NO 0.59 N {60 gf} ABV123641 ABV163641
1.18 N {120 gf} ABV123651 ABV163651
1.77 N {180 gf} ABV136661 ABV163661
ABV1
41
SPECIFICATIONS
1. Contact rating
2. Characteristics
3. Operating characteristics
( ): Low force type
Type Standard rating Low-level rating
Gold-clad contact 3 A 250 V AC (O.F. 1.96 N {200gf}, 2.94 N {300gf})
1 A 250 V AC (O.F. 0.98 N {100gf}) 5 mA 6 V DC
2 mA 12 V DC
1 mA 24 V DC
Silver-alloy 5 A 250 V AC (O.F. 1.96 N {200gf}, 2.94 N {300gf})
3 A 250 V AC (O.F. 0.98 N {100gf}) —
Mechanical life (O.T.: Specified value) Min. 5x10
6
(at 60 cpm)
Electrical life Nominal rating (O.T.: Max.) Min. 10
5
(at 20 cpm)
Low-level rating (O.T.: Specified value) Min. 10
6
(at 20 cpm)
Insulation resistance Min. 100 M
Ω
(at 500 V DC insulation resistance meter)
Dielectric strength
Between non-continuous terminals
Between each terminal and other exposed metal parts
Between each terminal and ground
1,000 Vrms
2,000 Vrms
2,000 Vrms
Vibration resistance 10 to 55 Hz at single amplitude of 0.75 mm (Contact opening: max. 1 msec.)
Shock resistance Min. 294 m/s
2
{30 G} (Contact opening: Max. 1 msec.)
Contact resistance
Silver alloy contact type Dust protected type (IP50): Max. 50 m
Ω
Immersion protected type (IP67): Max. 100 m
Ω
(By voltage drop 1 A 6 to 8 V DC)
Gold-clad contact type Dust protected type (IP50): Max. 50 m
Ω
Immersion protected type (IP67): Max. 100 m
Ω
(By voltage drop 0.1 A 6 to 8 V DC)
Allowable operating speed (at no load) 1 to 500 mm/sec.
Ambient temperature (at no load)
−
40
°
C to +85
°
C –40
°
F to +185
°
F
Unit weight Approx. 7 g .247 oz (IP50 type)
Type of actuator Operating force, Max. Release force, Min. Pretravel,
Max. mm inch Movement
differential,
Max. mm inch Overtravel,
Min. mm inch Operating
position,
mm inch
Pin plunger 2.94N
{300gf} 1.96N
{200gf} 0.98N
{100gf} 0.59N
{60gf} 0.39N
{40gf} 0.25N
{25gf} 1.6
.063 0.4
.016 0.8
.031 14.7
±
0.6
.579
±
.024
Hinge lever 1.77N
{180gf} 1.18N
{120gf} 0.59N
{60gf} 0.20N
{20gf} 0.13N
{13gf} 0.098N
{10gf} 3.2
.126 1.2
.047 1.2
.047 15.3
±
1.2
.602
±
.047
Simulated roller lever 1.77N
{180gf} 1.18N
{120gf} 0.59N
{60gf} 0.20N
{20gf} 0.13N
{13gf} 0.098N
{10gf} 3.2
.126 1.2
.047 1.2
.047 18.5
±
1.2
.728
±
.047
Short roller lever 3.14N
{320gf} 2.16N
{220gf} 1.08N
{110gf} 0.59N
{60gf} 0.39N
{40gf} 0.20N
{20gf} 1.6
.063 0.5
.020 0.8
.031 20.7
±
0.8
.815
±
.031
Roller lever 1.77N
{180gf} 1.18N
{120gf} 0.59N
{60gf} 0.20N
{20gf} 0.13N
{13gf} 0.098N
{10gf} 3.2
.126 1.2
.047 1.2
.047 20.7
±
1.2
.815
±
.047
DIMENSIONS
1. Dust protected type
1-(1) .187 quick-connect terminal
Pin plunger
mm inch General tolerance:
±
0.4
±
.016
.874±.004
22.2±-0.1
Position .110
.406±.004
10.3±-0.1
2.8
-0.05
+0.25
+.010
-.002
.110
.579±.024
14.7±0.6
3.1
.122 3.4
.134
Operating
1.6 max
.063
Pretravel
2.8
.020
0.5
15.9
.626
5.2
.205
5.2
.205
.394
.406
10.3
10
dia.
dia.
-0.05
+0.25
.122
+.010
-.002
3.1
.098
2.5
4.75
.187
.795±.012
20.2±0.3
1.299
33
1.791
45.5
1.654
42
Pretravel,
Max. mm inch 1.6 .063
Movement differential,
Max. mm inch 0.4 .016
Overtravel,
Min. mm inch 0.8 .031
Operating position,
mm inch 14.7
±
0.6
.579
±
.024
ABV1
42
Hinge lever
mm inch General tolerance:
±
0.25
±
.010
.602±.047
1.213
R30.8
15.3±1.2
Operating Position
10.6
.417
17.2
.677
.197
5
35.8±0.5
1.409±.020
.126 max.
3.2 max.
Pretravel
Pretravel,
Max. mm inch 3.2 .126
Movement differential,
Max. mm inch 1.2 .047
Overtravel,
Min. mm inch 1.2 .047
Operating position,
mm inch 15.3
±
1.2
.602
±
.047
Simulated roller lever Pretravel
.126 max.
3.2 max.
R27.8
1.094
32.8±0.5
1.291±.020
Operating Position
.728±.047
18.5±1.2
5
.197
Pretravel,
Max. mm inch 3.2 .126
Movement differential,
Max. mm inch 1.2 .047
Overtravel,
Min. mm inch 1.2 .047
Operating position,
mm inch 18.5
±
1.2
.728
±
.047
Short roller lever
.677
20.7±0.8
.815±.031
Operating Position
R17.2
1.6 max.
.063 max.
Pretravel
.193
4.9
4.8 dia.
.189 dia.
.811±.020
20.6±0.5
Pretravel,
Max. mm inch 1.6 .063
Movement differential,
Max. mm (inch 0.5 .020
Overtravel,
Min. mm (inch 0.8 .031
Operating position,
mm inch 20.7
±
0.8
.815
±
.031
Roller lever
1.181
20.7±1.2
.815±.047
Operating Position
R30.0
3.2 max.
.126 max.
Pretravel
.193
4.9
4.8 dia.
.189 dia.
1.346±.020
34.2±0.5
Pretravel,
Max. mm inch 3.2 .126
Movement differential,
Max. mm inch 1.2 .047
Overtravel,
Min. mm (inch 1.2 .047
Operating position,
mm inch 20.7
±
1.2
.815
±
.047
2. Immersion protected type
Wire Leads
.394
.394
10
10
.122
3.1
-.002
+.010
-0.05
+0.25
Operating
14.7±0.6
Position
.579±.024
Pretravel
.063 max.
1.6 max.
10.3±0.1
.406±.004
3.4
.134
2.8
.110 .874±.004
22.2±0.1
1.417
36 300±10
11.8±.394
15.9
.626
3.1
.122-.002
+0.25
-0.05
+.010 dia.
dia.
.795±.012
20.2±0.3
Thickness of the lead wire:
Standard type: 0.75mm
2
UL/CSA approved type:
AWG #18
Color of the lead wire
COM...black
N.C. ...red
N.O. ...white
