PT100 RTD Evaluation Board User's Guide (c) 2007 Microchip Technology Inc. DS51607B Note the following details of the code protection feature on Microchip devices: * Microchip products meet the specification contained in their particular Microchip Data Sheet. * Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. * There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip's Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. * Microchip is willing to work with the customer who is concerned about the integrity of their code. * Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as "unbreakable." Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip's code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights. AmpLab, FilterLab, Linear Active Thermistor, Migratable Memory, MXDEV, MXLAB, SEEVAL, SmartSensor and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. Analog-for-the-Digital Age, Application Maestro, CodeGuard, dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, FlexROM, fuzzyLAB, In-Circuit Serial Programming, ICSP, ICEPIC, Mindi, MiWi, MPASM, MPLAB Certified logo, MPLIB, MPLINK, PICkit, PICDEM, PICDEM.net, PICLAB, PICtail, PowerCal, PowerInfo, PowerMate, PowerTool, REAL ICE, rfLAB, Select Mode, Smart Serial, SmartTel, Total Endurance, UNI/O, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. Trademarks The Microchip name and logo, the Microchip logo, Accuron, dsPIC, KEELOQ, KEELOQ logo, microID, MPLAB, PIC, PICmicro, PICSTART, PRO MATE, rfPIC and SmartShunt are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. (c) 2007, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper. Microchip received ISO/TS-16949:2002 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company's quality system processes and procedures are for its PIC(R) MCUs and dsPIC(R) DSCs, KEELOQ(R) code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip's quality system for the design and manufacture of development systems is ISO 9001:2000 certified. DS51607B-page ii (c) 2007 Microchip Technology Inc. PT100 RTD EVALUATION BOARD USER'S GUIDE Table of Contents Preface ........................................................................................................................... 1 Introduction............................................................................................................ 1 Document Layout .................................................................................................. 1 Conventions Used in this Guide ............................................................................ 2 Recommended Reading........................................................................................ 3 The Microchip Web Site ........................................................................................ 3 Customer Support ................................................................................................. 4 Document Revision History ................................................................................... 4 Chapter 1. Product Overview ....................................................................................... 5 1.1 Introduction ..................................................................................................... 5 1.2 What is the PT100 RTD Evaluation Board? ................................................... 5 1.3 What the PT100 RTD Evaluation Board Kit Includes ..................................... 5 Chapter 2. Installation and Operation ......................................................................... 7 2.1 Introduction ..................................................................................................... 7 2.2 Features ......................................................................................................... 7 2.3 Getting Started ............................................................................................... 8 2.4 Functional Description .................................................................................. 10 Appendix A. Schematic and Layouts ........................................................................ 13 A.1 Introduction .................................................................................................. 13 A.2 Board Schematic - Page 1 ........................................................................ 14 A.3 Board Schematic - Page 2 ........................................................................ 15 A.4 Board - Top Silk-screen Layer ................................................................... 16 A.5 Board - Top Layer ...................................................................................... 16 A.6 Board - Bottom Silk .................................................................................. 17 A.7 Board - Bottom Layer ................................................................................. 17 Appendix B. Bill Of Materials (BOM) ......................................................................... 19 Worldwide Sales and Service .................................................................................... 22 (c) 2007 Microchip Technology Inc. DS51607B-page iii PT100 RTD Evaluation Board User's Guide NOTES: DS51607B-page iv (c) 2007 Microchip Technology Inc. PT100 RTD EVALUATION BOARD USER'S GUIDE Preface NOTICE TO CUSTOMERS All documentation becomes dated, and this manual is no exception. Microchip tools and documentation are constantly evolving to meet customer needs, so some actual dialogs and/or tool descriptions may differ from those in this document. Please refer to our web site (www.microchip.com) to obtain the latest documentation available. Documents are identified with a "DS" number. This number is located on the bottom of each page, in front of the page number. The numbering convention for the DS number is "DSXXXXXA", where "XXXXX" is the document number and "A" is the revision level of the document. For the most up-to-date information on development tools, see the MPLAB(R) IDE on-line help. Select the Help menu, and then Topics to open a list of available on-line help files. INTRODUCTION This chapter contains general information that will be useful to know before using the PT100 RTD Evaluation Board. Items discussed in this chapter include: * * * * * * Document Layout Conventions Used in this Guide Recommended Reading The Microchip Web Site Customer Support Document Revision History DOCUMENT LAYOUT This document describes how to use the PT100 RTD Evaluation Board as a development tool. The manual layout is as follows: * Chapter 1. "Product Overview" - Important information about the PT100 RTD Evaluation Board. * Chapter 2. "Installation and Operation" - This chapter includes a detailed description of each function of the demo board and instructions for how to begin using the board. * Appendix A. "Schematic and Layouts" - Shows the schematic and layout diagrams for the PT100 RTD Evaluation Board. * Appendix B. "Bill Of Materials (BOM)" - Lists the parts used to build the PT100 RTD Evaluation Board. (c) 2007 Microchip Technology Inc. DS51607B-page 1 PT100 RTD Evaluation Board User's Guide CONVENTIONS USED IN THIS GUIDE This manual uses the following documentation conventions: DOCUMENTATION CONVENTIONS Description Arial font: Italic characters Represents Referenced books Emphasized text A window A dialog A menu selection A field name in a window or dialog A menu path MPLAB(R) IDE User's Guide ...is the only compiler... the Output window the Settings dialog select Enable Programmer "Save project before build" A dialog button A tab A number in verilog format, where N is the total number of digits, R is the radix and n is a digit. A key on the keyboard Click OK Click the Power tab 4`b0010, 2`hF1 Italic Courier New Sample source code Filenames File paths Keywords Command-line options Bit values Constants A variable argument Square brackets [ ] Optional arguments Curly brackets and pipe character: { | } Ellipses... Choice of mutually exclusive arguments; an OR selection Replaces repeated text #define START autoexec.bat c:\mcc18\h _asm, _endasm, static -Opa+, -Opa0, 1 0xFF, `A' file.o, where file can be any valid filename mcc18 [options] file [options] errorlevel {0|1} Initial caps Quotes Underlined, italic text with right angle bracket Bold characters N`Rnnnn Text in angle brackets < > Courier New font: Plain Courier New Represents code supplied by user DS51607B-page 2 Examples File>Save Press <Enter>, <F1> var_name [, var_name...] void main (void) { ... } (c) 2007 Microchip Technology Inc. Preface RECOMMENDED READING This user's guide describes how to use the PT100 RTD Evaluation Board. The following Microchip documents are available on our web site (www.microchip.com) and recommended as supplemental reference resources. MCP6S26 Data Sheet, "Single-Ended, Rail-toRail I/O, Low Gain PGA" (DS21117) This data sheet provides detailed information regarding the MCP6S26 device. MCP3301 Data Sheet, "13-Bit Differential Input, Low Power A/D Converter w/SPI Serial Interface" (DS21700) This data sheet provides detailed information regarding the MCP3301 device. MCP602X Data Sheet, "Rail-to-Rail Input/Output, 10 MHz Op Amps" (DS21685) This data sheet provides detailed information regarding the MCP602X devices. MCP41010 Data Sheet, "Single/Dual Digital Potentiometer with SPI Interface" (DS11195) This data sheet provides detailed information regarding the MCP41XXX devices. PIC18F2455/2550/4455/4550 Data Sheet, "28/40/44-Pin, High-Performance, Enhanced Flash, USB Microcontrollers with nanoWatt Technology" (DS39632) This data sheet provides detailed information regarding the PIC18F2455/2550/4455/4550 devices. TC1070/TC1071/TC1187 Data Sheet, "50 mA, 100 mA, and 150 mA Adjustable CMOS LDOs w/Shutdown" (DS21353) This data sheet provides detailed information regarding the TC1070/TC1071/TC1187 devices. THE MICROCHIP WEB SITE Microchip provides online support via our web site at www.microchip.com. This web site is used as a means to make files and information easily available to customers. Accessible by using your favorite internet browser, the web site contains the following information: * Product Support - Data sheets and errata, application notes and sample programs, design resources, user's guides and hardware support documents, latest software releases and archived software * General Technical Support - Frequently Asked Questions (FAQs), technical support requests, online discussion groups, Microchip consultant program member listing * Business of Microchip - Product selector and ordering guides, latest Microchip press releases, listing of seminars and events, listings of Microchip sales offices, distributors and factory representatives (c) 2007 Microchip Technology Inc. DS51607B-page 3 PT100 RTD Evaluation Board User's Guide CUSTOMER SUPPORT Users of Microchip products can receive assistance through several channels: * * * * * Distributor or Representative Local Sales Office Field Application Engineer (FAE) Technical Support Development Systems Information Line Customers should contact their distributor, representative or field application engineer for support. Local sales offices are also available to help customers. A listing of sales offices and locations is included in the back of this document. Technical support is available through the web site at: http://support.microchip.com DOCUMENT REVISION HISTORY Revision B (December 2007) * * * * Changed Information Related to the GUI. Updated Figure 2-3 and Figure 2-6. Updated Section 2.3.2 "Software Setup". Add disclaimer to Bill of Materials regarding RoHS-Compliant part numbers. Revision A (May 2006) * Initial Release of this Document. DS51607B-page 4 (c) 2007 Microchip Technology Inc. PT100 RTD EVALUATION BOARD USER'S GUIDE Chapter 1. Product Overview 1.1 INTRODUCTION This chapter provides an overview of the PT100 RTD Evaluation Board and covers the following topics: * What is the PT100 RTD Evaluation Board? * What the PT100 RTD Evaluation Board kit includes. 1.2 WHAT IS THE PT100 RTD EVALUATION BOARD? The PT100 RTD Evaluation Board demonstrates how to bias a Resistive Temperature Detector (RTD) and accurately measure temperature. Up to two RTDs can be connected. The RTDs are biased using constant current source and the output voltage is scaled using a difference amplifier. In addition to the difference amplifier, a multiple input channel Programmable Gain Amplifier (PGA) MCP6S26 is used to digitally switch between RTDs and increase the scale up to 32 times. The output of the difference amplifier is connected to a 12-bit differential Analog-to-Digital Converter (ADC) MCP3301. The ADC outputs serial data to the PIC18F2550 using a Serial Peripheral Interface (SPI). The data is transmitted to a PC using a USB interface. A PC Software Graphical User Interface (GUI) is used to acquire the data. The acquired data is graphed as a real-time stripchart display. In addition, the user can select input channels, acquisition interval, and stripchart display buffer size. 1.3 WHAT THE PT100 RTD EVALUATION BOARD KIT INCLUDES This PT100 RTD Evaluation Board Kit includes: * * * * The PT100 RTD Evaluation Board (102-00096) PIC18F2550 Firmware (USB) PC Software GUI Analog and Interface Products Demonstration Boards CD-ROM (DS21912) - PT100 RTD Evaluation Board User's Guide (DS51607) * Mini-USB Cable (c) 2007 Microchip Technology Inc. DS51607B-page 5 PT100 RTD Evaluation Board User's Guide NOTES: DS51607B-page 6 (c) 2007 Microchip Technology Inc. PT100 RTD EVALUATION BOARD USER'S GUIDE Chapter 2. Installation and Operation 2.1 INTRODUCTION The PT100 RTD Evaluation Board allows the user to evaluate Microchip's solution to accurately measure temperature using RTD. When biasing RTDs to measure temperature, self-heat due to power dissipation has to be considered. RTD resistance availability typically ranges from 100 to 5,000. In order to measure the output voltage across the RTD over a wide temperature range, the biasing current has to be relatively high. This higher current causes more power dissipation through heat and skews the temperature reading. Microchip's solution to this challenge is to use the MCP6S26 Programmable Gain Amplifier (PGA) to increase the sensor dynamic output range and increase measurement resolution while significantly reducing the biasing current magnitude. This board consists of a surface mount RTD to measure the PCB temperature and an external RTD connector. In addition, the user can connect and measure an external leaded RTD (2, 3, or 4-Wire) and configure the corresponding jumper to remotely measure temperature. The multiple input channel PGA adds gain programmability into the analog circuit. The multiple input channels are used to switch between RTDs and the gain is used to increase the sensor dynamic range. The PGA output is connected to a differential amplifier circuit which allows the user to scale the sensor output. The differential output is digitized using an MCP3301 12-bit differential analog-to-digital converter. The data is transmitted to the PC using the USB interface. A PC Software Graphical User Interface (GUI) is used to obtain and display the data in real-time. 2.2 FEATURES The PT100 RTD Evaluation Board has the following features: * * * * * * * * A surface mount PT100 RTD External (2, 3, or 4-wire) RTD connector Gain and input channel programmability using MCP6S26 PGA MCP3301 12-Bit + sign ADC MCP41010 10 k Digital Potentiometer PIC18F2550 PICmicro(R) Microcontroller USB interface to PC PC Software GUI (c) 2007 Microchip Technology Inc. DS51607B-page 7 PT100 RTD Evaluation Board User's Guide 2.3 GETTING STARTED This section describes how to quickly configure the PT100 RTD Evaluation Board. A simplified block diagram of the configuration is provided in Figure 2-1. PT100 RTD Evaluation Board PICmicro(R) Microcontroller CH0 USB PC FIGURE 2-1: RTD ADC Diff Amp CH1 RTD VREF PT100 RTD Evaluation Board Simplified Block Diagram. 2.3.1 Hardware Setup 1. Connect the USB cable to PC. 2. To measure PCB temperature, connect JP1 to Local RTD position and JP2 to RTD position. VDD VDD SPI SPI SPI CH0 3 CH1 PIC18F2550 SPI SPI 3 FIGURE 2-2: DS51607B-page 8 + + - - 3 3 3 PGA RTDs MCP6S26 VREF ADC MCP3301 JP1 Differential Amplifier Simplified PT100 RTD Evaluation Board Schematic. (c) 2007 Microchip Technology Inc. Installation and Operation 2.3.2 Software Setup 1. Once the USB connection is secure, start the PT100RTD ThermalManagement.EXE file and select Enable Macro. When the software starts, the Configuration window will be displayed, as shown in Figure 2-3. FIGURE 2-3: PC Software GUI. 2. Select Enable/Disable for CH0 or CH1 (Channel 0 and Channel 1, respectively). 3. Select PGA gain, ADC sampling rate, and sampling buffer size for the stripchart display. 4. Use the scroll bar to adjust the differential amplifier gain and Remote or Local RTD bias currents. 5. Click start to start acquisition, stop to stop acquisition. Reset to Clear buffer. 6. Adjust the digital potentiometer positions to select the differential amplifier gain and trim the current sources for the local and external RTDs. 7. Double-click the chart. The Chart Configuration window will be displayed. (c) 2007 Microchip Technology Inc. DS51607B-page 9 PT100 RTD Evaluation Board User's Guide 2.4 FUNCTIONAL DESCRIPTION 2.4.1 The PT100 RTD Evaluation Board The PT100 RTD Evaluation Board uses surface mount RTD to measure temperature. An external 2, 3, or 4-wire PT100 RTD can also be connected to measure temperature in remote locations. The RTDs are biased using a constant current source. In order to reduce self-heat due to power dissipation, the current magnitude is relatively low. The small voltage across the RTD is amplified using the MCP6S26 PGA. The PGA allows the user to digitally program the amplifier gain and increase the sensor output range. The output of the PGA is scaled using a differential amplifier. The differential amplifier drives a 12-Bit + sign differential ADC, MCP3301. The digital data is read using PIC18F2550 and transmitted to PC using a USB interface. 2.4.1.1 THE RTD BIASING CONSTANT CURRENT SOURCE The constant current source uses a reference voltage, one amplifier, and a PNP transistor, as shown in Figure 2-4. VDD 7 k SPI 10 k Digital Potentiometer 3 PNP Transistor VREF MCP6022 RTD (100 @C) 1 k FIGURE 2-4: Constant Current Source. The amplifier maintains constant voltage at the transistor emitter terminal. Therefore, the emitter and collector currents are constant. The collector current biases the RTD. The biasing current can be fine tuned by adjusting the 10 k digital potentiometer using the GUI. A 100, 0.1% resistor is available for system calibration at 0C (RTD resistance at 0C is 100). This resistor can be jumped using JP1. When connecting an external PT100 RTD, connect JP2 to External Position. RWIRE RWIRE LWIRE 2-wire RTD DS51607B-page 10 LWIRE RTD RTD FIGURE 2-5: RWIRE LWIRE 3-wire RTD RTD 4-wire RTD External RTD Connections. (c) 2007 Microchip Technology Inc. Installation and Operation 2.4.1.2 RTD SIGNAL CHAIN The PGA is used to amplify the small voltage across the RTD. The reference input pin of the PGA is connected to the RTD negative terminal and Channel 0 and Channel 1 are connected to the positive terminals of each RTD. This allows only the voltage across the sensor to be amplified. The PGA has a gain error of 1% (max.) for gains greater than 1 V/V. Refer to the datasheet (DS21685) for details. The RTD negative terminal and the PGA output are connected to the differential amplifier. The differential amplifier scales the PGA output. The difference amplifier gain is shown in Equation 2-1. EQUATION 2-1: DIFFERENCE AMPLIFIER GAIN 2 x RF G = 1 + ------------------------- R G + 20 Where: RF = 10 k RG = 10 k Digital Potentiometer 2.4.1.3 THE GRAPHICAL USER INTERFACE The GUI uses the USB port to communicate with the PIC18F2550. FIGURE 2-6: Hardware Status When start is clicked, the macro double checks hardware availability before starting the acquisition. All user options such as Sampling time, Stripchart buffer size, Digi. Pot Positions, or PGA Chn/Gain setup can be changed during acquisition. (c) 2007 Microchip Technology Inc. DS51607B-page 11 PT100 RTD Evaluation Board User's Guide NOTES: DS51607B-page 12 (c) 2007 Microchip Technology Inc. PT100 RTD EVALUATION BOARD USER'S GUIDE Appendix A. Schematic and Layouts A.1 INTRODUCTION This appendix contains the following schematics and layouts for the PT100 RTD Evaluation Board: * * * * Board Schematic Board - Top Layer Board - Silk-screen Layer Board - Bottom Layer (c) 2007 Microchip Technology Inc. DS51607B-page 13 PT100 RTD Evaluation Board User's Guide BOARD SCHEMATIC - PAGE 1 DS51607B-page 14 1 2 M A.2 (c) 2007 Microchip Technology Inc. Schematic and Layouts BOARD SCHEMATIC - PAGE 2 M A.3 (c) 2007 Microchip Technology Inc. DS51607B-page 15 PT100 RTD Evaluation Board User's Guide BOARD - TOP SILK-SCREEN LAYER : A.4 BOARD EDGE A.5 BOARD - TOP LAYER DS51607B-page 16 (c) 2007 Microchip Technology Inc. Schematic and Layouts BOARD - BOTTOM SILK A.7 BOARD - BOTTOM LAYER : A.6 BOARD EDGE (c) 2007 Microchip Technology Inc. DS51607B-page 17 PT100 RTD Evaluation Board User's Guide NOTES: DS51607B-page 18 (c) 2007 Microchip Technology Inc. PT100 RTD EVALUATION BOARD USER'S GUIDE Appendix B. Bill Of Materials (BOM) TABLE B-1: Qty BILL OF MATERIALS Reference Description Manufacturer (R) Part Number 10 C1, C2, C3, C4, CAP 1.0UF 10V CERAMIC X7R C5, C6, C12, 0805 C14, C15, C16 Kemet Electronics C0805C105K8RACTU 2 C7, C8 CAP 22PF 50V CERM CHIP 0805 SMD Panasonic(R) - ECG ECJ-2VC1H220J 1 C9 CAP CER 4700PF 100V X7R 10% 0805 TDK(R) Corporation C2012X7R2A472K 6 C10, C11, C18, CAP .1UF 25V CERAMIC X7R 0805 Panasonic - ECG C21, C26, C27 1 C13 10uF/16V CAP-SMT-ELCTRO Value-Pro SE10/16 1 D1 DIODE ZENER 4.3V 150MW S-MINI 2P Panasonic - SSG MAZ80430ML 1 D2 MA3X786E0LCT-ND Panasonic - SSG MA3X786E0L 0 J1 Do Not Populated Header - - 1 J2 CONN RECEPT MINI USB2.0 5POS Hirose Electronic Co Ltd 1 J2 USB A Male to Mini USB B 5 pin Cable - 3ft phone:(316)522-2002 http://www.store.yahoo.com sales@ktusasys.com /ktusasys/ usbtomib 5pin .html 1 J4 CONN TERM BLOCK 4POS 5MM PCB Phoenix Contact 1729034 2 JMP1, JMP2 3PIN, .100" Straight Male Headers (Gold) Value-Pro 7000-1X3SG-R 1 PCB RoHS Compliant Bare PCB, PT100 RTD Evaluation Board - 104-00096 2 Q1, Q2 IC AMP GP PNP 60V 0.8A SOT23 Fairchild Semiconductor(R) BSR16 2 R1, R2 RES 100 OHM 1/8W 1% 0805 SMD Panasonic - ECG ERJ-6ENF1000V 1 R3 RES 20.0 OHM 1/8W 1% 0805 SMD Panasonic - ECG ERJ-6ENF20R0V 1 R4 RES 100 OHM 1/10W 0.1% 0805 SMD RR1220P-101-B-T5 2 R5, R6 ES 7.15K OHM 1/8W 1% 0805 SMD Panasonic - ECG ERJ-6ENF7151V 7 R7, R8, R12, R14, R16, R17, R24 RES 4.99K OHM 1/8W 1% 0805 SMD Panasonic - ECG ERJ-6ENF4991V 2 R9, R10 RES 10.0K OHM 1/8W 1% 0805 SMD Panasonic - ECG ERJ-6ENF1002V 1 R11 RES 1.80M OHM 1/8W 1% 0805 SMD Yageo(R) America RC0805FR-071M8L 1 R13 PLATINUM RTD CHIP TEMPERATURE SENSOR SMD ENERCORP enercorp.com Model: PCS 1.1503.1 Note: Susumu Co Ltd ECJ-2VB1E104K UX60-MB-5ST The components listed in this Bill of Materials are representative of the PCB assembly. The released BOM used in manufacturing uses all RoHS-compliant components. (c) 2007 Microchip Technology Inc. DS51607B-page 19 Bill Of Materials (BOM) TABLE B-1: Qty BILL OF MATERIALS (CONTINUED) Reference Description Manufacturer Part Number 1 R15 RES 35.7K OHM 1/8W 1% 0805 SMD Panasonic - ECG ERJ-6ENF3572V 3 R18, R22, R23 RES 1.00K OHM 1/10W 1% 0805 SMD Panasonic - ECG ERJ-6ENF1001V 2 R19, R21 RES 10.0 OHM 1/8W 1% 0805 SMD Panasonic - ECG ERJ-6ENF10R0V 1 R20 RES 619K OHM 1/8W 1% 0805 SMD Panasonic - ECG ERJ-6ENF6193V 20 TP1<->TP20 TEST POINT PC COMPACT SMT Keystone Electronics(R) 5016 1 U1 Single-Ended, Rail-to-Rail I/O, Low Gain PGA Microchip Technology Inc. MCP6S26T-I/SL 1 U2 1 Mhz. Low Power Op-Amp Microchip Technology Inc. MCP6002-I/SN 1 U3 Rail-to-Rail Input/Output, 10 MHz Op Microchip Technology Inc. Amps MCP6024-I/SL 1 U4 28/40/44-Pin, High-Performance, Enhanced Flash, USB microcontrollers with nanoWatt Technology Microchip Technology Inc. PIC18F2550-I/SO 1 U5 13-Bit Differential Input, Low-Power A/D Converter with SPI Serial Interface Microchip Technology Inc. MCP3301-BI/SN 1 U6 50mA, 100mA and 150mA Adjustable CMOS LDOs with Shutdown Microchip Technology Inc. TC1071VCT 3 U8,U9,U10 Single/Dual Digital Potentiometer with SPI Interface Microchip Technology Inc. MCP41010-I/SN Y1 CRYSTAL 20.0000 MHZ 18PF SMD Citizen America Corp. 1 Note: CS20-20.000MABJ-UT The components listed in this Bill of Materials are representative of the PCB assembly. The released BOM used in manufacturing uses all RoHS-compliant components. (c) 2007 Microchip Technology Inc. DS51607B-page 20 Bill Of Materials (BOM) NOTES: (c) 2007 Microchip Technology Inc. DS51607B-page 21 WORLDWIDE SALES AND SERVICE AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: http://support.microchip.com Web Address: www.microchip.com Asia Pacific Office Suites 3707-14, 37th Floor Tower 6, The Gateway Harbour City, Kowloon Hong Kong Tel: 852-2401-1200 Fax: 852-2401-3431 India - Bangalore Tel: 91-80-4182-8400 Fax: 91-80-4182-8422 India - New Delhi Tel: 91-11-4160-8631 Fax: 91-11-4160-8632 Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 India - Pune Tel: 91-20-2566-1512 Fax: 91-20-2566-1513 France - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Japan - Yokohama Tel: 81-45-471- 6166 Fax: 81-45-471-6122 Germany - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Atlanta Duluth, GA Tel: 678-957-9614 Fax: 678-957-1455 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Farmington Hills, MI Tel: 248-538-2250 Fax: 248-538-2260 Kokomo Kokomo, IN Tel: 765-864-8360 Fax: 765-864-8387 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 Santa Clara Santa Clara, CA Tel: 408-961-6444 Fax: 408-961-6445 Toronto Mississauga, Ontario, Canada Tel: 905-673-0699 Fax: 905-673-6509 Australia - Sydney Tel: 61-2-9868-6733 Fax: 61-2-9868-6755 China - Beijing Tel: 86-10-8528-2100 Fax: 86-10-8528-2104 China - Chengdu Tel: 86-28-8665-5511 Fax: 86-28-8665-7889 Korea - Daegu Tel: 82-53-744-4301 Fax: 82-53-744-4302 China - Fuzhou Tel: 86-591-8750-3506 Fax: 86-591-8750-3521 Korea - Seoul Tel: 82-2-554-7200 Fax: 82-2-558-5932 or 82-2-558-5934 China - Hong Kong SAR Tel: 852-2401-1200 Fax: 852-2401-3431 Malaysia - Kuala Lumpur Tel: 60-3-6201-9857 Fax: 60-3-6201-9859 China - Nanjing Tel: 86-25-8473-2460 Fax: 86-25-8473-2470 Malaysia - Penang Tel: 60-4-227-8870 Fax: 60-4-227-4068 China - Qingdao Tel: 86-532-8502-7355 Fax: 86-532-8502-7205 Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 China - Shanghai Tel: 86-21-5407-5533 Fax: 86-21-5407-5066 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 China - Shenyang Tel: 86-24-2334-2829 Fax: 86-24-2334-2393 Taiwan - Hsin Chu Tel: 886-3-572-9526 Fax: 886-3-572-6459 China - Shenzhen Tel: 86-755-8203-2660 Fax: 86-755-8203-1760 Taiwan - Kaohsiung Tel: 886-7-536-4818 Fax: 886-7-536-4803 China - Shunde Tel: 86-757-2839-5507 Fax: 86-757-2839-5571 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 China - Wuhan Tel: 86-27-5980-5300 Fax: 86-27-5980-5118 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781 Netherlands - Drunen Tel: 31-416-690399 Fax: 31-416-690340 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 UK - Wokingham Tel: 44-118-921-5869 Fax: 44-118-921-5820 China - Xian Tel: 86-29-8833-7252 Fax: 86-29-8833-7256 10/05/07 DS51607B-page 22 (c) 2007 Microchip Technology Inc.