CUSTOMER DRAWING Product Name Ident. Code S200-1-01 S2001R S200-2-01 S2002R S200-3-01 S2003R S200-4-01 S2004R S200-5-01 S2005R Product Dimensions oB oC L1.75 min min (L0.070) 16.50 1.90 2.67 (0.650) (0.075) (0.105) 16.50 2.67 3.68 (0.650) (0.105) (0.145) 16.50 4.32 5.08 (0.650) (0.170) (0.200) 19.10 5.97 6.48 (0.750) (0.235) (0.255) 19.10 6.98 7.62 (0.750) (0.275) (0.300) oD max 1.90 (0.075) 2.67 (0.105) 4.32 (0.170) 5.97 (0.235) 6.98 (0.275) Cable Dimensions oE max 2.67 (0.105) 3.68 (0.145) 5.08 (0.200) 6.48 (0.255) 7.62 (0.300) oF min 0.90 (0.035) 1.40 (0.055) 2.15 (0.085) 3.30 (0.130) 4.30 (0.170) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified fluoropolymer. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR: SOLDER: TYPE Sn96 per ANSI / J-STD-006. FLUX: TYPE ROM1 per ANSI / J-STD-004. THERMAL INDICATOR: Fusible ring. 3. MELTABLE SEALING RINGS: Environment resistant modified thermoplastic fluoropolymer. Color: light blue. 4. PRE-INSTALLED BRAID: Nickel-plated copper strands in accordance to AA59569F36N0031. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 150C minimum, meeting the dimensional criteria listed, having silver or nickel-plated shields. 2. Install using Tyco Electronics approved convection or infrared heating tools in accordance with Tyco Electronics process standard RCPS-100-71. When installed with approved convection or infrared heating tools, assemblies will meet the performance requirements of SAE AS83519. Infrared tools are not recommended for use with black cable jackets. 3. Parts shall be marked with identification code per table. 4. Temperature range: -65C to +200C. 5. For best results, prepare the cable as shown: Tyco Electronics 300 Constitution Dr Menlo Park, CA 94025, U.S.A. Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A DRAWN BY: ANGLES: N/A ROUGHNESS IN MICRON CAGE CODE: Raychem Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. REPLACES: ECO NUMBER: TITLE: SOLDERSLEEVE SHIELD TERMINATOR WITH PREINSTALLED BRAID, 200 DEG C, ROHS COMPLIANT DOCUMENT NO.: S200-X-01 REV: DATE: C1 SCALE: ECO-16-007432 P.TALLY 06090 16-011998 (c) 2005-2016 Tyco Electronics Corporation. All rights reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. 12-Aug-2016 SIZE: NTS A SHEET: 1 of 1