© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 1
One WORLD One Brand One Strategy One Focus One Team One KEMET
Benets
• Meets or exceeds EIA standard 535BAAC
• Taped and reeled per EIA 481-1
• High surge current capability
• Optional gold-plated terminations
• High ripple current capability
• 100% surge current test on C, D, E, U, V, X sizes
• 100% steady-state accelerated aging
• Capacitance values of 0.1μF to 1000μF
• Tolerances of ±10% and ±20%
• Voltage rating of 2.5-50 VDC
• Extended range values
• Available tested to DSCC 95158
• RoHS compliance and lead-free terminations
• Operating temperature range of -55˚C to +125˚C
Applications
Typical applications include decoupling and ltering in industrial
and automotive end applications, such as DC/DC converters,
portable electronics, telecommunications, and control units
requiring high ripple current capability.
Overview
The low ESR, surge-robust T495 Series is designed for
demanding applications that require high surge current and
high ripple current capability. This series builds upon the proven
capabilities of our industrial grade tantalum chip capacitors to
offer several advantages such as low ESR, high ripple current
capability, excellent capacitance stability, and improved resistance
to high in-rush currents. These benets are achieved though
a combination of proprietary design, materials, and process
parameters as well as high-stress, low impedance electrical
conditioning performed prior to screening.
Low ESR MnO2 Tantalum Surface Mount Capacitors
T495 Surge Robust Low ESR MnO2 Series
Environmental Compliance
RoHS Compliant (6/6)* according to Directive 2002/95/EC
*When ordered with 100% Sn Solder
SPICE
For a detailed analysis of specic part numbers, please visit kemet.com for a free download of KEMET's SPICE software. The KEMET
SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency,
temperature, ripple, and DC bias conditions.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 22
Low ESR MnO2 Tantalum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Ordering Information
*See www.kemet.com for Pb Free transition.
Performance Characteristics
Item Performance Characteristics
Operating Temperature -55°C to 125°C
Rated Capacitance Range 0.47µF - 1000µF @ 120 Hz/25°C
Capacitance Tolerance K Tolerance (10%), M Tolerance (20%)
Rated Voltage Range 2.5V - 50V
DF(120Hz) Refer to Part Number Electrical Specication Table
ESR (100kHz) Refer to Part Number Electrical Specication Table
Leakage Current ≤ 0.01CV (µA) at Rated Voltage after 5 minutes
T 495 X 107 M 010 A T E045
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Code Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low ESR
A = 3216-18
B = 3258-19
C = 6032-25
D = 7343-31
E = 7260-38
T = 3258-12
V = 7343-20
X = 7343-43
First two digits
represent
signicant
gures. Third
digit species
number of zeros.
K = ±10%
M = ±20%
2R5 = 2.5V
004 = 4V
006 = 6.3V
010 = 10V
016 = 16V
020 = 20V
025 = 25V
035 = 35V
050 = 50V
A = N/A
Z = N/A
T = 100% Matte
Tin (Sn) Plated*
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
G = Gold Plated (A,
B, C, D, X only)
E = ESR
Last three digits
specify ESR in
mOhms. (045 =
45mOhms)
Blank = 7" Reel
7280 = 13" Reel
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 33
Low ESR MnO2 Tantalum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Qualication
Test Condition Characteristics
Endurance 85°C @ Rated Voltage, 2000 Hrs.
125°C @ 2/3 Rated Voltage, 2000 Hrs.
ΔC/C Within ± 10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Storage Life 125°C @ 0 Volts, 2000 Hrs.
ΔC/C Within ± 10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Thermal Shock Mil-Std-202, Method 107, Condition B, mounted, -55C° to
125° C, 1000 cycles
ΔC/C Within ± 5% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Temperature Stability
Extreme temperature exposure at a
succession of continuous steps at +25ºC,
-55ºC, +25ºC, +85ºC, +125ºC, +25ºC.
+25°C -55°C +85°C +125°C
ΔC/C IL* ± 10% ± 10% ± 20%
DF IL IL 1.5 x IL 1.5 x IL
DCL IL n/a 10 x IL 12 x IL
Surge Voltage 25°C and 85°C, 1.32 x Rated Voltage 1000 cycles (125°C,
1.2 x Rated Voltage)
ΔC/C Within ± 5% of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Shock/Vibration
Mil-Std-202, Meth. 213, Cond. I, 100G Peak
Mil-Std-202, Meth. 204, Cond. D, 10Hz to 2000Hz, 20G
Peak
ΔC/C Within ±10 of initial value
DF Within initial limits
DCL Within initial limits
*IL = Initial Limit
Certication
AEC-Q200
DSCC Drawing 95158
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 44
Low ESR MnO2 Tantalum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Electrical Characteristics
1
10
100
1000
100 1,000 10,000 100,000 1,000,000 10,000,000
Capacitance (μF)
Frequency (Hz)
T495C476M016ATE350
T495D157M016ATE085
T495X227M016ATE100
Capacitance vs. Frequency
0.01
0.1
1
10
100
100 1,000 10,000 100,000 1,000,000 10,000,000
Impedance, ESR (Ohms)
Frequency (Hz)
T495C476M016ATE350_IMP
T495D157M016ATE085_IMP
T495X227M016ATE100_IMP
T495C476M016ATE350_ESR
T495D157M016ATE085_ESR
T495X227M016ATE100_ESR
ESR vs. Frequency
Dimensions – Millimeters (Inches)
Metric will govern
Notes: (Ref) – Dimensions provided for reference only. No dimensions provided for B, P or R because low prole cases do not have a bevel or a notch.
* MIL-C-55365/8 specied dimensions
Case Size Component
KEMET EIA L* W* H* F* ±0.1
±(.004)
S* ±0.3
±(.012)
B* ±0.15
(Ref) ±.006 X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
A3216-18
3.2 ± 0.2
(.126 ± .008)
1.6 ± 0.2
(.063 ± .008)
1.6 ± 0.2
(.063 ± .008)
1.2 (.047) 0.8 (.031) 0.4 (.016)
0.10 ± 0.10
(.004 ± .004)
0.4 (.016) 0.4 (.016) 0.13 (.005) 1.4 (.055) 1.1 (.043) 1.3 (.051)
B3528-21
3.5 ± 02
(138 ± .008)
2.8 ± 0.2
(.110 ± .008)
1.9 ± 0.2
(.075 ± .008)
2.2 (.087) 0.8 (.031) 0.4 (.016)
0.10 ± 0.10
(.004 ± .004)
0.5 (.020) 1.0 (.039) 0.13 (.005) 2.1 (.083) 1.8 (.071) 2.2 (.087)
C6032-28
6.0 ± 0.3
(.236 ± .03)
3.2 ± 0.3
(.126 ± .012)
2.5 ± 0.3
(.098 ± .012)
2.2 (.087) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
0.9 (.035) 1.0 (.039) 0.13 (.005) 3.1 ( (.122) 2.8 (.110) 2.4 (.094)
D7343-31
7.3 ± 0.3
(287 ± .012)
4.3 ± 0.3
(.169 ± .012)
2.8 ± 0.3
(098 ± .012)
2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
X7343-43
7.3 ± 0.3
(.287 ± .012)
4.3 ± 0.3
(.169 ± .012)
4.0 ± 0.3
(.157 ± .012)
2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
E7260-38
7.3 ± 0.3
(.287 ± .012)
6.0± 0.3
(.236 ± .012)
3.6 ± 0.2
(.142 ± .008)
4.1 (.161) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
0.9 (.035) 1.0 (.039) 0.13 (.005) 0.13 (.005) 3.5 (.138) 3.5 (.138)
T3528-12
3.5 ± 0.2
(.138 ± .008)
2.8 ± 0.2
(.110 ± .008)
1.2 (.047) 2.2 (.087) 0.8 (.031) N/A 0.05 (.002) N/A N/A 0.13 (.005) 2.1 (.083) 1.8 (.071) 2.2 (.087)
V7343-20
7.3 ± 0.3
(287 ± .012)
4.3 ± 0.3
(.169 ± .012)
2.0 (.079) 2.4 (.094) 1.3 (.051) N/A 0.05 (.002) N/A N/A 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
15
Termination
cutout at
KEMET’s
Option,
either end
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 55
Low ESR MnO2 Tantalum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
85ºC
120Hz
KEMET/EIA (See below for
part options)
+25ºC
+25ºC 100kHz
+25ºC 100kHz
+85ºC 100kHz
+125ºC 100kHz
Temp≤260ºC
VDC
µF
µAmps
mOhms
mAmps
mAmps
mAmps
J-STD-020D
2.5 100 T/3528-12 T495T107(M)2R5A(2)E3K0 2.5 24.0 3000 153 138 61 1.0
2.5 220 D/7343-31 T495D227(1)2R5A(2)E045 5.5 8.0 45 1826 1643 730 1.0
2.5 470 D/7343-31 T495D477(1)2R5A(2)E035 11.8 8.0 35 2070 1863 828 1.0
2.5 1000 X/7343-43 T495X108(1)2R5A(2)E030 25.0 15.0 30 2345 2111 938 1.0
2.5 1000 X/7343-43 T495X108(1)2R5A(2)E040 25.0 15.0 40 2031 1828 812 1.0
4 68 V/7343-19 T495V686(1)004A(2)E150 2.7 6.0 150 913 822 365 1.0
4 100 B/3528-20 T495B107(1)004A(2)E500 4.0 8.0 500 412 371 165 1.0
4 150 B/3528-20 T495B157(M)004A(2)E900 6.0 12.0 900 307 276 123 1.0
4 150 C/6032-28 T495C157(1)004A(2)E070 6.0 12.0 70 1254 1129 502 1.0
4 150 C/6032-28 T495C157(1)004A(2)E250 6.0 8.0 250 663 597 265 1.0
4 220 D/7343-31 T495D227(1)004A(2)E040 8.8 8.0 40 1936 1742 774 1.0
4 220 D/7343-31 T495D227(1)004A(2)E050 8.8 8.0 50 1732 1559 693 1.0
4 220 D/7343-31 T495D227(1)004A(2)E100 8.8 8.0 100 1225 1103 490 1.0
4 330 C/6032-28 T495C337(1)004A(2)E300 13.2 10.0 300 606 545 242 1.0
4 330 C/6032-28 T495C337(1)004A(2)E700 13.2 12.0 700 396 356 158 1.0
4 330 D/7343-31 T495D337(1)004A(2)E030 13.2 8.0 30 2236 2012 894 1.0
4 330 D/7343-31 T495D337(1)004A(2)E045 13.2 8.0 45 1826 1643 730 1.0
4 470 D/7343-31 T495D477(1)004A(2)E045 18.8 12.0 45 1826 1643 730 1.0
4 470 D/7343-31 T495D477(1)004A(2)E100 18.8 12.0 100 1225 1103 490 1.0
4 470 X/7343-43 T495X477(1)004A(2)E030 18.8 8.0 30 2345 2111 938 1.0
4 470 X/7343-43 T495X477(1)004A(2)E045 18.8 8.0 45 1915 1724 766 1.0
4 470 X/7343-43 T495X477(1)004A(2)E100 18.8 8.0 100 1285 1157 514 1.0
4 1000 X/7343-43 T495X108(1)004A(2)E030 40.0 12.0 30 2345 2111 938 1.0
4 1000 X/7343-43 T495X108(1)004A(2)E040 40.0 12.0 40 2031 1828 812 1.0
4 1000 X/7343-43 T495X108(1)004A(2)E060 40.0 12.0 60 1658 1492 663 1.0
4 1000 X/7343-43 T495X108(1)004A(2)E070 40.0 12.0 70 1535 1382 614 1.0
4 1000 E/7260-38 T495E108(1)004A(2)E035 40.0 15.0 35 2390 2151 956 1.0
4 1000 E/7260-38 T495E108(1)004A(2)E050 40.0 15.0 50 2000 1800 800 1.0
2.5 6.8 A/3216-18 T495A685K006ATE2K0 0.2 6.0 2000 194 175 78 1.0
6.3 47 B/3528-20 T495B476(1)006A(2)E450 3.0 6.0 450 435 392 174 1.0
6.3 47 C/6032-28 T495C476(1)006A(2)E250 3.0 6.0 250 663 597 265 1.0
6.3 47 V/7343-19 T495V476(1)006A(2)E150 3.0 6.0 150 913 822 365 1.0
6.3 68 D/7343-31 T495D686(1)006A(2)E175 4.3 4.0 175 926 833 370 1.0
6.3 68 D/7343-31 T495D686(1)006A(2)4095 4.3 4.0 175 926 833 370 1.0
6.3 100 B/3528-20 T495B107(1)006A(2)E400 6.3 15.0 400 461 415 184 1.0
6.3 100 B/3528-20 T495B107(M)006A(2)E700 6.3 15.0 700 348 313 139 1.0
6.3 100 C/6032-28 T495C107(1)006A(2)E075 6.3 8.0 75 1211 1090 484 1.0
6.3 100 C/6032-28 T495C107(1)006A(2)E150 6.3 8.0 150 856 770 342 1.0
6.3 100 D/7343-31 T495D107(1)006A(2)E050 6.3 6.0 50 1732 1559 693 1.0
6.3 100 D/7343-31 T495D107(1)006A(2)E130 6.3 6.0 130 1074 967 430 1.0
6.3 100 D/7343-31 T495D107(1)006A(2)E150 6.3 8.0 150 1000 900 400 1.0
6.3 100 V/7343-19 T495V107(1)006A(2)E090 6.3 8.0 90 1179 1061 472 1.0
6.3 100 V/7343-19 T495V107(1)006A(2)E150 6.3 8.0 150 913 822 365 1.0
6.3 150 C/6032-28 T495C157(1)006A(2)E050 9.5 8.0 50 1483 1335 593 1.0
6.3 150 C/6032-28 T495C157(M)006A(2)E200 9.5 8.0 200 742 668 297 1.0
6.3 150 V/7343-19 T495V157(1)006A(2)E040 9.5 8.0 40 1768 1591 707 1.0
6.3 150 V/7343-19 T495V157(1)006A(2)E070 9.5 8.0 70 1336 1202 534 1.0
6.3 150 D/7343-31 T495D157(1)006A(2)E050 9.5 6.0 50 1732 1559 693 1.0
VDC
µF
KEMET/EIA (See below for
part options)
µAmps
mOhms
mAmps
mAmps
mAmps
J-STD-020A
85ºC
120Hz
+25ºC
+25ºC 100kHz
+45ºC 100kHz
+85ºC 100kHz
+105ºC 100kHz
Temp≤260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum allowable
ripple current
Moisture
Sensitivity
Other part number options:
Where the 10th character equal to K (10% tolerance) is also available in M (20% tolerance).
Where the 10th character equal to M (20% tolerance) is only available in M (20% tolerance).
Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H)
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Table 1 – Ratings & Part Number Reference
T 495 X 107 M 010 A T E045
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Code Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low ESR
A = 3216-18
B = 3258-19
C = 6032-25
D = 7343-31
E = 7260-38
T = 3258-12
V = 7343-20
X = 7343-43
First two digits
represent
signi cant
gures. Third
digit speci es
number of zeros.
K = ±10%
M = ±20%
2R5 = 2.5V
004 = 4V
006 = 6.3V
010 = 10V
016 = 16V
020 = 20V
025 = 25V
035 = 35V
050 = 50V
A = N/A
Z = N/A
T = 100% Matte
Tin (Sn) Plated*
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
G = Gold Plated (A,
B, C, D, X only)
E = ESR
Last three digits
specify ESR in
mOhms. (045 =
45mOhms)
Blank = 7" Reel
7280 = 13" Reel
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 66
Low ESR MnO2 Tantalum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Other part number options:
Where the 10th character equal to K (10% tolerance) is also available in M (20% tolerance).
Where the 10th character equal to M (20% tolerance) is only available in M (20% tolerance).
Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H)
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Table 1 – Ratings & Part Number Reference con't
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
85ºC
120Hz
KEMET/EIA (See below for
part options)
+25ºC
+25ºC 100kHz
+25ºC 100kHz
+85ºC 100kHz
+125ºC 100kHz
Temp≤260ºC
VDC
µF
µAmps
mOhms
mAmps
mAmps
mAmps
J-STD-020D
6.3 150 D/7343-31 T495D157(1)006A(2)E125 9.5 6.0 125 1095 986 438 1.0
6.3 150 X/7343-43 T495X157(1)006A(2)E100 9.5 6.0 100 1285 1157 514 1.0
6.3 150 X/7343-43 T495X157(1)006A(2)4095 9.5 6.0 125 1149 1034 460 1.0
6.3 220 C/6032-28 T495C227(1)006(2)E225 13.9 10.0 25 2098 1888 839 1.0
6.3 220 D/7343-31 T495D227(1)006A(2)E045 13.9 8.0 45 1826 1643 730 1.0
6.3 220 D/7343-31 T495D227(1)006A(2)E100 13.9 8.0 100 1225 1103 490 1.0
6.3 220 D/7343-31 T495D227(1)006A(2)4095 13.9 8.0 100 1225 1103 490 1.0
6.3 220 X/7343-43 T495X227(1)006A(2)E070 13.9 8.0 70 1535 1382 614 1.0
6.3 220 X/7343-43 T495X227(1)006A(2)E100 13.9 8.0 100 1285 1157 514 1.0
6.3 220 V/7343-19 T495V227(1)006ATE150 13.9 8.0 150 913 822 365 1.0
6.3 220 X/7343-43 T495X227(1)006A(2)4095 13.9 8.0 100 1285 1157 514 1.0
6.3 330 D/7343-31 T495D337(1)006A(2)E040 20.8 8.0 40 1936 1742 774 1.0
6.3 330 D/7343-31 T495D337(1)006A(2)E050 20.8 8.0 50 1732 1559 693 1.0
6.3 330 D/7343-31 T495D337(1)006A(2)E070 20.8 8.0 70 1464 1318 586 1.0
6.3 330 D/7343-31 T495D337(1)006A(2)E100 20.8 8.0 100 1225 1103 490 1.0
6.3 330 X/7343-43 T495X337(1)006A(2)E065 20.8 8.0 65 1593 1434 637 1.0
6.3 330 X/7343-43 T495X337(1)006A(2)E045 20.8 8.0 45 1915 1724 766 1.0
6.3 330 X/7343-43 T495X337(1)006A(2)E100 20.8 8.0 100 1285 1157 514 1.0
6.3 330 E/7260-38 T495E337(1)006A(2)E060 20.8 8.0 60 1826 1643 730 1.0
6.3 330 E/7260-38 T495E337(1)006A(2)E100 20.8 8.0 100 1414 1273 566 1.0
6.3 470 D/7343-31 T495D477(M)006A(2)E045 29.6 12.0 45 1826 1643 730 1.0
6.3 470 D/7343-31 T495D477(1)006A(2)E100 29.6 12.0 100 1225 1103 490 1.0
6.3 470 D/7343-31 T495D477(1)006A(2)E125 29.6 12.0 125 1095 986 438 1.0
6.3 470 X/7343-43 T495X477(1)006A(2)E030 29.6 10.0 30 2345 2111 938 1.0
6.3 470 X/7343-43 T495X477(1)006A(2)E045 29.6 10.0 45 1915 1724 766 1.0
6.3 470 X/7343-43 T495X477(1)006A(2)E050 29.6 10.0 50 1817 1635 727 1.0
6.3 470 X/7343-43 T495X477(1)006A(2)E065 29.6 10.0 65 1593 1434 637 1.0
6.3 470 E/7260-38 T495E477(1)006A(2)E040 29.6 12.0 40 2236 2012 894 1.0
6.3 470 E/7260-38 T495E477(1)006A(2)E055 29.6 10.0 55 1907 1716 763 1.0
6.3 470 E/7260-38 T495E477(1)006A(2)E100 29.6 10.0 100 1414 1273 566 1.0
6.3 1000 E/7260-38 T495E108(1)006A(2)E050 63.0 15.0 50 2000 1800 800 1.0
10 4.7 A/3216-18 T495A475(1)010A(2)E1K3 0.5 6.0 1300 240 216 96 1.0
10 4.7 B/3528-20 T495B475(1)010A(2)E1K3 0.5 15.0 1300 256 230 102 1.0
10 6.8 A/3216-18 T495A685(1)010A(2)E1K8 0.7 6.0 1800 204 184 82 1.0
10 6.8 B/3528-20 T495B685(1)010A(2)E900 0.7 6.0 900 307 276 123 1.0
10 10 A/3216-18 T495A106(1)010A(2)E1K8 1.0 6.0 1800 204 184 82 1.0
10 10 A/3216-18 T495A106(1)010AT E2K0 1.0 6.0 2000 194 175 78 1.0
10 10 B/3528-20 T495B106(1)010AT E1K2 1.0 6.0 1200 266 239 106 1.0
10 10 B/3528-20 T495B106(1)010A(2)E750 1.0 6.0 750 337 303 135 1.0
10 10 B/3528-20 T495B106(1)010AT E600 1.0 6.0 600 376 338 150 1.0
10 10 C/6032-28 T495C106(1)010AT E400 1.0 6.0 400 524 472 210 1.0
10 10 T/3528-12 T495T106(1)010AT E1K5 1.0 6.0 1500 216 194 86 1.0
10 15 A/3216-18 T495A156(1)010AT E1K0 1.5 6.0 1000 274 247 110 1.0
10 15 A/3216-18 T495A156(1)010AT E1K8 1.5 6.0 1800 204 184 82 1.0
10 15 B/3528-20 T495B156(1)010AT E600 1.5 6.0 600 376 338 150 1.0
10 15 B/3528-20 T495B156(1)010AT E900 1.5 6.0 900 307 276 123 1.0
10 15 T/3528-12 T495T156(1)010AT E1K2 1.5 6.0 1200 242 218 97 1.0
10 15 B/3528-20 T495B156(1)010A(2)E500 1.5 6.0 500 412 371 165 1.0
10 15 C/6032-28 T495C156(1)010A(2)E375 1.5 6.0 375 542 488 217 1.0
VDC
µF
KEMET/EIA (See below for
part options)
µAmps
mOhms
mAmps
mAmps
mAmps
J-STD-020A
85ºC
120Hz
+25ºC
+25ºC 100kHz
+45ºC 100kHz
+85ºC 100kHz
+105ºC 100kHz
Temp≤260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum allowable
ripple current
Moisture
Sensitivity
Roll Over for
Order Info.
T 495 X 107 M 010 A T E045
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Code Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low ESR
A = 3216-18
B = 3258-19
C = 6032-25
D = 7343-31
E = 7260-38
T = 3258-12
V = 7343-20
X = 7343-43
First two digits
represent
signi cant
gures. Third
digit speci es
number of zeros.
K = ±10%
M = ±20%
2R5 = 2.5V
004 = 4V
006 = 6.3V
010 = 10V
016 = 16V
020 = 20V
025 = 25V
035 = 35V
050 = 50V
A = N/A
Z = N/A
T = 100% Matte
Tin (Sn) Plated*
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
G = Gold Plated (A,
B, C, D, X only)
E = ESR
Last three digits
specify ESR in
mOhms. (045 =
45mOhms)
Blank = 7" Reel
7280 = 13" Reel
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 77
Low ESR MnO2 Tantalum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Other part number options:
Where the 10th character equal to K (10% tolerance) is also available in M (20% tolerance).
Where the 10th character equal to M (20% tolerance) is only available in M (20% tolerance).
Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H)
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Table 1 – Ratings & Part Number Reference con't
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
85ºC
120Hz
KEMET/EIA (See below for
part options)
+25ºC
+25ºC 100kHz
+25ºC 100kHz
+85ºC 100kHz
+125ºC 100kHz
Temp≤260ºC
VDC
µF
µAmps
mOhms
mAmps
mAmps
mAmps
J-STD-020D
10 15 C/6032-28 T495C156(1)010A(2)E400 1.5 6.0 400 524 472 210 1.0
10 15 C/6032-28 T495C156(1)010A(2)E475 1.5 6.0 475 481 433 192 1.0
10 22 A/3216-18 T495A226(1)010AT E1K2 2.2 8.0 1200 250 225 100 1.0
10 22 A/3216-18 T495A226(1)010AT E1K5 2.2 8.0 1500 224 202 90 1.0
10 22 B/3528-20 T495B226(1)010AT E400 2.2 6.0 400 461 415 184 1.0
10 22 B/3528-20 T495B226(1)010AT E500 2.2 6.0 500 412 371 165 1.0
10 22 B/3528-20 T495B226(1)010AT E700 2.2 6.0 700 348 313 139 1.0
10 22 B/3528-20 T495B226(1)010AT E800 2.2 6.0 800 326 293 130 1.0
10 22 C/6032-28 T495C226(1)010A(2)E290 2.2 6.0 290 616 554 246 1.0
10 22 C/6032-28 T495C226(1)010A(2)E345 2.2 6.0 345 565 509 226 1.0
10 33 B/3528-20 T495B336(1)010A(2)E450 3.3 6.0 450 435 392 174 1.0
10 33 V/7343-19 T495V336(1)010A(2)E100 3.3 6.0 100 1118 1006 447 1.0
10 33 V/7343-19 T495V336(1)010A(2)E150 3.3 6.0 150 913 822 365 1.0
10 47 B/3528-20 T495B476(1)010A(2)E500 4.7 6.0 500 412 371 165 1.0
10 47 D/7343-31 T495D476(1)010A(2)E080 4.7 4.0 80 1369 1232 548 1.0
10 47 D/7343-31 T495D476(1)010A(2)E090 4.7 6.0 90 1291 1162 516 1.0
10 47 D/7343-31 T495D476(1)010A(2)E200 4.7 4.0 200 866 779 346 1.0
10 47 D/7343-31 T495D476(1)010A(2)4095 4.7 4.0 200 866 779 346 1.0
10 68 B/3528-20 T495B686(1)010A(2)E600 6.8 10.0 600 376 338 150 1.0
10 68 B/3528-20 T495B686(1)010A(2)E750 6.8 10.0 750 337 303 135 1.0
10 68 B/3528-20 T495B686(M)010A(2)E900 6.8 10.0 900 307 276 123 1.0
10 68 C/6032-28 T495C686(1)010A(2)E080 6.8 6.0 80 1173 1056 469 1.0
10 68 C/6032-28 T495C686(1)010A(2)E225 6.8 6.0 225 699 629 280 1.0
10 68 V/7343-19 T495V686(1)010A(2)E070 6.8 6.0 70 1336 1202 534 1.0
10 68 V/7343-19 T495V686(1)010A(2)E100 6.8 6.0 100 1118 1006 447 1.0
10 68 V/7343-19 T495V686(1)010A(2)E140 6.8 6.0 140 945 851 378 1.0
10 68 D/7343-31 T495D686(1)010A(2)E070 6.8 6.0 70 1464 1318 586 1.0
10 68 D/7343-31 T495D686(1)010A(2)E090 6.8 6.0 90 1291 1162 516 1.0
10 68 D/7343-31 T495D686(1)010A(2)E150 6.8 6.0 150 1000 900 400 1.0
10 68 X/7343-43 T495X686(1)010A(2)E150 6.8 4.0 150 1049 944 420 1.0
10 68 X/7343-43 T495X686(1)010A(2)4095 6.8 4.0 150 1049 944 420 1.0
10 100 V/7343-19 T495V107(1)010A(2)E100 10.0 8.0 100 1118 1006 447 1.0
10 100 V/7343-19 T495V107(1)010A(2)E150 10.0 8.0 150 913 822 365 1.0
10 100 D/7343-31 T495D107(1)010A(2)E050 10.0 8.0 50 1732 1559 693 1.0
10 100 D/7343-31 T495D107(1)010A(2)E065 10.0 8.0 65 1519 1367 608 1.0
10 100 D/7343-31 T495D107(1)010A(2)E080 10.0 8.0 80 1369 1232 548 1.0
10 100 D/7343-31 T495D107(1)010A(2)E100 10.0 8.0 100 1225 1103 490 1.0
10 100 D/7343-31 T495D107(1)010A(2)4095 10.0 8.0 100 1225 1103 490 1.0
10 100 X/7343-43 T495X107(1)010A(2)E100 10.0 6.0 100 1285 1157 514 1.0
10 100 X/7343-43 T495X107(1)010A(2)4095 10.0 6.0 100 1285 1157 514 1.0
10 150 V/7343-19 T495V157(1)010A(2)E100 15.0 8.0 100 1118 1006 447 1.0
10 150 V/7343-19 T495V157(M)010A(2)E150 15.0 8.0 150 913 822 365 1.0
10 150 D/7343-31 T495D157(1)010A(2)E050 15.0 8.0 50 1732 1559 693 1.0
10 150 D/7343-31 T495D157(1)010A(2)E060 15.0 8.0 60 1581 1423 632 1.0
10 150 D/7343-31 T495D157(1)010A(2)E080 15.0 8.0 80 1369 1232 548 1.0
10 150 D/7343-31 T495D157(1)010A(2)E100 15.0 8.0 100 1225 1103 490 1.0
10 150 D/7343-31 T495D157(1)010A(2)4095 15.0 8.0 100 1225 1103 490 1.0
10 150 X/7343-43 T495X157(1)010A(2)E070 15.0 8.0 70 1535 1382 614 1.0
10 150 X/7343-43 T495X157(1)010A(2)E080 15.0 8.0 80 1436 1292 574 1.0
10 150 X/7343-43 T495X157(1)010A(2)E085 15.0 8.0 85 1393 1254 557 1.0
VDC
µF
KEMET/EIA (See below for
part options)
µAmps
mOhms
mAmps
mAmps
mAmps
J-STD-020A
85ºC
120Hz
+25ºC
+25ºC 100kHz
+45ºC 100kHz
+85ºC 100kHz
+105ºC 100kHz
Temp≤260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum allowable
ripple current
Moisture
Sensitivity
Roll Over for
Order Info.
T 495 X 107 M 010 A T E045
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Code Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low ESR
A = 3216-18
B = 3258-19
C = 6032-25
D = 7343-31
E = 7260-38
T = 3258-12
V = 7343-20
X = 7343-43
First two digits
represent
signi cant
gures. Third
digit speci es
number of zeros.
K = ±10%
M = ±20%
2R5 = 2.5V
004 = 4V
006 = 6.3V
010 = 10V
016 = 16V
020 = 20V
025 = 25V
035 = 35V
050 = 50V
A = N/A
Z = N/A
T = 100% Matte
Tin (Sn) Plated*
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
G = Gold Plated (A,
B, C, D, X only)
E = ESR
Last three digits
specify ESR in
mOhms. (045 =
45mOhms)
Blank = 7" Reel
7280 = 13" Reel
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 88
Low ESR MnO2 Tantalum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Other part number options:
Where the 10th character equal to K (10% tolerance) is also available in M (20% tolerance).
Where the 10th character equal to M (20% tolerance) is only available in M (20% tolerance).
Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H)
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Table 1 – Ratings & Part Number Reference con't
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
85ºC
120Hz
KEMET/EIA (See below for
part options)
+25ºC
+25ºC 100kHz
+25ºC 100kHz
+85ºC 100kHz
+125ºC 100kHz
Temp≤260ºC
VDC
µF
µAmps
mOhms
mAmps
mAmps
mAmps
J-STD-020D
10 150 X/7343-43 T495X157(1)010A(2)E100 15.0 8.0 100 1285 1157 514 1.0
10 150 X/7343-43 T495X157(1)010A(2)4095 15.0 8.0 100 1285 1157 514 1.0
10 220 D/7343-31 T495D227(1)010A(2)E045 22.0 8.0 45 1826 1643 730 1.0
10 220 D/7343-31 T495D227(1)010A(2)E075 22.0 8.0 75 1414 1273 566 1.0
10 220 D/7343-31 T495D227(1)010A(2)E100 22.0 8.0 100 1225 1103 490 1.0
10 220 D/7343-31 T495D227(1)010A(2)E125 22.0 8.0 125 1095 986 438 1.0
10 220 X/7343-43 T495X227(1)010A(2)E045 22.0 8.0 45 1915 1724 766 1.0
10 220 X/7343-43 T495X227(1)010A(2)E050 22.0 8.0 50 1817 1635 727 1.0
10 220 X/7343-43 T495X227(1)010A(2)E060 22.0 8.0 60 1658 1492 663 1.0
10 220 X/7343-43 T495X227(1)010A(2)E070 22.0 8.0 70 1535 1382 614 1.0
10 220 X/7343-43 T495X227(1)010A(2)E100 22.0 8.0 100 1285 1157 514 1.0
10 220 X/7343-43 T495X227(1)010A(2)4095 22.0 8.0 100 1285 1157 514 1.0
10 330 D/7343-31 T495D337(1)010A(2)E100 33.0 8.0 100 1225 1103 490 1.0
10 330 D/7343-31 T495D337(1)010A(2)E125 33.0 10.0 125 1095 986 438 1.0
10 330 D/7343-31 T495D337(1)010A(2)E150 33.0 10.0 150 1000 900 400 1.0
10 330 X/7343-43 T495X337(1)010A(2)E035 33.0 10.0 35 2171 1954 868 1.0
10 330 X/7343-43 T495X337(1)010A(2)E050 33.0 10.0 50 1817 1635 727 1.0
10 330 X/7343-43 T495X337(1)010A(2)E060 33.0 10.0 60 1658 1492 663 1.0
10 330 X/7343-43 T495X337(1)010A(2)E100 33.0 10.0 100 1285 1157 514 1.0
10 330 E/7260-38 T495E337(1)010A(2)E040 33.0 8.0 40 2236 2012 894 1.0
10 330 E/7260-38 T495E337(1)010A(2)E060 33.0 10.0 60 1826 1643 730 1.0
10 330 E/7260-38 T495E337(1)010A(2)E100 33.0 10.0 100 1414 1273 566 1.0
10 470 X/7343-43 T495X477(M)010A(2)E045 47.0 10.0 45 1915 1724 766 1.0
10 470 X/7343-43 T495X477(M)010A(2)E050 47.0 10.0 50 1817 1635 727 1.0
10 470 X/7343-43 T495X477(M)010A(2)E060 47.0 10.0 60 1658 1492 663 1.0
10 470 X/7343-43 T495X477(M)010A(2)E100 47.0 10.0 100 1285 1157 514 1.0
10 470 X/7343-43 T495X477(M)010A(2)E200 47.0 10.0 200 908 817 363 1.0
10 470 E/7260-38 T495E477(1)010A(2)E040 47.0 10.0 40 2236 2012 894 1.0
10 470 E/7260-38 T495E477(1)010A(2)E060 47.0 10.0 60 1826 1643 730 1.0
10 470 E/7260-38 T495E477(1)010A(2)E100 47.0 10.0 100 1414 1273 566 1.0
16 3.3 A/3216-18 T495A335(1)016A(2)E3K0 0.5 6.0 3000 158 142 63 1.0
16 4.7 A/3216-18 T495A475(1)016A(2)E2K0 0.8 6.0 2000 194 175 78 1.0
16 4.7 B/3528-20 T495B475(1)016A(2)E700 0.8 6.0 700 348 313 139 1.0
16 6.8 C/6032-28 T495C685(1)016A(2)E750 1.1 6.0 750 383 345 153 1.0
16 10 T/3528-12 T495T106(M)016A(2)E4K0 1.6 8.0 4000 132 119 53 1.0
16 15 A/3216-18 T495A156(1)016A(2)E2K5 2.4 8.0 2500 173 156 69 1.0
16 15 B/3528-20 T495B156(1)016A(2)E800 2.4 6.0 800 326 293 130 1.0
16 33 C/6032-28 T495C336(1)016A(2)E200 5.3 6.0 200 742 668 297 1.0
16 33 C/6032-28 T495C336(1)016A(2)E225 5.3 6.0 225 699 629 280 1.0
16 33 C/6032-28 T495C336(1)016A(2)E275 5.3 6.0 275 632 569 253 1.0
16 33 D/7343-31 T495D336(1)016A(2)E150 5.3 6.0 150 1000 900 400 1.0
16 33 D/7343-31 T495D336(1)016A(2)E175 5.3 6.0 175 926 833 370 1.0
16 33 D/7343-31 T495D336(1)016A(2)E225 5.3 4.0 225 816 734 326 1.0
16 33 D/7343-31 T495D336(1)016A(2)4095 5.3 4.0 250 775 698 310 1.0
16 47 C/6032-28 T495C476(1)016A(2)E350 7.5 6.0 350 561 505 224 1.0
16 47 D/7343-31 T495D476(1)016A(2)E080 7.5 6.0 80 1369 1232 548 1.0
16 47 D/7343-31 T495D476(1)016A(2)E100 7.5 6.0 100 1225 1103 490 1.0
16 47 D/7343-31 T495D476(1)016A(2)E150 7.5 6.0 150 1000 900 400 1.0
16 47 D/7343-31 T495D476(1)016A(2)4095 7.5 6.0 200 866 779 346 1.0
VDC
µF
KEMET/EIA (See below for
part options)
µAmps
mOhms
mAmps
mAmps
mAmps
J-STD-020A
85ºC
120Hz
+25ºC
+25ºC 100kHz
+45ºC 100kHz
+85ºC 100kHz
+105ºC 100kHz
Temp≤260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum allowable
ripple current
Moisture
Sensitivity
Roll Over for
Order Info.
T 495 X 107 M 010 A T E045
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Code Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low ESR
A = 3216-18
B = 3258-19
C = 6032-25
D = 7343-31
E = 7260-38
T = 3258-12
V = 7343-20
X = 7343-43
First two digits
represent
signi cant
gures. Third
digit speci es
number of zeros.
K = ±10%
M = ±20%
2R5 = 2.5V
004 = 4V
006 = 6.3V
010 = 10V
016 = 16V
020 = 20V
025 = 25V
035 = 35V
050 = 50V
A = N/A
Z = N/A
T = 100% Matte
Tin (Sn) Plated*
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
G = Gold Plated (A,
B, C, D, X only)
E = ESR
Last three digits
specify ESR in
mOhms. (045 =
45mOhms)
Blank = 7" Reel
7280 = 13" Reel
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 99
Low ESR MnO2 Tantalum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Other part number options:
Where the 10th character equal to K (10% tolerance) is also available in M (20% tolerance).
Where the 10th character equal to M (20% tolerance) is only available in M (20% tolerance).
Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H)
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Table 1 – Ratings & Part Number Reference con't
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
85ºC
120Hz
KEMET/EIA (See below for
part options)
+25ºC
+25ºC 100kHz
+25ºC 100kHz
+85ºC 100kHz
+125ºC 100kHz
Temp≤260ºC
VDC
µF
µAmps
mOhms
mAmps
mAmps
mAmps
J-STD-020D
16 68 V/7343-19 T495V686(1)016A(2)E180 10.9 6.0 180 833 750 333 1.0
16 68 V/7343-19 T495V686(1)016A(2)E300 10.9 6.0 300 645 581 258 1.0
16 68 D/7343-31 T495D686(1)016A(2)E070 10.9 6.0 70 1464 1318 586 1.0
16 68 D/7343-31 T495D686(1)016A(2)E100 10.9 6.0 100 1225 1103 490 1.0
16 68 D/7343-31 T495D686(1)016A(2)E150 10.9 6.0 150 1000 900 400 1.0
16 100 D/7343-31 T495D107(1)016A(2)E100 16.0 8.0 100 1225 1103 490 1.0
16 100 D/7343-31 T495D107(1)016A(2)E125 16.0 8.0 125 1095 986 438 1.0
16 100 X/7343-43 T495X107(1)016A(2)E080 16.0 8.0 80 1436 1292 574 1.0
16 100 X/7343-43 T495X107(1)016A(2)E100 16.0 8.0 100 1285 1157 514 1.0
16 100 X/7343-43 T495X107(1)016A(2)4095 16.0 8.0 125 1149 1034 460 1.0
16 150 D/7343-31 T495D157(M)016A(2)E060 24.0 12.0 60 1581 1423 632 1.0
16 150 D/7343-31 T495D157(M)016A(2)E085 24.0 8.0 85 1328 1195 531 1.0
16 150 D/7343-31 T495D157(M)016A(2)E100 24.0 8.0 100 1225 1103 490 1.0
16 150 D/7343-31 T495D157(1)016A(2)E125 24.0 8.0 125 1095 986 438 1.0
16 150 D/7343-31 T495D157(1)016A(2)E150 24.0 8.0 150 1000 900 400 1.0
16 150 X/7343-43 T495X157(1)016A(2)E075 24.0 8.0 75 1483 1335 593 1.0
16 150 X/7343-43 T495X157(1)016A(2)E100 24.0 8.0 100 1285 1157 514 1.0
16 220 X/7343-43 T495X227(1)016A(2)E100 35.2 8.0 100 1285 1157 514 1.0
16 220 E/7260-38 T495E227(1)016A(2)E050 35.2 12.0 50 2000 1800 800 1.0
16 220 E/7260-38 T495E227(1)016A(2)E075 35.2 8.0 75 1633 1470 653 1.0
16 220 E/7260-38 T495E227(1)016A(2)E100 35.2 7.2 100 1414 1273 566 1.0
16 220 E/7260-38 T495E227(1)016A(2)E150 35.2 7.2 150 1155 1040 462 1.0
20 1 A/3216-18 T495A105(1)020A(2)E3K0 0.2 4.0 3000 158 142 63 1.0
20 10 B/3528-20 T495B106(1)020A(2)E1K0 2.0 6.0 1000 292 263 117 1.0
20 10 C/6032-28 T495C106(1)020A(2)E400 2.0 6.0 400 524 472 210 1.0
20 10 C/6032-28 T495C106(1)020A(2)E475 2.0 6.0 475 481 433 192 1.0
20 15 C/6032-28 T495C156(1)020A(2)E375 3.0 6.0 375 542 488 217 1.0
20 15 D/7343-31 T495D156(1)020A(2)E275 3.0 4.0 275 739 665 296 1.0
20 15 D/7343-31 T495D156(1)020A(2)4095 3.0 4.0 275 739 665 296 1.0
20 22 D/7343-31 T495D226(1)020A(2)E180 4.4 4.0 180 913 822 365 1.0
20 22 D/7343-31 T495D226(1)020A(2)E225 4.4 4.0 225 816 734 326 1.0
20 22 D/7343-31 T495D226(1)020A(2)4095 4.4 4.0 275 739 665 296 1.0
20 33 D/7343-31 T495D336(1)020A(2)E100 6.6 6.0 100 1225 1103 490 1.0
20 33 D/7343-31 T495D336(1)020A(2)E150 6.6 6.0 150 1000 900 400 1.0
20 33 D/7343-31 T495D336(1)020A(2)E200 6.6 6.0 200 866 779 346 1.0
20 47 D/7343-31 T495D476(1)020A(2)E075 9.4 6.0 75 1414 1273 566 1.0
20 47 D/7343-31 T495D476(1)020A(2)E100 9.4 6.0 100 1225 1103 490 1.0
20 47 D/7343-31 T495D476(1)020A(2)E175 9.4 6.0 175 926 833 370 1.0
20 47 X/7343-43 T495X476(1)020A(2)E065 9.4 8.0 65 1593 1434 637 1.0
20 47 X/7343-43 T495X476(1)020A(2)E100 9.4 6.0 100 1285 1157 514 1.0
20 47 X/7343-43 T495X476(1)020A(2)E125 9.4 6.0 125 1149 1034 460 1.0
20 47 X/7343-43 T495X476(1)020A(2)E150 9.4 4.0 150 1049 944 420 1.0
20 47 X/7343-43 T495X476(1)020A(2)4095 9.4 4.0 150 1049 944 420 1.0
20 68 D/7343-31 T495D686(1)020A(2)E070 13.6 8.0 70 1464 1318 586 1.0
20 68 D/7343-31 T495D686(1)020A(2)E150 13.6 8.0 150 1000 900 400 1.0
20 68 X/7343-43 T495X686(1)020A(2)E120 13.6 6.0 120 1173 1056 469 1.0
20 68 X/7343-43 T495X686(1)020A(2)E150 13.6 6.0 150 1049 944 420 1.0
20 68 X/7343-43 T495X686(1)020A(2)4095 13.6 6.0 150 1049 944 420 1.0
20 100 X/7343-43 T495X107(1)020A(2)E100 20.0 6.0 100 1285 1157 514 1.0
VDC
µF
KEMET/EIA (See below for
part options)
µAmps
mOhms
mAmps
mAmps
mAmps
J-STD-020A
85ºC
120Hz
+25ºC
+25ºC 100kHz
+45ºC 100kHz
+85ºC 100kHz
+105ºC 100kHz
Temp≤260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum allowable
ripple current
Moisture
Sensitivity
Roll Over for
Order Info.
T 495 X 107 M 010 A T E045
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Code Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low ESR
A = 3216-18
B = 3258-19
C = 6032-25
D = 7343-31
E = 7260-38
T = 3258-12
V = 7343-20
X = 7343-43
First two digits
represent
signi cant
gures. Third
digit speci es
number of zeros.
K = ±10%
M = ±20%
2R5 = 2.5V
004 = 4V
006 = 6.3V
010 = 10V
016 = 16V
020 = 20V
025 = 25V
035 = 35V
050 = 50V
A = N/A
Z = N/A
T = 100% Matte
Tin (Sn) Plated*
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
G = Gold Plated (A,
B, C, D, X only)
E = ESR
Last three digits
specify ESR in
mOhms. (045 =
45mOhms)
Blank = 7" Reel
7280 = 13" Reel
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 1010
Low ESR MnO2 Tantalum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Other part number options:
Where the 10th character equal to K (10% tolerance) is also available in M (20% tolerance).
Where the 10th character equal to M (20% tolerance) is only available in M (20% tolerance).
Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H)
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Table 1 – Ratings & Part Number Reference con't
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
85ºC
120Hz
KEMET/EIA (See below for
part options)
+25ºC
+25ºC 100kHz
+25ºC 100kHz
+85ºC 100kHz
+125ºC 100kHz
Temp≤260ºC
VDC
µF
µAmps
mOhms
mAmps
mAmps
mAmps
J-STD-020D
20 100 X/7343-43 T495X107(1)020A(2)E150 20.0 8.0 150 1049 944 420 1.0
20 100 E/7260-38 T495E107(1)020A(2)E060 20.0 8.0 60 1826 1643 730 1.0
20 100 E/7260-38 T495E107(1)020A(2)E085 20.0 8.0 85 1534 1381 614 1.0
20 100 E/7260-38 T495E107(1)020A(2)E100 20.0 8.0 100 1414 1273 566 1.0
20 100 E/7260-38 T495E107(1)020A(2)E200 20.0 8.0 200 1000 900 400 1.0
20 150 E/7260-38 T495E157(1)020A(2)E080 30.0 8.0 80 1581 1423 632 1.0
25 0.47 A/3216-18 T495A474(1)025A(2)E4K5 0.1 4.0 4500 129 116 52 1.0
25 2.2 C/6032-28 T495C225(1)025A(2)E1K3 0.6 6.0 1300 291 262 116 1.0
25 3.3 C/6032-28 T495C335(1)025A(2)E750 0.8 6.0 750 383 345 153 1.0
25 4.7 C/6032-28 T495C475(1)025A(2)E575 1.2 6.0 575 437 393 175 1.0
25 6.8 B/3528-20 T495B685(1)025A(2)E1K5 1.7 6.0 1500 238 214 95 1.0
25 6.8 C/6032-28 T495C685(1)025A(2)E400 1.7 6.0 400 524 472 210 1.0
25 6.8 C/6032-28 T495C685(1)025A(2)E490 1.7 6.0 490 474 427 190 1.0
25 6.8 C/6032-28 T495C685(1)025A(2)E500 1.7 6.0 500 469 422 188 1.0
25 10 C/6032-28 T495C106(1)025A(2)E275 2.5 6.0 275 632 569 253 1.0
25 10 C/6032-28 T495C106(1)025A(2)E300 2.5 6.0 300 606 545 242 1.0
25 10 C/6032-28 T495C106(1)025A(2)E450 2.5 6.0 450 494 445 198 1.0
25 15 D/7343-31 T495D156(1)025A(2)E100 3.8 6.0 100 1225 1103 490 1.0
25 15 D/7343-31 T495D156(1)025A(2)E275 3.8 6.0 275 739 665 296 1.0
25 15 D/7343-31 T495D156(1)025A(2)4095 3.8 6.0 275 739 665 296 1.0
25 15 X/7343-43 T495X156(1)025A(2)E200 3.8 4.0 200 908 817 363 1.0
25 15 X/7343-43 T495X156(1)025A(2)4095 3.8 4.0 200 908 817 363 1.0
25 22 C/6032-28 T495C226(1)025A(2)E275 5.5 6.0 275 632 569 253 1.0
25 22 C/6032-28 T495C226(1)025A(2)E300 5.5 8.0 300 606 545 242 1.0
25 22 C/6032-28 T495C226(1)025A(2)E900 5.5 6.0 900 350 315 140 1.0
25 22 D/7343-31 T495D226(1)025A(2)E200 5.5 6.0 200 866 779 346 1.0
25 22 X/7343-43 T495X226(1)025A(2)E225 5.5 4.0 225 856 770 342 1.0
25 22 X/7343-43 T495X226(1)025A(2)4095 5.5 4.0 225 856 770 342 1.0
25 33 D/7343-31 T495D336(1)025A(2)E090 8.3 6.0 90 1291 1162 516 1.0
25 33 D/7343-31 T495D336(1)025A(2)E100 8.3 6.0 100 1225 1103 490 1.0
25 33 D/7343-31 T495D336(1)025A(2)E225 8.3 6.0 225 816 734 326 1.0
25 33 D/7343-31 T495D336(1)025A(2)E300 8.3 6.0 300 707 636 283 1.0
25 33 X/7343-43 T495X336(1)025A(2)E100 8.3 4.0 100 1285 1157 514 1.0
25 33 X/7343-43 T495X336(1)025A(2)E175 8.3 4.0 175 971 874 388 1.0
25 33 X/7343-43 T495X336(1)025A(2)E200 8.3 4.0 200 908 817 363 1.0
25 33 X/7343-43 T495X336(1)025A(2)4095 8.3 4.0 175 971 874 388 1.0
25 47 X/7343-43 T495X476(M)025A(2)E080 11.8 8.0 80 1436 1292 574 1.0
25 47 X/7343-43 T495X476(M)025A(2)E150 11.8 6.0 150 1049 944 420 1.0
25 47 X/7343-43 T495X476(M)025A(2)E185 11.8 8.0 185 944 850 378 1.0
25 47 X/7343-43 T495X476(M)025A(2)E200 11.8 6.0 200 908 817 363 1.0
25 47 D/7343-31 T495D476(M)025A(2)E120 11.8 10.0 120 1118 1006 447 1.0
25 47 D/7343-31 T495D476(1)025A(2)E250 11.8 10.0 250 775 698 310 1.0
25 68 D/7343-31 T495D686(1)025A(2)E150 17.0 10.0 150 1000 900 400 1.0
25 68 D/7343-31 T495D686(1)025A(2)E200 17.0 10.0 200 866 779 346 1.0
25 68 X/7343-43 T495X686(1)025A(2)E125 17.0 8.0 125 1149 1034 460 1.0
25 68 X/7343-43 T495X686(1)025A(2)E150 17.0 8.0 150 1049 944 420 1.0
25 68 X/7343-43 T495X686(1)025A(2)E200 17.0 8.0 200 908 817 363 1.0
25 100 E/7260-38 T495E107(1)025A(2)E100 25.0 8.0 100 1414 1273 566 1.0
VDC
µF
KEMET/EIA (See below for
part options)
µAmps
mOhms
mAmps
mAmps
mAmps
J-STD-020A
85ºC
120Hz
+25ºC
+25ºC 100kHz
+45ºC 100kHz
+85ºC 100kHz
+105ºC 100kHz
Temp≤260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum allowable
ripple current
Moisture
Sensitivity
Roll Over for
Order Info.
T 495 X 107 M 010 A T E045
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Code Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low ESR
A = 3216-18
B = 3258-19
C = 6032-25
D = 7343-31
E = 7260-38
T = 3258-12
V = 7343-20
X = 7343-43
First two digits
represent
signi cant
gures. Third
digit speci es
number of zeros.
K = ±10%
M = ±20%
2R5 = 2.5V
004 = 4V
006 = 6.3V
010 = 10V
016 = 16V
020 = 20V
025 = 25V
035 = 35V
050 = 50V
A = N/A
Z = N/A
T = 100% Matte
Tin (Sn) Plated*
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
G = Gold Plated (A,
B, C, D, X only)
E = ESR
Last three digits
specify ESR in
mOhms. (045 =
45mOhms)
Blank = 7" Reel
7280 = 13" Reel
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 1111
Low ESR MnO2 Tantalum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Other part number options:
Where the 10th character equal to K (10% tolerance) is also available in M (20% tolerance).
Where the 10th character equal to M (20% tolerance) is only available in M (20% tolerance).
Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H)
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Table 1 – Ratings & Part Number Reference con't
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
85ºC
120Hz
KEMET/EIA (See below for
part options)
+25ºC
+25ºC 100kHz
+25ºC 100kHz
+85ºC 100kHz
+125ºC 100kHz
Temp≤260ºC
VDC
µF
µAmps
mOhms
mAmps
mAmps
mAmps
J-STD-020D
35 0.47 B/3528-20 T495B474(1)035A(2)E1K5 0.2 4.0 1500 238 214 95 1.0
35 0.47 B/3528-20 T495B474(1)035A(2)E2K2 0.2 4.0 2200 197 177 79 1.0
35 1 A/3216-18 T495A105(1)035A(2)E3K0 0.4 4.0 3000 158 142 63 1.0
35 1 B/3528-20 T495B105(1)035A(2)E1K5 0.4 4.0 1500 238 214 95 1.0
35 1 B/3528-20 T495B105(1)035A(2)E1K7 0.4 4.0 1700 224 202 90 1.0
35 2.2 B/3528-20 T495B225(1)035A(2)E1K5 0.8 6.0 1500 238 214 95 1.0
35 2.2 C/6032-28 T495C225(1)035A(2)E750 0.8 6.0 750 383 345 153 1.0
35 3.3 B/3528-20 T495B335(1)035A(2)E900 1.2 6.0 900 307 276 123 1.0
35 3.3 C/6032-28 T495C335(1)035A(2)E525 1.2 6.0 525 458 412 183 1.0
35 3.3 C/6032-28 T495C335(1)035A(2)E550 1.2 6.0 550 447 402 179 1.0
35 3.3 C/6032-28 T495C335(1)035A(2)E600 1.2 6.0 600 428 385 171 1.0
35 4.7 B/3528-20 T495B475(1)035A(2)E1K0 1.6 6.0 1000 292 263 117 1.0
35 4.7 C/6032-28 T495C475(1)035A(2)E450 1.6 6.0 450 494 445 198 1.0
35 4.7 C/6032-28 T495C475(1)035A(2)E500 1.6 6.0 500 469 422 188 1.0
35 4.7 C/6032-28 T495C475(1)035A(2)E600 1.6 6.0 600 428 385 171 1.0
35 4.7 C/6032-28 T495C475(1)035A(2)4095 1.6 6.0 600 428 385 171 1.0
35 6.8 D/7343-31 T495D685(1)035A(2)E150 2.4 6.0 150 1000 900 400 1.0
35 6.8 D/7343-31 T495D685(1)035A(2)E400 2.4 6.0 400 612 551 245 1.0
35 6.8 X/7343-43 T495X685(1)035A(2)E300 2.4 4.0 300 742 668 297 1.0
35 6.8 X/7343-43 T495X685(1)035A(2)4095 2.4 4.0 300 742 668 297 1.0
35 10 D/7343-31 T495D106(1)035A(2)E125 3.5 6.0 125 1095 986 438 1.0
35 10 D/7343-31 T495D106(1)035A(2)E250 3.5 6.0 250 775 698 310 1.0
35 10 D/7343-31 T495D106(1)035A(2)E300 3.5 6.0 300 707 636 283 1.0
35 10 D/7343-31 T495D106(1)035A(2)4095 3.5 4.0 300 707 636 283 1.0
35 10 X/7343-43 T495X106(1)035A(2)E175 3.5 6.0 175 971 874 388 1.0
35 10 X/7343-43 T495X106(1)035A(2)E200 3.5 6.0 200 908 817 363 1.0
35 10 X/7343-43 T495X106(1)035A(2)E250 3.5 4.0 250 812 731 325 1.0
35 10 X/7343-43 T495X106(1)035A(2)4095 3.5 4.0 250 812 731 325 1.0
35 15 D/7343-31 T495D156(1)035A(2)E225 5.3 6.0 225 816 734 326 1.0
35 15 D/7343-31 T495D156(1)035A(2)E300 5.3 6.0 300 707 636 283 1.0
35 15 X/7343-43 T495X156(1)035A(2)E200 5.3 6.0 200 908 817 363 1.0
35 15 X/7343-43 T495X156(1)035A(2)E225 5.3 6.0 225 856 770 342 1.0
35 15 X/7343-43 T495X156(1)035A(2)4095 5.3 6.0 225 856 770 342 1.0
35 22 D/7343-31 T495D226(1)035A(2)E125 7.7 6.0 125 1095 986 438 1.0
35 22 D/7343-31 T495D226(1)035A(2)E200 7.7 6.0 200 866 779 346 1.0
35 22 D/7343-31 T495D226(1)035A(2)E250 7.7 6.0 250 775 698 310 1.0
35 22 D/7343-31 T495D226(1)035A(2)E300 7.7 6.0 300 707 636 283 1.0
35 22 X/7343-43 T495X226(1)035A(2)E125 7.7 6.0 125 1149 1034 460 1.0
35 22 X/7343-43 T495X226(1)035A(2)E200 7.7 6.0 200 908 817 363 1.0
35 22 X/7343-43 T495X226(1)035A(2)E275 7.7 6.0 275 775 698 310 1.0
35 22 X/7343-43 T495X226(1)035A(2)4095 7.7 6.0 300 742 668 297 1.0
35 33 X/7343-43 T495X336(1)035A(2)E100 11.6 6.0 100 1285 1157 514 1.0
35 33 X/7343-43 T495X336(1)035A(2)E175 11.6 6.0 175 971 874 388 1.0
35 33 X/7343-43 T495X336(1)035A(2)E250 11.6 6.0 250 812 731 325 1.0
35 33 E/7260-38 T495E336(1)035A(2)E200 11.6 6.0 200 1000 900 400 1.0
35 47 X/7343-43 T495X476(1)035A(2)E185 16.5 8.0 185 944 850 378 1.0
35 47 X/7343-43 T495X476(1)035A(2)E200 16.5 8.0 200 908 817 363 1.0
35 47 X/7343-43 T495X476(1)035A(2)E300 16.5 8.0 300 742 668 297 1.0
50 1 C/6032-28 T495C105(1)050A(2)E1K3 0.5 4.0 1300 291 262 116 1.0
VDC
µF
KEMET/EIA (See below for
part options)
µAmps
mOhms
mAmps
mAmps
mAmps
J-STD-020A
85ºC
120Hz
+25ºC
+25ºC 100kHz
+45ºC 100kHz
+85ºC 100kHz
+105ºC 100kHz
Temp≤260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum allowable
ripple current
Moisture
Sensitivity
Roll Over for
Order Info.
T 495 X 107 M 010 A T E045
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Code Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low ESR
A = 3216-18
B = 3258-19
C = 6032-25
D = 7343-31
E = 7260-38
T = 3258-12
V = 7343-20
X = 7343-43
First two digits
represent
signi cant
gures. Third
digit speci es
number of zeros.
K = ±10%
M = ±20%
2R5 = 2.5V
004 = 4V
006 = 6.3V
010 = 10V
016 = 16V
020 = 20V
025 = 25V
035 = 35V
050 = 50V
A = N/A
Z = N/A
T = 100% Matte
Tin (Sn) Plated*
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
G = Gold Plated (A,
B, C, D, X only)
E = ESR
Last three digits
specify ESR in
mOhms. (045 =
45mOhms)
Blank = 7" Reel
7280 = 13" Reel
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 1212
Low ESR MnO2 Tantalum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Other part number options:
Where the 10th character equal to K (10% tolerance) is also available in M (20% tolerance).
Where the 10th character equal to M (20% tolerance) is only available in M (20% tolerance).
Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H)
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Table 1 – Ratings & Part Number Reference con't
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
85ºC
120Hz
KEMET/EIA (See below for
part options)
+25ºC
+25ºC 100kHz
+25ºC 100kHz
+85ºC 100kHz
+125ºC 100kHz
Temp≤260ºC
VDC
µF
µAmps
mOhms
mAmps
mAmps
mAmps
J-STD-020D
50 2.2 D/7343-31 T495D225(1)050A(2)E600 1.1 6.0 600 500 450 200 1.0
50 3.3 D/7343-31 T495D335(1)050A(2)E700 1.7 6.0 700 463 417 185 1.0
50 4.7 D/7343-31 T495D475(1)050A(2)E275 2.4 6.0 275 739 665 296 1.0
50 4.7 D/7343-31 T495D475(1)050A(2)E300 2.4 6.0 300 707 636 283 1.0
50 4.7 X/7343-43 T495X475(1)050A(2)E300 2.4 4.0 300 742 668 297 1.0
50 4.7 X/7343-43 T495X475(1)050A(2)4095 2.4 4.0 300 742 668 297 1.0
50 6.8 D/7343-31 T495D685(1)050A(2)E190 3.4 6.0 190 889 800 356 1.0
50 6.8 D/7343-31 T495D685(1)050A(2)E200 3.4 6.0 200 866 779 346 1.0
50 6.8 D/7343-31 T495D685(1)050A(2)E275 3.4 6.0 275 739 665 296 1.0
50 6.8 D/7343-31 T495D685(1)050A(2)E300 3.4 8.0 300 707 636 283 1.0
50 10 X/7343-43 T495X106(1)050A(2)E250 5.0 8.0 250 812 731 325 1.0
50 10 X/7343-43 T495X106(1)050A(2)E260 5.0 6.0 260 797 717 319 1.0
50 10 X/7343-43 T495X106(1)050A(2)E300 5.0 6.0 300 742 668 297 1.0
50 15 X/7343-43 T495X156(1)050A(2)E200 7.5 8.0 200 908 817 363 1.0
50 15 X/7343-43 T495X156(1)050A(2)E300 7.5 8.0 300 742 668 297 1.0
VDC
µF
KEMET/EIA (See below for
part options)
µAmps
mOhms
mAmps
mAmps
mAmps
J-STD-020A
85ºC
120Hz
+25ºC
+25ºC 100kHz
+45ºC 100kHz
+85ºC 100kHz
+105ºC 100kHz
Temp≤260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum allowable
ripple current
Moisture
Sensitivity
Roll Over for
Order Info.
T 495 X 107 M 010 A T E045
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Code Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low ESR
A = 3216-18
B = 3258-19
C = 6032-25
D = 7343-31
E = 7260-38
T = 3258-12
V = 7343-20
X = 7343-43
First two digits
represent
signi cant
gures. Third
digit speci es
number of zeros.
K = ±10%
M = ±20%
2R5 = 2.5V
004 = 4V
006 = 6.3V
010 = 10V
016 = 16V
020 = 20V
025 = 25V
035 = 35V
050 = 50V
A = N/A
Z = N/A
T = 100% Matte
Tin (Sn) Plated*
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
G = Gold Plated (A,
B, C, D, X only)
E = ESR
Last three digits
specify ESR in
mOhms. (045 =
45mOhms)
Blank = 7" Reel
7280 = 13" Reel
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 1313
Low ESR MnO2 Tantalum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Recommended Voltage Derating Guidelines
Ripple Current/Ripple Voltage
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms
ripple current or voltage may be determined.
I(max) = √P max/R
E(max) = √P max*R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
Pmax = maximum power dissipation(watts)
R = ESR at specied frequency (ohms)
Case Code
Maximum Power Dissipation (Pmax)
mWatts @ 25°C w/+20°C Rise
KEMET EIA
A 3216-18 75
B 3528-21 85
C 6032-28 110
D 7343-31 150
X 7343-43 165
E 7260-38 200
R 2012-12 25
S 3216-12 60
T 3528-12 70
U 6032-15 90
V 7343-20 125
T510X 7343-43 270
T510E 7260-38 285
Temperature Compenstion Multipliers
for Maximum Power Dissipation
≤25°C 85°C 125°C
1.00 0.90 0.40
0%
20%
40%
60%
80%
100%
120%
-55 25 85 125
% Working Voltage
% Change in Working DC Voltage
with Temperature
Temperature (ºC)
67%
33%
Recommended Maximum
Application Voltage (As %
of Rated Voltage)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 1414
Low ESR MnO2 Tantalum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The
positive terminal is identied on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within
these limits.
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case EIA X Y C V1 V2 X Y C V1 V2 X Y C V1 V2
A 3216-18 1.35 2.15 1.45 6.10 2.80 1.25 1.75 1.35 5.00 2.30 1.15 1.35 1.25 4.10 2.00
B 3258-19 2.35 2.15 1.45 6.10 4.00 2.25 1.75 1.35 5.00 3.50 2.15 1.35 1.25 4.10 3.20
C 6032-25 2.35 2.65 2.60 8.90 4.40 2.25 2.25 2.50 7.80 3.90 2.15 1.85 2.40 6.90 3.60
D 7343-31 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70
E¹ 7260-38 4.25 2.65 3.20 10.10 7.20 4.15 2.25 3.30 9.40 6.70 4.05 1.85 3.00 8.10 6.40
T 3258-12 2.35 2.15 1.45 6.10 4.00 2.25 1.75 1.35 5.00 3.50 2.15 1.35 1.25 4.10 3.20
V 7343-20 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70
X¹ 7343-43 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reow solder
processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform qualication
testing based on the conditions outlined in IPC standard 7351 (IPC-7351).
¹ Height of these chips may create problems in wave soldering.
² Land pattern geometry is too small for silkscreen outline.
Temperature Permissible Transient Reverse Voltage
25° C 15% of Rated Voltage
85° C 5% of Rated Voltage
125° C 1% of Rated Voltage
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 1515
Low ESR MnO2 Tantalum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Time
Temperature
T
smin
25° C to Peak
t
L
t
S
25
t
P
T
smax
T
L
T
P
Max Ramp Up Rate = 3° C/sec
Max Ramp Down Rate = 6° C/sec
Soldering Process
KEMET’s families of surface mount tantalum capacitors are
compatible with wave (single or dual), convection, IR or vapor
phase reow techniques. Preheating of these components
is recommended to avoid extreme thermal stress. KEMET's
recommended prole conditions for convection and IR reow reect
the prole conditions of the IPC/J-STD-020D standard for moisture
sensitivety testing. The devices can safely withstand a maximum of
three reow passes at these conditions.
Note that although the X/7343-43 case size can withstand wave
soldering, the tall prole (4.3mm maximum) dictates care in wave
process development.
Time/Temperature Soldering Prole
Prole Feature Sn-Pb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Min (TSmin) 100°C 150°C
Temperature Max (TSmax) 150°C 200°C
Time (ts) from Tsmin to Tsmax) 60-120 sec 60-120 sec
Ramp-up rate (TL to TP) 3°C/sec max 3°C/sec max
Liquidous temperature (TL) 183°C 217°C
Time above liquidous (tL) 60-150 sec 60-150 sec
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Time within 5°C of max peak
temperature (t
P
)20 sec max 30 sec max
Ramp-down rate (TP to TL) 6°C/sec max 6°C/sec max
Time 25°C to peak temperature 6 minutes max 8 minutes max
Note 1: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reow.
* Case Size D, E, P, Y and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W and Z
Construction
MNO2 /Ta2O5/Ta Silver Adhesive
Carbon
Silver Paint Washer
Tantalum Wire
Weld
Leadframe
(-Cathode) Leadframe
(+Anode)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 1616
Low ESR MnO2 Tantalum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Capacitor Marking
C, D, X Case Sizes
A Case Size B or C Case Sizes
PWC*
Year Month
V = 2008 1 = Jan 7 = Jul
W = 2008 2 = Feb 8 = Aug
X = 2009 3 = Mar 9 = Spt
A = 2010 4 = Apr O = Oct
B = 2011 5 = May N = Nov
C = 2012 6 = Jun D = Dec
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature - reels may soften or warp, and tape peel force may
increase. KEMET recommends that maximum storage temperature not exceed 40 degrees C, and maximum storage humidity not
exceed 60% relative humidity. In addition, temperature uctuations should be minimized to avoid condensation on the parts, and
atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability, chip stock should be used
promptly, preferably within three years of receipt.
KEMET
Surge
Robust
MnO2
Rated
Voltage
156
25 K
030
R+ Polarity
Indicator (+)
Picofarad Code
KEMET ID
PWC*
* 010 = 30
th
week of 2010
KEMET
Industrial
Grade
MnO2
Rated
Voltage
156
25V
Polarity
Indicator (+)
Picofarad Code
KEMET ID
PWC*
K
A6 49 Internal Code
KEMET
Industrial
Grade
MnO2
PWC*
A 155
A1 49
Polarity
Indicator (+)
Voltage
KEMET ID
Internal Code
K
Picofarad Code
KEMET
Industrial
Grade
MnO2
PWC*
226
35V
A1 49
Polarity
Indicator (+)
Picofarad Code
KEMET ID
Internal Code
K
Voltage
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 1717
Low ESR MnO2 Tantalum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Tape & Reel Packaging Information
KEMET’s Molded Tantalum and Aluminum Chip Capacitor families
are packaged in 8 mm and 12 mm plastic tape on 7" and 13"
reels, in accordance with EIA Standard 481-1: Taping of Surface
Mount Components for Automatic Handling. This packaging
system is compatible with all tape fed automatic pick and place
systems.
Table 4 – Packaging Quantity
Case Code Tape
Width-mm 7" Reel* 13" Reel*
KEMET EIA
R
2012-12
8
2,500
10,000
I
3216-10
8
3,000
12,000
S
3216-12
8
2,500
10,000
T
3528-12
8
2,500
10,000
M
3528-15
8
2,000
8,000
U
6032-15
12
1,000
5,000
L
6032-19
12
1,000
5,000
W
7343-15
12
1,000
3,000
Z
7343-17
12
1,000
3,000
V
7343-20
12
1,000
3,000
A
3216-18
8
2,000
9,000
B
3528-21
8
2,000
8,000
C
6032-28
12
500
3,000
D
7343-31
12
500
2,500
Y
7343-40
12
500
2,000
X
7343-43
12
500
2,000
E
7260-38
12
500
2,000
* No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 1818
Low ESR MnO2 Tantalum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
Table 5 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size D0
D
1
Min.
Note 1 E1P0 P2
R Ref.
Note 2
S
1
Min.
Note 3 T Max. T1 Max.
8mm
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
1.0
(0.039)
1.75 ± 0.10
(0.069 ± 0.004)
4.0 ± 0.10
(0.157 ± 0.004)
2.0 ± 0.05
(0.079 ± 0.002)
25.0
(0.984)
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
12mm 1.5
(0.059)
30
(1.181)
16mm
Variable Dimensions — Millimeters (Inches)
Tape Size Pitch
B
1
Max.
Note 4
E2 Min. F P1 T2 Max W Max A0,B0 & K0
8mm Single (4mm) 4.35
(0.171)
6.25
(0.246)
3.5 ± 0.05
(0.138 ± 0.002)
4.0 ± 0.10
(0.157 ± 0.004)
2.5
(0.098)
8.3
(0.327)
Note 512mm
Single (4mm) &
Double (8mm)
8.2
(0.323)
10.25
(0.404)
5.5 ± 0.05
(0.217 ± 0.002)
8.0 ± 0.10
(0.315 ± 0.004)
4.6
(0.181)
12.3
(0.484)
16mm Triple (12mm) 12.1
(0.476)
14.25
(0.561)
5.5 ± 0.05
(0.217 ± 0.002)
8.0 ± 0.10
(0.315 ± 0.004)
4.6
(0.181)
16.3
(0.642)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape with or without components shall pass around R without damage (see Figure 5).
3. If S1<1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Document 481 paragraph 4.3 (b)).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity de ned by A0, B0 and K0 shall surround the component with suf cient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12mm tapes and 10° maximum for 16mm tapes (see Figure 3).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8mm and 12mm wide tape and to 1.0mm maximum for 16mm tape (see Figure 4).
(e) for KPS Series product A0 and B0 are measured on a plane 0.3mm above the bottom of the pocket.
(f) see Addendum in EIA Document 481 for standards relating to more precise taping requirements.
Po
T
F
W
Center Lines of Cavity
Ao
Bo
User Direction of Unreeling
Cover Tape
Ko
B
1
is for tape feeder reference only,
including draft concentric about B
o
.
T
2
ØD
1
ØDo
B
1
S
1
T
1
E
1
E
2
P
1
P
2
Embossment
For cavity size,
see Note 1 Table 5
[10 pitches cumulative
tolerance on tape ±0.2 mm]
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 1919
Low ESR MnO2 Tantalum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg Minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the
carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556 and EIA-624.
Figure 3 – Maximum Component Rotation
Ao
Bo
°
T
°
s
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Tape Maximum
Width (mm) Rotation ( °
T)
8,12 20
16-200 10 Tape Maximum
Width (mm) Rotation ( °
S)
8,12 20
16-56 10
72-200 5
Typical Pocket Centerline
Typical Component Centerline
Figure 4 – Maximum Lateral Movement
0.5 mm maximum
0.5 mm maximum
8mm & 12mm Tape
1.0 mm maximum
1.0 mm maximum
16mm Tape
Figure 5 – Bending Radius
RR
Bending
Radius
Embossed
Carrier
Punched
Carrier
Tape Width Peel Strength
8mm 0.1 Newton to 1.0 Newton (10gf to 100gf)
12mm & 16mm 0.1 Newton to 1.3 Newton (10gf to 130gf)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 2020
Low ESR MnO2 Tantalum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Figure 6 – Reel Dimensions
Table 7 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size A B Min C D Min
8mm
178 ± 0.20
(7.008 ± 0.008)
or
330 ± 0.20
(13.000 ± 0.008)
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
20.2
(0.795)
12mm
16mm
Variable Dimensions — Millimeters (Inches)
Tape Size N Min W1 W2 Max W3
8mm
50
(1.969)
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
14.4
(0.567)
Shall accommodate tape width
without interference
12mm
12.4 +2.0/-0.0
(0.488 +0.078/-0.0)
18.4
(0.724)
16mm
16.4 +2.0/-0.0
(0.646 +0.078/-0.0)
22.4
(0.882)
AD(See Note)
Full Radius,
See Note
B(see Note)
Access Hole at
Slot Location
(Ø 40 mm min.)
If present,
tape slot in core
for tape start:
2.5 mm min. width x
10.0 mm min. depth
W3(Includes
flange distortion
at outer edge)
W2(Measured at hub)
W1(Measured at hub)
C
(Arbor hole
diameter)
Note: Drive spokes optional; if used, dimensions B and D shall apply.
N
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 2121
Low ESR MnO2 Tantalum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Figure 7 – Tape Leader & Trailer Dimensions
Trailer
160 mm minimum,
Carrier Tape
END START
Round Sprocket Holes
Elongated Sprocket Holes
(32 mm tape and wider)
Top Cover Tape
Top Cover Tape
Punched Carrier
8 mm & 12 mm only
Embossed Carrier
Components
100 mm Min.
Leader
400 mm Minimum,
Figure 8 – Maximum Camber
Carrier Tape
Round Sprocket Holes
1 mm maximum, either direction
Straight Edge
250 mm
Elongated sprocket holes
(32 mm & wider tapes)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 2222
Low ESR MnO2 Tantalum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Other KEMET Resources
Disclaimer
All product speci cations, statements, information and data (collectively, the “Information”) are subject to change without notice.
All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we
speci cally disclaim – any warranty concerning suitability for a speci c customer application or use. This Information is intended for use only by customers who have the requisite
experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the
use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur.
Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or
redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not
be required.
Tools
Resource Location
Con gure A Part: CapEdge http://capacitoredge.kemet.com
SPICE & FIT Software http://www.kemet.com/spice
Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask
Product Information
Resource Location
Products http://www.kemet.com/products
Technical Resources (Including Soldering
Techniques) http://www.kemet.com/technicalpapers
RoHS Statement http://www.kemet.com/rohs
Quality Documents http://www.kemet.com/qualitydocuments
Product Request
Resource Location
Sample Request http://www.kemet.com/sample
Engineering Kit Request http://www.kemet.com/kits
Contact
Resource Location
Website www.kemet.com
Contact Us http://www.kemet.com/contact
Investor Relations http://www.kemet.com/ir
Call Us 1-877-MyKEMET
Twitter http://twitter.com/kemetcapacitors
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009-1 • 10/15/2010 2323
Low ESR MnO2 Tantalum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
KEMET Corporation
World Headquarters
2835 KEMET Way
Simpsonville, SC 29681
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Corporate Of ces
Fort Lauderdale, FL
Tel: 954-766-2800
North America
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
West Chester, PA
Tel: 610-692-4642
Central
Schaumburg, IL
Tel: 847-882-3590
Carmel, IN
Tel: 317-706-6742
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Zapopan, Jalisco
Tel: 52-33-3123-2141
Europe
Southern Europe
Geneva, Switzerland
Tel: 41-22-715-0100
Paris, France
Tel: 33-1-4646-1009
Sasso Marconi, Italy
Tel: 39-051-939111
Milan, Italy
Tel: 39-02-57518176
Rome, Italy
Tel: 39-06-23231718
Madrid, Spain
Tel: 34-91-804-4303
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Dortmund, Germany
Tel: 49-2307-3619672
Kwidzyn, Poland
Tel: 48-55-279-7025
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-757201
Weymouth, United Kingdom
Tel: 44-1305-830747
Coatbridge, Scotland
Tel: 44-1236-434455
Färjestaden, Sweden
Tel: 46-485-563934
Espoo, Finland
Tel: 358-9-5406-5000
Asia
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Shenzhen, China
Tel: 86-755-2518-1306
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.