Customer Information sheet DRAWING No.: M50-360XX42P IF IN DOUBT - ASK NOT TO SCALE THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm mec | 27 x No. 1.27 x No. OF PITCHES PER ROW +0. 20 DM A > OF WAYS PER ROW +0.50=> SEE NOTE 2 DIM C 3.0040. 20 | | 680.20 |; | 1.00+0.10 | -= => | 3.40 le 5 50+0. 30 1.27 x No. OF = rit PER ROW CK E PLACE CAP 0.75 wale 1.27 TYP woe _ No OF WAYS | DIM *A | DIM B | DIM C 4709 1[5.08+0.20] 4.00 3.75 10 TO 50 6. 40 5.00 3. 30 RECOMMENDED 6. 5040 | PCB LAYOUT NOTES: 2.50 TYP | ALL TOLERANCES ARE +0.15 UNLESS OTHERWISE STATED. 2. CAP STYLE SHOWN MAY DIFFER FROM CAP SUPPLIED. 31-50 WAYS = 0.20mm. 3. CO-PLANARITY OF TAILS FOR 2 TO 30 WAYS = 0. 15mm, SPECIFICATIONS: MATERIAL: MOULDING = NYLON 6T, UL94V-0, BLACK PICK & PLACE CAP = NYLON 6T CONTACTS = BRASS FINISH: CONTACTS = 0.15 - 0.08p GOLD ON CONTACT AREA, 2.5 - 3.0p 100% TIN OVER 0.7 - 1.3p NICKEL ON TAILS ELECTRICAL: CURRENT RATING (ALL CONTACTS ARE ELECTRICALLY LOADED) = IA CONTACT RESISTANCE = 30m) MAX INSULATION RESISTANCE = 5000MQ2 MIN DIELECTRIC WITHSTANDING = 600V AC MIN MECHANICAL: PIN RETENTION = 4.4N NOMINAL SOLDERABILITY = 250C FOR 3 TO 5 SECONDS DURABILITY = 600 CYCLES ENVIRONMENTAL: TEMPERATURE RANGE = -40C TO +105C PACKING: TUBE FOR COMPLETE SPECIFICATION, SEE COMPONENT SPECIFICATION CO29XX (LATEST ISSUE) ORDER CODE: M50-360XX42P RA 7 f2i.l2.11f 11604 No. OF WAYS PER ROW NAMEFISS. DATE C/NOTE 01 TO 50 APPROVED: __R_ADDE FINISH: CHECKED: _M.G.PLESTED 42 = SELECTIVE GOLD DAN. OOKES CUSTOMER REF.: ASSEMBLY DRG: IZA RS WW/TLN www. harwin.com technical@harwin.com CONFIDENTIAL GROUP AND OR USED FOR THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE PROPERTY OF THE HARWIN DISCLOSED, LOANED, COPIED TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. AND COPYRIGHT MUST NOT BE MANUFACTURING, TOLERANCES NLESS STATED MATERIAL: TITLE:| 27mm PITCH DIL VERTICAL SEE ABOVE SMT PIN HEADER (WITH PICK & PLACE CAP) FINISH: SEE ABOVE DRAWING NUMBER: SHT S/AREA: mm2 M50-360XX42P oF,