CPL03R0105FE313 - Vishay Presicion Group

www.vishay.com For technical questions, contact: ww2aresistors@vishay.com Document Number: 30212

54 Revision: 10-May-11

This document is subject to change without notice.

THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

CPL

Vishay Dale

Wirewound Resistors, Commercial Power, Axial Lead, Low Value

FEATURES

• High power to size ratio

• Low inductance, less than 5 nH

• Ceramic cases are available with circuit board

stand-offs (designated with a -3 model ending)

• Superior surge capability

• Extremely low resistance values

• Complete welded construction

• Special inorganic potting compound and

ceramic case provide high thermal conductivity

in a fireproof package

• Compliant to RoHS Directive 2002/95/EC

Note

(1) Resistance is measured 3/8" [9.52 mm] from resistor body.

STANDARD ELECTRICAL SPECIFICATIONS

GLOBAL

MODEL

HISTORICAL

MODEL

POWER RATING

P40 °C

RESISTANCE

RANGE 



TOLERANCE

± %

WEIGHT

(typical)

CPL03 CPL-3 3 0.01 to 0.10 1, 3, 5, 10 3.4

CPL03...3 CPL-3-3 3 0.01 to 0.10 1, 3, 5, 10 3.6

CPL05 CPL-5 5 0.01 to 0.10 1, 3, 5, 10 4.8

CPL05...3 CPL-5-3 5 0.01 to 0.10 1, 3, 5, 10 5.0

CPL07 CPL-7 7 0.01 to 0.10 1, 3, 5, 10 6.8

CPL07...3 CPL-7-3 7 0.01 to 0.10 1, 3, 5, 10 7.0

CPL10 CPL-10 10 0.01 to 0.10 1, 3, 5, 10 9.5

CPL10...3 CPL-10-3 10 0.01 to 0.10 1, 3, 5, 10 9.9

CPL15 CPL-15 15 0.01 to 0.10 1, 3, 5, 10 16.8

CPL15...3 CPL-15-3 15 0.01 to 0.10 1, 3, 5, 10 17.4

TECHNICAL SPECIFICATIONS

PARAMETER UNIT CPL RESISTOR CHARACTERISTICS

Temperature Coefficient ppm/°C ± 300

Short Time Overload - 5 x rated power for 5 s

Maximum Working Voltage V (P x R)1/2

Operating Temperature Range °C - 65 to + 275

Terminal Strength lb 10 minimum

Dielectric Withstanding Voltage VAC 1000

GLOBAL PART NUMBER INFORMATION

Global Part Numbering example: CPL05R0500JB143

GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL

CPL03

CPL05

CPL07

CPL10

CPL15

R = Decimal

R1000 = 0.10 

F = ± 1.0 %

G = ± 2.0 %

H = ± 3.0 %

J = ± 5.0 %

K = ± 10.0 %

E14 = Lead (Pb)-free bulk

E31 = Lead (Pb)-free four layer bulk

E01 = Lead (Pb)-free skin pack

(Dash Number)

(up to 3 digits)

From 1 to 999

as applicable

B14 = Tin/lead bulk

B31 = Tin/lead four layer bulk

J01 = Tin/lead skin pack

Historical Part Numbering example: CPL-5-3 0.05  5 % B14

CPL-5-3 0.05 5 % B14

HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING

* Pb containing terminations are not RoHS compliant, exemptions may apply

** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902

B143PL05R0500JC

Document Number: 30212 For technical questions, contact: ww2aresistors@vishay.com www.vishay.com

Revision: 10-May-11 55

This document is subject to change without notice.

THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

CPL

Wirewound Resistors, Commercial Power,

Axial Lead, Low Value Vishay Dale

DIMENSIONS in inches [millimeters]

Note

(1) Potting compound may extend outside of ceramic case up to 0.060 [1.52] maximum per side.

MATERIAL SPECIFICATIONS

Element: Self-supporting copper-nickel alloy or nickel-

chrome alloy, depending on resistance range

Body: Steatite ceramic case with inorganic potting

compound

Terminals: Tinned copper

Part Marking: Dale, model, wattage, value, tolerance, date

code

DERATING

GLOBAL

MODEL

DIMENSIONS in inches [millimeters]

A (1)

± 0.031 [0.794]

± 0.001 [0.025]

CPL03 0.875 [22.22] 0.313 [7.94] 0.313 [7.94] - 0.036 [0.914]

CPL03...3 0.875 [22.22] 0.313 [7.94] 0.313 [7.94] 0.375 [9.52] 0.036 [0.914]

CPL05 0.875 [22.22] 0.375 [9.52] 0.344 [8.73] - 0.036 [0.914]

CPL05...3 0.875 [22.22] 0.375 [9.52] 0.344 [8.73] 0.406 [10.32] 0.036 [0.914]

CPL07 1.391 [35.32] 0.375 [9.52] 0.344 [8.73] - 0.036 [0.914]

CPL07...3 1.391 [35.32] 0.375 [9.52] 0.344 [8.73] 0.469 [11.91] 0.036 [0.914]

CPL10 1.875 [47.62] 0.375 [9.52] 0.344 [8.73] - 0.036 [0.914]

CPL10...3 1.875 [47.62] 0.375 [9.52] 0.344 [8.73] 0.469 [11.91] 0.036 [0.914]

CPL15 1.875 [47.62] 0.500 [12.70] 0.500 [12.70] - 0.036 [0.914]

CPL15...3 1.875 [47.62] 0.500 [12.70] 0.500 [12.70] 0.625 [15.87] 0.036 [0.914]

CPLxx

1.0 [25.4]

minimum

0.125 [3.18]

typical

1.0 [25.4]

minimum

CPLxx...3

- 65 - 25 25 75 125 175 225 275

AMBIENT TEMPERATURE IN

°C

% N I R

O P

D E

100

120

PERFORMANCE

TEST CONDITIONS OF TEST TEST LIMITS (EIA RS-344)

Thermal Shock - 55 °C to + 275 °C, 5 cycles, 30 min dwell time ± (5.0 % + 0.05 ) R

Short Time Overload 5 x rated power for 5 s ± (4.0 % + 0.05 ) R

Dielectric Withstanding Voltage 1000 VRMS for 1 min ± (2.0 % + 0.05 ) R

Low Temperature Operation - 65 °C, full rated working voltage for 45 min ± (3.0 % + 0.05 ) R

Bias Humidity 75 °C, 90 % to 100 % RH, 240 h ± (5.0 % + 0.05 ) R

Load Life 1000 h at rated power, + 40 °C, 1.5 h “ON”, 0.5 h “OFF” ± (5.0 % + 0.05 ) R

Terminal Strength 5 s to 10 s 10 pound pull test, torsion test - 3 alternating directions,

360° each ± (1.0 % + 0.05 ) R

Resistance to Solder Heat Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body ± (1.0 % + 0.05 ) R

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.