Nominal Voltage
Air Flow
Air Flow
Voltage Range
Noise
Sintec-Sleeve Bearings
Ball Bearings
Power Input
Nominal Speed
Temperature Range
Service Life L10
at 40 °C
Nominal Data
at tmax
Curve
Type m3/h CFM V DC V DC dB(A) Bel /Watt min-1 °C Hours Hours
4182 NGX 160 94.2 12 7...15 44 5.3 3.5 2 800 -10...+75 85 000 / 37 500 1
4182 NX 180 105.9 12 7...15 49 5.7 4.5 3 200 -30...+75 85 000 / 37 500 2
4182 NXH 237 139.5 12 7...14 59 6.5 11 4 400 -30...+55 70 000 / 50 000 2
4184 NGX 160 94.2 24 12...30 44 5.3 3.5 2 800 -10...+75 85 000 / 37 500 1
4184 NX 180 105.9 24 12...29 49 5.7 4.5 3 200 -30...+75 85 000 / 37 500 2
4184 NXH 237 139.5 24 12...25 59 6.5 11 4 400 -30...+55 70 000 / 50 000 3
4184 NXHH 250 147.1 24 12...25 60 6.7 12.2 4 900 -30...+55 70 000 / 52 500 4
4188 NXM 160 94.2 48 36...56 44 5.3 3.5 2 800 -30...+75 85 000 / 37 500 1
4112 NHH 270 158.9 12 11...13 64 7.0 15.5 5 000 -20...+50 70 000 / 55 000 5
4114 NHH 270 158.9 24 18...26.4 64 7.0 15.5 5 000 -20...+60 70 000 / 52 500 5
4118 NHH 270 158.9 48 44...52 64 7.0 15.5 5 000 -10...+55 70 000 / 52 500 5
ebm-papst • St. Georgen
DC fans with electronically commutated external rotor motor.
Fully integrated commutation electronics.
–With electronic protection against reverse polarity, blocking and overloading
by PTC-resistor; partially impedance protected.
–Metal fan housing. Impeller of fibre-glass reinforced plastic PA.
Housing with ground lug M4 for M4 x 8 screws.
–Air intake over struts. Rotational direction CW looking at rotor.
Optional Vario-Pro: Highly adaptable software configuration of the fan enables
a tailor-made solution to the specific requirements of your applications.
–Electrical connection via 2 flat pins 2,8 x 0,5 mm.
–Mass 390 g.
DC Axial Fans
Series 4100 N, Type 4182 NGX 119 x 119 x 38 mm
ebm-papst St. Georgen GmbH & Co. KG
Hermann-Papst-Straße 1 • D-78112 St. Georgen • Phone +49 (0) 77 24 / 81-0 • Fax +49 (0) 77 24 / 81-1309 • info2@de.ebmpapst.com • www.ebmpapst.com/de
Programmable fan Vario-Pro (electr. connection via leads)
ebm-papst St. Georgen GmbH & Co. KG
Hermann-Papst-Straße 1 • D-78112 St. Georgen • Phone +49 (0) 77 24 / 81-0 • Fax +49 (0) 77 24 / 81-1309 • info2@de.ebmpapst.com • www.ebmpapst.com/de
ebm-papst • St. Georgen
Sensor signal /2
Sensor signal
US Low
Condition: Isink
Sensor signal
US High
Condition: Isource
Sensor operating
voltage UBS
Perm. sink current
Isink max.
Signal data
Electrical connection
All voltages measured to ground.
External load resistance Ra from US to UBS required.
Attention:
With these fan options, deviations in regard to temperature range, voltage
range and power consumption are possible compared with standard fan data.
Signal symmetry [t1,t
2] = 0.8 … 1.2
Signal frequency [F] = 2 x n/60 Hz
Speed-proportional rectangular pulse for external speed monitoring of fan motor
–2 pulses per revolution
Open-Collector signal output
Extremely wide operating voltage range (5 ... 60 V)
Easy adaptation to user interface
Connection via separate lead
The sensor signal also serves as a major comparison variable for setting and
maintaining the desired speed for interactive or controlled cooling with one or several
interconnected fans.
Type V DC mA V DC mA V DC mA
255 N/2 0.4 230 030 2
255 H/2 0.4 230 030 2
252 N/2 0.4 230 030 2
405 F/2 0.4 1 30 0 30 2
405 F/2 H 0.4 1 30 0 30 2
412 F/2 H 0.4 1 30 0 30 2
414 F/2 0.4 1 30 0 30 2
405 /2 0.4 1 30 0 30 2
412 /2 0.4 1 30 0 30 2
414 /2 0.4 1 30 0 30 2
414 /2 H 0.4 1 30 0 30 2
412 J/2 H 0.4 1 30 0 30 4
412 J/2 HH 0.4 1 30 0 30 4
414 J/2 H 0.4 2 30 0 30 4
414 J/2 HH 0.4 2 30 0 30 4
512 F/2 0.4 1 30 0 30 2
514 F/2 0.4 1 30 0 30 2
612 F/2 0.4 1 30 0 30 2
612 F/2 H 0.4 1 30 0 30 2
614 F/2 0.4 1 30 0 30 2
612 N/2 H 0.4 1 30 0 30 2
612 N/2 NHH-120 0.4 1 30 0 30 2
612 N/2 N 0.4 1 30 0 30 2
614 N/2 H 0.4 1 30 0 30 2
614 N/2 HH-121 0.4 1 30 0 30 2
614 N/2 M 0.4 2 28 0 30 4
712 F/2 L 0.4 1 30 0 30 2
712 F/2 M 0.4 1 30 0 30 2
8412 N/2 GL 0.4 2 28 0 28 4
8412 N/2 GM 0.4 2 28 0 28 4
8412 N/2 G 0.4 2 28 0 28 4
8414 N/2 GL 0.4 2 28 0 28 4
8414 N/2 GM 0.4 2 28 0 28 4
8414 N/2 G 0.4 2 28 0 28 4
8414 N/2 0.4 2 28 0 28 4
8412 N/2 0.4 2 28 0 28 4
8412 N/2 H 0.4 2 28 0 28 4
8414 N/2 H 0.4 2 28 0 28 4
8312 /2 HL 0.4 2 30 0 30 4
8314 /2 0.4 2 30 0 30 4
8314 /2 H 0.4 2 30 0 30 4
ebm-papst St. Georgen GmbH & Co. KG
Hermann-Papst-Straße 1 • D-78112 St. Georgen • Phone +49 (0) 77 24 / 81-0 • Fax +49 (0) 77 24 / 81-1309 • info2@de.ebmpapst.com • www.ebmpapst.com/de
Type V DC mA V DC mA V DC mAType V DC mA V DC mA V DC mA
8318 /2 0.4 2 30 0 30 4
8318 /2 HL 0.4 2 30 0 30 4
8318 /2 H 0.4 2 30 0 30 4
3412 N/2 GL 0.4 2 28 0 28 4
3412 N/2 GM 0.4 2 28 0 28 4
3412 N/2 0.4 2 28 0 28 4
3412 N/2 G 0.4 2 28 0 28 4
3412 N/2 HH 0.4 2 28 0 28 4
3412 N/2 GHH 0.4 2 28 0 28 4
3412 N/2 H 0.4 2 28 0 28 4
3414 N/2 GH 0.4 2 28 0 28 4
3414 N/2 0.4 2 28 0 28 4
3312 /2 0.4 2 30 0 30 4
3318 /2 0.4 2 30 0 30 4
4412 F/2 GL 0.4 2 30 0 30 4
4412 F/2 GML 0.4 2 30 0 30 4
4412 F/2 M 0.4 2 30 0 30 4
4412 F/2 0.4 2 30 0 30 4
4414 F/2 L 0.4 2 30 0 30 4
4414 F/2 M 0.4 2 30 0 30 4
4414 F/2 G 0.4 2 30 0 30 4
4414 F/2 0.4 2 30 0 30 4
4418 F/2 0.4 2 30 0 30 4
4312 N/2 H 0.4 2 30 0 30 4
4312 N/2 HH 0.4 2 30 0 30 4
4312 /2 0.4 2 30 0 30 4
4314 /2 G 0.4 2 30 0 30 4
4314 /2 0.4 2 30 0 30 4
4318 /2 G 0.4 2 30 0 30 4
4318 /2 M 0.4 2 30 0 30 4
4318 /2 0.4 2 30 0 30 4
4212 N/2 GN 0.4 2 30 0 30 4
4212 N/2 H 0.4 2 30 0 30 4
4214 N/2 GN 0.4 2 30 0 30 4
4214 N/2 H 0.4 2 30 0 30 4
4218 N/2 GN 0.4 2 30 0 30 4
4218 N/2 H 0.4 2 30 0 30 4
4212 /2 M 0.4 2 30 0 30 4
4212 /2 0.4 2 30 0 30 4
4212 /2 H 0.4 2 30 0 30 4
4214 /2 0.4 2 30 0 4–30 4
4214 /2 H 0.4 2 30 0 4–30 4
4218 /2 0.4 2 30 0 4–30 4
4218 /2 H 0.4 2 30 0 4–30 4
4182 N/2 X 0.4 2 30 0 4–30 4
4182 N/2 GX 0.4 2 30 0 4–30 4
4184 N/2 GX 0.4 2 30 0 4–30 4
4184 N/2 X 0.4 2 30 0 4–30 4
4184 N/2 XH 0.4 2 30 0 4–30 4
5112 N/2 0.4 2 15 0 520
5114 N/2 0.4 2 60 0 60 20
5118 N/2 0.4 2 60 0 60 20
5212 N/2 H 0.4 2 30 0 4–30 2
5212 N/2 N 0.4 2 30 0 4–30 2
5214 N/2 N 0.4 2 30 0 4–30 2
5218 N/2 H 0.4 2 30 0 4–30 2
7112 N/2 0.4 2 60 0 60 20
7114 N/2 0.4 2 30 0 30 20
7118 N/2 0.4 2 60 0 60 20
6224 N/2 0.4 8 30 0 30 20
6248 N/2 0.4 8 60 0 30 20
DV 6224 /2 0.4 2 30 0 60 20
6424 /2 0.4 2 60 0 60 20
6448 /2 0.4 2 60 0 60 20
6448 /2 T 0.4 2 60 0 60 20
RL 48-19/12/2 0.4 2 28 0 4–30 4
RL 48-19/14/2 0.4 2 28 0 4–30 4
RL 90-18/12N/2 0.4 2 30 0 30 4
RL 90-18/14N/2 0.4 2 30 0 30 4
RG 90-18/12N/2 0.4 2 30 0 30 4
RG 90-18/14N/2 0.4 2 30 0 30 4
RG 125-19/14N/2 0.4 2 30 0 30 4
RG 125-19/18N/2 0.4 2 60 0 30 4
RER 125-19/14N/2 0.4 2 30 0 30 4
RG 160-28/14N/2 0.4 2 30 0 30 20
Sensor signal
US Low
Condition: Isink
Sensor signal
US High
Condition: Isource
Sensor operating
voltage UBS
Perm. sink current
Isink max.
Signal data
Sensor signal
US Low
Condition: Isink
Sensor signal
US High
Condition: Isource
Sensor operating
voltage UBS
Perm. sink current
Isink max.
Signal data
Attention:
With these fan options, deviations in regard to temperature range, voltage range
and power consumption are possible compared with standard fan data.
Available on request:
Galvanically separated sensor signal circuit
–Varying voltage potentials for power and logic circuit.