Balanced, OrthoQuad (R) Applications * Down Converters * Demodulators * Pulse Modulators * Current Controlled Attenuators * Phase, Frequency Discriminators Features Electrical Specifications * Military Grade * Good LO/RF Isolation * Connectors Per MIL-C-39012 * Low Conversion Loss * Good Intermodulation Performance * Good LO/RF VSWR Frequency Isolation LO-RF Convers. Loss VSWR RF, LO GHz dB Min/Typ dB Max/Typ Max/Typ :1 1.0 - 2.0 20/30 8.0/6.5 1.5/1.2 Noise Fig.1 Aluminum Cased Connectorized Components Model 7A0125 Mixers IF Freq.2 dB Max MHz 8.5/7.5 DC-150 Note: Impedance: 50 ohms nominal. Operating temperature -54 to +95C. LO drive of +8 dBm. All measurements are made in 50 ohm system. For biased models, conversion loss and noise figures specify @ 0 dBm LO power. Mixers have internal bias networks that allow operation over LO dynamic range 20 db while maintaining optimum conversion loss. Electrical and Mechanical Specifications subject to change without notice. Outline Drawing 1Noise figure is single sideband using a 30 MHz amplifier having a noise of 1.5 dB. 2 Upper IF frequency is the 3dB response point. NOTES: 1. FINISH: EPOXY PRIMER BLUE EPOXY PAINT 2. MARKING APPROXIMATELY AS SHOWN PER MIL-STD-130 3. DIMENSIONS ARE IN INCHES Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121 Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369 6.6.13