112x16 DOT GRAPHIC VFD Module Character Graphic ,Transformerless display Size compatible with U-Version Operating Temp -40C to +85C Single 5V Supply with Power Save Mode Smooth vertical/Horizontal scroll Proportional and scalable fonts 8 bit parallel & CMOS Serial interface Screen saver & window definition function 8 Level Brightness Control Function GU112X16G-7002 The module includes the Vacuum Fluorescent Display glass, driver and micro-controller ICs with refresh RAM, character generator and interface logic. This module have 8 bit parallel & CMOS syn. Or asyn. Serial Interface. The module can simultaneously display graphic pattern and / or characters on screen. 14 x 1.0 1 14 11.4 31.0 36.0 12.9 13.75 52.5 75.0 80.0 2.5 2.5 10.4 1.6 3.6 Dimensions in mm & subject to tolerances. Mounting holes 2.5mm dia. ELECTRICAL SPECIFICATION Parameter Symbol Power Supply Voltage VCC Power Supply Current ICC Logic High Input VIH Logic Low Input VIL Logic High Output VOH Logic Low Output VOL Value 5.0 VDC Max. 260mADC typ. 0.8VCC min. 0.2VCC max. 3.5VDC min. 0.6VDC max. COMMON FONT Condition GND=0V Vcc=5V VCC=5V VCC=5V IOH = -10.0uA IOL =4.0mA CHARACTER CODE (n=0) The power on rise time should be less than 50ms.The inrush current at power on can be 2 x ICC. The Icc current is 10mA maximum while in power down mode. OPTICAL and ENVIRONMENTAL SPECIFICATIONS Parameter Value PCB size/Display area ( in mm) 80x36 / 52.5x11.45 Dot Size/Pitch (XxY mm) 0.33x0.575/ 0.47x0.725 2 Luminance 700 cd/m (204 fL) Typ. Color of Illumination Blue-Green (Filter for more colors) Operating Temperature -40C to +85C Storage Temperature -40C to +85C Operating Humidity (non condensing) 20 to 80% RH @ 25C Software Commands Instruction Character display Cursor set Display clear Initialize display Specify International font Vertical scroll mode Horizontal scroll mode Brightness level Setting Scroll Display Action Code 20H-FFH 1FH 24H xL xH yL yH 0CH 1BH 40H 1BH 52H n 1FH 02H 1FH 03H 1FH 58H n 1FH 28H 61H 10H wL wH cL cH s Display Blank Screen Saver Bit Image Display group Font magnified Display 1FH 28H 61H 11H p t1 t2 c 1FH 28H 61H 40H p 1FH 28H 66H 11H xL xH 1FH 28H 67H 40H x y Parallel interface connector Pin Sig Pin Sig 1 Gnd 2 Vcc 3 NC 4 RS 5 /W 6 /RD 7 D0 8 D1 9 D2 10 D3 11 D4 12 D5 13 D6 14 D7 Serial Connector . Pin Asyn. Sig Syn. Sig 1 2 3 4 5 6 Vcc SIN Gnd SBUSY NC / RESET Vcc SIN Gnd SBUSY SCK / RESET CONTACT Noritake Sales Office Tel Nos Nagoya Japan: +81 (0)52-561-9867 Canada: +1-416-291-2946 Chicago USA: +1-847-439-9020 Munchen (D): +49 (0)89-3214-290 Itron UK: +44 (0)1493 601144 Rest Europe: +49 (0)61-0520-9220 www.noritake-elec.com Subject to change without notice PLEASE INQUIRE FOR FINAL SPECIFICATION