Vishay Semiconductors
TLHF4600, TLHF4601
Document Number 83134
Rev. 1.8, 05-May-11
www.vishay.com
1
For technical support, please contact: LED@vishay.com
This document is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
High Intensity LED in Ø 3 mm Tinted Diffused Package
DESCRIPTION
This device has been designed to meet the increasing
demand for AlInGaP technology general indicating and
lighting purposes.
It is housed in a 3 mm diffused plastic package. The
wide viewing angle of these devices provides a high
brightness.
All packing units are categorized in luminous intensity
and color groups. That allows users to assemble LEDs
with uniform appearance.
PRODUCT GROUP AND PACKAGE DATA
• Product group: LED
• Package: 3 mm
• Product series: standard
• Angle of half intensity: ± 60°
FEATURES
• AlInGaP technology
• Standard Ø 3 mm (T-1) package
• Small mechanical tolerances
• Suitable for DC and high peak current
• Wide viewing angle
• Very high intensity
• Luminous intensity color categorized
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
APPLICATIONS
• Status lights
• Off/on indicator
• Background illumination
• Readout lights
• Maintenance lights
• Legend light
** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902
19222
PARTS TABLE
PART COLOR, LUMINOUS INTENSITY TECHNOLOGY
TLHF4600 Soft Orange, IV > 10 mcd AllnGaP on GaAs
TLHF4601 Soft Orange, IV = (40 to 125) mcd AllnGaP on GaAs
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Reverse voltage VR5V
DC forward current Tamb 60 °C IF30 mA
Surge forward current tp 10 sI
FSM 0.1 A
Power dissipation Tamb 60 °C PV80 mW
Junction temperature Tj100 °C
Operating temperature range Tamb - 40 to + 100 °C
Storage temperature range Tstg - 55 to + 100 °C
Soldering temperature t 5 s, 2 mm from body Tsd 260 °C
Thermal resistance junction/
ambient RthJA 400 K/W
www.vishay.com
2
Document Number 83134
Rev. 1.8, 05-May-11
Vishay Semiconductors
TLHF4600, TLHF4601
For technical support, please contact: LED@vishay.com
This document is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note:
1) In one packing unit IVmin./IVmax. 0.5
Note:
Luminous intensity is tested at a current pulse duration of 25 ms.
The above type numbers represent the order groups which include
only a few brightness groups. Only one group will be shipped on each
bag (there will be no mixing of two groups on each bag).
In order to ensure availability, single brightness groups will not be
orderable.
In a similar manner for colors where wavelength groups are measured
and binned, single wavelength groups will be shipped on any one bag.
In order to ensure availability, single wavelength groups will not be
orderable.
Note:
Wavelengths are tested at a current pulse duration of 25 ms.
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
SOFT ORANGE
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity 1) IF = 10 mA TLHF4600 IV10 26 mcd
TLHF4601 IV40 125 mcd
Dominant wavelength IF = 10 mA TLHF4600 d598 605 611 nm
TLHF4601 d602 609 nm
Peak wavelength IF = 10 mA p610 nm
Angle of half intensity IF = 10 mA ± 60 deg
Forward voltage IF = 20 mA VF2.0 2.6 V
Reverse voltage IR = 10 AV
R5V
Junction capacitance VR = 0, f = 1 MHz Cj15 pF
LUMINOUS INTENSITY CLASSIFICATION
GROUP LIGHT INTENSITY (mcd)
STANDARD MIN. MAX.
R10 20
S16 32
T25 50
U40 80
V63 125
W100 200
X130 260
Y180 360
Z240 480
COLOR CLASSIFICATION
GROUP
YELLOW
DOM. WAVELENGTH (nm)
MIN. MAX.
1598 601
2600 603
3602 605
4604 607
5606 609
6608 611
Document Number 83134
Rev. 1.8, 05-May-11
www.vishay.com
3
Vishay Semiconductors
TLHF4600, TLHF4601
For technical support, please contact: LED@vishay.com
This document is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Figure 1. Forward Current vs. Ambient Temperature for InGaN
Figure 2. Rel. Luminous Intensity vs. Angular Displacement
Figure 3. Forward Current vs. Forward Voltage
0
10
20
30
40
60
95 10894
50
I - Forward Current (mA)
F
T
amb
- Ambient Temperature (°C)
100806040200
0.4 0.2 0
95 10043
0.6
0.9
0.8
0°
30°
10° 20°
40°
50°
60°
70°
80°
0.7
1.0
I - RelativeLuminous Intensity
vrel
ϕ - Angular Displacement
1
10
100
1 1.5 2 2.5 3
V
F
- Forward Voltage (V)
95 10878
I
F
- Forward Current (mA)
Figure 4. Rel. Luminous Intensity vs. Ambient Temperature
Figure 5. Relative Luminous Intensity vs. Forward Current
Figure 6. Relative Intensity vs. Wavelength
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0 102030405060708090100
Tamb - Ambient Temperature (°C)
95 10880
IV rel - Relative Luminous Intensity
IF = 20 mA
0.01
0.1
1
10
110100
I
F
- Forward Current (mA)
96 11588
I
V rel
- Relative Luminous Intensity
0.0
0.2
0.4
0.6
0.8
1.0
1.2
560 580 600 620 640 660
λ- Wavelength (nm)95 10885
soft orange
I - Relative Intensity
rel
www.vishay.com
4
Document Number 83134
Rev. 1.8, 05-May-11
Vishay Semiconductors
TLHF4600, TLHF4601
For technical support, please contact: LED@vishay.com
This document is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE DIMENSIONS in millimeters
Ø 3.2 ± 0.15
Ø 2.9 ± 0.15
0.4 + 0.15
- 0.05
< 0.6
3.5 ± 0.1
4.5 ± 0.3
5.8± 0.3
30.3 ± 0.5
1.5 ± 0.25
0.6 ± 0.15
2.54 nom.
Drawing-No.: 6.544-5255.01-4
Issue: 7; 25.09.08
95 10913
specifications
according to DIN
technical drawings
AC
Area not plane
(2.5)
R 1.4 (sphere)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
