SMM0102 Vishay Draloric Metal Film, Cylindrical Resistors FEATURES * Stable metal film on high quality ceramic * Low TC and tight tolerances * Excellent stability * Force fitted steel caps, tin plated on nickel barrier * Reliable solderable terminations to facilitate surface mounting STANDARD ELECTRICAL SPECIFICATIONS POWER RATING P70C1) W LIMITING ELEMENT VOLTAGE MAX2) V TEMPERATURE COEFFICIENT ppm/K TOLERANCE % RESISTANCE RANGE E-SERIES SMM0102 0.20 100 15 0.1 100R - 100K 24 - 96 SMM0102 0.20 100 25 0.1 100R - 100K 24 - 96 SMM0102 0.20 50 1.0 10R - 2M21 24 - 96 MODEL 100 Rmax = 10m Zero-Ohm-Resistor : OMM0102 1) 2) Imax = 2A * Further values and tolerances on request Power rating depends on the maximum temperature at the solder point, the component placement density and the substrate material Rated voltage: * Coating: green for TC = 50ppm/K pink TC = 25ppm/K violet TC = 15ppm/K zero ohm resistor with a black band only PxR * Marking: see appropriate catalog or web page TECHNICAL SPECIFICATIONS PARAMETER UNIT PMM0207 Rated Dissipation at 70C W 0.2 Limiting Element Voltage V 100 Insulation Voltage (1 min) V dc/ac peak > 150 Thermal Resistance K/W 250 Insulation Resistance 10 10 Category Temperature Range C - 55 / + 125 Failure Rate 10 Weight / 1000pcs -9 /h <2 g 7.8 ORDERING INFORMATION SMM0102 25 562R 0.1% B3 MODEL TC ppm / K RESISTANCE VALUE TOLERANCE % PACKAGING B3-Blistertape 3000 pcs Document Number: 20003 Revision: 20-Oct-03 For Technical questions contact: ff1aresistors@vishay.com www.vishay.com 1 SMM0102 Vishay Draloric Metal Film Cylindrical Resistors DIMENSIONS DIMENSIONS [in millimeters] MODEL SMM0102 Dmax d* L Amax Amin 1.1 D - 0.05 2.2 - 0.15 0.45 0.35 *d measured in the middle of the resistor SOLDER PAD DIMENSIONS [in millimeters] MODEL REFLOW SOLDERING WAVE SOLDERING SMM0102 a b l a b l 0.5 1.3 1.3 0.6 1.3 1.3 PERFORMANCE 1) REQUIREMENTS1) TEST CONDITIONS OF TEST Endurance Test at 70C IEC 60115-1 4.25.1 1000 hours at 70C, 1.5 hours "ON", 0.5 hours "OFF" 8000 hours at 70C, 1.5 hours "ON", 0.5 hours "OFF" 0.25% 0.5% Endurance at UCT IEC 60115-1 4.25.3 1000 hours at 125C without load 0.5% Overload Test IEC 60115-1 4.13 Short time overload for 2 seconds at 6.25 x rated power 0.1% Thermal Shock IEC 60115-1 4.19, IEC 60068-2-14 Rapid change between upper and lower category temperature 0.1% Damp Heat Steady State IEC 60115-1 4.24, IEC 60068-2-3 56 days at 40C and 93% relative humidity 0.5% Resistance to Soldering Heat IEC 60115-1 4.18, IEC 60068-2-20 10 seconds at 260C solder bath temperature 0.1% For a resistance range from 10 to 1M PACKAGING REEL BULK BULK FEEDING MAGAZINE MODEL TAPE WIDTH SMM0102 OMM0102 8mm Blistertape DIAMETER 180mm 180mm 330mm PIECES / REEL 1000 3000 10000 CODE PIECES/MAGAZIN E CODE 8000 M8 B1* B3 B0 * For further information about packaging see appropriate catalog or web page *For TC25 and Tol. 0.5% only www.vishay.com 2 For Technical questions contact: ff1aresistors@vishay.com Document Number: 20003 Revision: 20-Oct-03 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1