SD-200 200W Single Output DC-DC Converter series Features : 2:1 wide input range Protections: Short circuit / Overload / Over voltage / Over temperature 1500VAC I/O isolation Cooling by free air convection 100% full load burn-in test 24V and 48V input voltage design refer to LVD 2 years warranty (for SD-200C-24 type only) SPECIFICATION MODEL OUTPUT INPUT SD-200B (for D type only) SD-200C DC VOLTAGE 5V 12V 24V 48V 5V 12V 24V 48V RATED CURRENT 34A 16.7A 8.4A 4.2A 40A 16.7A 8.4A 4.2A CURRENT RANGE 0 ~ 34A 0 ~ 16.7A 0 ~ 8.4A 0 ~ 4.2A 0 ~ 40A 0 ~ 16.7A 0 ~ 8.4A 0 ~ 4.2A RATED POWER 170W 200.4W 201.6W 201.6W 200W 200.4W 201.6W 201.6W RIPPLE & NOISE (max.) Note.2 100mVp-p VOLTAGE ADJ. RANGE 4.5 ~ 5.5VDC 120mVp-p 150mVp-p 200mVp-p 100mVp-p 120mVp-p 150mVp-p 200mVp-p 11 ~ 16VDC 23 ~ 30VDC 43 ~ 53VDC 4.5 ~ 5.5VDC 11 ~ 16VDC 23 ~ 30VDC 43 ~ 53VDC VOLTAGE TOLERANCE Note.3 2.0% 1.0% 1.0% 1.0% 2.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% SETUP, RISE TIME 300ms, 50ms at full load VOLTAGE RANGE B:19 ~ 36VDC EFFICIENCY (Typ.) 79% DC CURRENT (Typ.) INRUSH CURRENT (Typ.) 10.8A/24V 10.6A/24V 10.4A/24V C:45A/48VDC D:45A/96VDC OVERLOAD 105 ~ 135% rated output power Protection type : Shut down o/p voltage, re-power on to recover PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. C:36 ~ 72VDC 82% D:72 ~144VDC 85% 86% 81% 84% 86% 86% 10.4A/24V 5.4A/48V 5.2A/48V 6.7A/48V 5A/48V 5.75 ~ 6.75V 16.8 ~ 20V 31.5 ~ 37.5V 53 ~ 65V 5.75 ~ 6.75V 16.8 ~ 20V 31.5 ~ 37.5V 53 ~ 65V Protection type : Shut down o/p voltage, re-power on to recover 95 5 (100 5 for SD-200B-12 only) TSW1 detect on main power transistor Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +60 (Refer to output load derating curve) WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION 20 ~ 90% RH non-condensing SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMI CONDUCTION & RADIATION UL60950-1approved (for SD-200C-24 type only), IEC60950-1 CB approved by TUV (for D type only) I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC EMS IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 Compliance to EN55022 (CISPR22) Class B / 70% RH Compliance to EN61000-4-2,3,4,6,8; ENV50204, light industry level, criteria A 218.2K hrs min. MIL-HDBK-217F (25 215*115*50mm (L*W*H) 1.1Kg; 12pcs/14.4Kg/0.92CUFT ) 1. All parameters NOT specially mentioned are measured at 24,48,96VDC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) File Name:SD-200-SPEC 2010-10-18 http://store.iiic.cc/ SD-200 200W Single Output DC-DC Converter series Features : 2:1 wide input range Protections: Short circuit / Overload / Over voltage / Over temperature 1500VAC I/O isolation Cooling by free air convection 100% full load burn-in test 24V and 48V input voltage design refer to LVD 2 years warranty (for D type only) SPECIFICATION MODEL OUTPUT INPUT SD-200D DC VOLTAGE 5V 12V 24V 48V RATED CURRENT 40A 16.7A 8.4A 4.2A CURRENT RANGE 0 ~ 40A 0 ~ 16.7A 0 ~ 8.4A 0 ~ 4.2A RATED POWER 200W 200.4W 201.6W 201.6W 120mVp-p 150mVp-p 200mVp-p 11 ~ 16VDC 23 ~ 30VDC 43 ~ 53VDC RIPPLE & NOISE (max.) Note.2 100mVp-p VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 2.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% 1.0% SETUP, RISE TIME 300ms, 50ms at full load VOLTAGE RANGE B:19 ~ 36VDC EFFICIENCY (Typ.) 82% DC CURRENT (Typ.) INRUSH CURRENT (Typ.) 3.5A/96V C:45A/48VDC OVERLOAD 105 ~ 135% rated output power Protection type : Shut down o/p voltage, re-power on to recover PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) DIMENSION PACKING NOTE C:36 ~ 72VDC D:72 ~144VDC 82% 3.5A/96V D:45A/96VDC 5.75 ~ 6.75V 16.8 ~ 20V Protection type : Shut down o/p voltage, re-power on to recover 85 5 84% 90% 3.5A/96V 3.5A/96V 31.5 ~ 37.5V 53 ~ 65V (TSW1) detect on main power transistor Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes IEC60950-1 CB approved by TUV (for D type only) I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B EMS IMMUNITY MTBF OTHERS 4.5 ~ 5.5VDC / 70% RH Compliance to EN61000-4-2,3,4,6,8; ENV50204, light industry level, criteria A 218.2K hrs min. MIL-HDBK-217F (25 215*115*50mm (L*W*H) 1.1Kg; 12pcs/14.4Kg/0.92CUFT ) 1. All parameters NOT specially mentioned are measured at 24,48,96VDC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) File Name:SD-200-SPEC 2010-10-18 http://store.iiic.cc/ SD-200 200W Single Output DC-DC Converter Mechanical Specification Case No. 912H series Unit:mm 117.5 32.5 27.5 19 150 177.5 LED +V ADJ. 115 95 50 32.5 37.5 50.5 4-M4 L=5mm 10 6-M3 L=3mm 16 8.3 135 9.5 9 8 7 6 5 4 3 2 1 15 215 150 32.5 Terminal Pin No. Assignment : Pin No. 1 2 3 25 50 CL 13 max. Assignment DC INPUT V+ DC INPUT VFG Assignment Pin No. 4,5,6 DC OUTPUT V7,8,9 DC OUTPUT V+ 6-M4 L=6mm Block Diagram fosc : 100KHz RECTIFIERS & FILTER EMI FILTER I/P FILTER RECTIFIERS & FILTER POWER SWITCHING +V -V FG O.V.P. O.L.P. O.T.P. DETECTION CIRCUIT PWM CONTROL Static Characteristics Derating Curve Ta=25 100 others 100 90 80 80 SD-200B,C,D-5 SD-200B-12 SD-200B-24 SD-200B-48 40 70 LOAD (%) LOAD (%) 60 20 -20 60 50 40 0 10 20 30 40 50 60 (HORIZONTAL) B:19 C:36 D:72 24 48 96 36 72 144 INPUT VOLTAGE (V) AMBIENT TEMPERATURE ( ) File Name:SD-200-SPEC 2010-10-18 http://store.iiic.cc/