https://www.phoenixcontact.com/us/products/2904089
09/06/2016Page1/6
Signal isolator-MACX MCR-SL-RPSS-2I-2I-2904089
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
2-channel repeater power supply for operating 2-wire measuring transducers, input: 4…20 mA (powered), output:
4…20 mA (active), bidirectional transmission of digital HART communication signals, with screw connection
Key Commercial Data
Packing unit 1 STK
Weight per Piece (excluding packing) 160.000 g
Custom tariff number 85437090
Country of origin Germany
Technical data
Note
Utilization restriction EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width 12.5 mm
Height 99 mm
Depth 114.5 mm
Ambient conditions
Ambient temperature (operation) -20 °C ... 60 °C (Any mounting position)
Ambient temperature (storage/transport) -40 °C ... 80 °C
Maximum altitude ≤ 2000 m
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal
deviations.
https://www.phoenixcontact.com/us/products/2904089
09/06/2016Page2/6
Signal isolator-MACX MCR-SL-RPSS-2I-2I-2904089
Technical data
Ambient conditions
Degree of protection IP20
Input data
Current input signal 4 mA ... 20 mA
Transmitter supply voltage > 16 V (at 20 mA)
Output data
Signal output Current output
Current output signal 4 mA ... 20 mA (active)
Transmission Behavior 1:1 to input signal
Load/output load current output ≤ 450 Ω (20 mA)
≤ 375 Ω (24 mA)
Output behavior in the event of an error < 3.6 mA (In the event of cable break at the input (as per NE 43))
> 22.5 mA (In the event of cable short circuit at the input (as per NE 43))
Power supply
Nominal supply voltage 24 V DC
Supply voltage range 19.2 V DC ... 30 V DC (24 V DC -20%...+25%)
Max. current consumption < 100 mA (24 V / 20 mA)
Power consumption < 1.4 W (at 24 V DC / 20 mA)
Connection data
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 1.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 1.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 16
Stripping length 8 mm
Screw thread M3
Connection method Screw connection
Tightening torque, min 0.5 Nm
Tightening torque max 0.6 Nm
General
Maximum transmission error < 0.1 % (of final value)
Transmission error, typical < 0.05 % (of final value)
Maximum temperature coefficient < 0.01 %/K
Step response (10-90%) < 1.3 ms (for 4 mA ... 20 mA step)
Status display Green LED (supply voltage)
https://www.phoenixcontact.com/us/products/2904089
09/06/2016Page3/6
Signal isolator-MACX MCR-SL-RPSS-2I-2I-2904089
Technical data
General
Flammability rating according to UL 94 V0
Degree of pollution 2
Overvoltage category II
Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC
Interference emission EN 61000-6-4
Housing material PA 66-FR
Color green
Designation Input/output, power supply
Electrical isolation 300 Vrms (Rated insulation voltage (overvoltage category II; degree of
pollution 2, safe isolation as per EN 61010-1))
2.5 kV (50 Hz, 1 min., test voltage)
Designation Input/output
Electrical isolation 375 V (Peak value in accordance with EN 60079-11)
Designation Input/power supply
Electrical isolation 375 V (Peak value in accordance with EN 60079-11)
Designation Output 1/output 2/ power supply
Electrical isolation 1.5 kV (50 Hz, 1 min., test voltage)
Conformance CE-compliant, additionally EN 61326
ATEX II 3 G Ex nA IIC T4 Gc X
UL, USA/Canada UL 61010 Listed
Class I, Div. 2, Groups A, B, C, D T4
Class I, Zone 2, Group IIC T4
Data communication (bypass)
HART function Yes
Protocols supported HART
Standards and Regulations
Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC
Noise emission EN 61000-6-4
Flammability rating according to UL 94 V0
Conformance CE-compliant, additionally EN 61326
ATEX II 3 G Ex nA IIC T4 Gc X
UL, USA/Canada UL 61010 Listed
Class I, Div. 2, Groups A, B, C, D T4
Class I, Zone 2, Group IIC T4
Drawings
https://www.phoenixcontact.com/us/products/2904089
09/06/2016Page4/6
Signal isolator-MACX MCR-SL-RPSS-2I-2I-2904089
Block diagram
Zone 2
GND +24V
PLC / DCS
Sensor / Field
IN OUT
CH1
CH2
AI
passive
3.2
3.1
+
-
HHT
passive
2.1
2.2 -
+
HHT
+
-
CH2
3.2
3.1
2.2
2.1
GND 1.2
1.1
+24V
Power
active
active
5.2
5.1
4.2
4.1
+
-
CH1
5.2
5.1
HHT
4.2
4.1
HHT
Pictogram
POWER
OUT
OUT
IN
POWER
IN
POWER
II
II
Classifications
eCl@ss
eCl@ss 4.0 27210120
eCl@ss 4.1 27210120
eCl@ss 5.0 27210120
eCl@ss 5.1 27210120
eCl@ss 6.0 27210120
eCl@ss 7.0 27210120
eCl@ss 8.0 27210120
eCl@ss 9.0 27210120
ETIM
ETIM 3.0 EC001485
ETIM 4.0 EC002498
ETIM 5.0 EC002653
UNSPSC
UNSPSC 6.01 30211506
UNSPSC 7.0901 39121008
UNSPSC 11 39121008
UNSPSC 12.01 39121008
UNSPSC 13.2 39121008
Approvals
Approvals
https://www.phoenixcontact.com/us/products/2904089
09/06/2016Page5/6
Signal isolator-MACX MCR-SL-RPSS-2I-2I-2904089
Approvals
Approvals
UL Listed / cUL Listed / Functional Safety / cULus Listed
Ex Approvals
UL Listed / cUL Listed / cULus Listed
Approval details
UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htmFILE E 330267
cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htmFILE E 330267
Functional SafetyBVS Pb 04/13
cULus Listed
Accessories
Accessories
DIN rail connector
DIN rail bus connectors-ME 6,2 TBUS-2 1,5/5-ST-3,81 GN-2869728
DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.
Power module
https://www.phoenixcontact.com/us/products/2904089
09/06/2016Page6/6
Signal isolator-MACX MCR-SL-RPSS-2I-2I-2904089
Accessories
Power and error message module-MACX MCR-PTB-2865625
Power and fault signaling module with screw connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GN DIN
rail connector
Power and error message module-MACX MCR-PTB-SP-2924184
Power and fault signaling module with push-in connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GN
DIN rail connector
Phoenix Contact 2016 © - all rights reserved
http://www.phoenixcontact.com
