MW LPV-1 00 series 100W Single Output Switching Power Supply MEAN WELL @ Features: * Constant voltage design * Universal AC input / Full range * Fully encapsulated with IP67 level (Note.8) Withstand 300VAC surge input for 5 seconds Protections: Short circuit / Over current / Over voltage Fully isolated plastic case Cooling by free air convection 100% full load burn-in test Low cost, high reliability Suitable for LED lighting and moving sign applications(Note 7.) * 2 years warranty ee \\ \ IP67 CE SPECIFICATION [ao] MODEL LPV-100-5 LPV-100-12 LPV-100-15 LPV-100-24 LPV-100-36 LPV-100-48 DC VOLTAGE 5V 12V 15V 24V 36V 48V RATED CURRENT 12A 8.5A 6.7A 4.2A 2.8A 2.1A CURRENT RANGE 0~12A 0~8.5A 0~6.7A 0~4.2A 0~2.8A 0~2.1A RATED POWER 60W 102W 100.5W 100.8W 100.8W 100.8W OUTPUT RIPPLE & NOISE (max.) Note.2/ 80mVp-p 120mVp-p 120mVp-p 150mVp-p 150mVp-p 150mVp-p VOLTAGE TOLERANCE Note.3 | +8.0% +5.0% LINE REGULATION +1.0% LOAD REGULATION +6.0% 42.0% SETUP, RISE TIME Note.6| 2000ms, 25ms/230VAC 2000ms, 25ms / 115VAC HOLD UP TIME (Typ.) 50ms/230VAC 14ms/115VAC at full load VOLTAGE RANGE Note.4 | 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz INPUT EFFICIENCY (Typ.) 80% 85% 87% 88% 88% 89% AC CURRENT 2.2AI115VAC 1.2A/230VAC INRUSH CURRENT(max.) COLD START 30A/115VAC 75A/230VAC LEAKAGE CURRENT 0.25mA/ 240VAC ~ 0, OVER CURRENT 110 fats rated Gui power __ PROTECTION Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.75 ~ 6.75V 13.8 ~ 16.2V | 17.25 ~ 20.25V 27.6 ~ 32.4V 41.4~48.6V 55.2 ~ 64.8V OVER VOLTAGE 7 , Protection type : Shut down o/p voltage, re-power on to recover WORKING TEMP. -25 ~ +70C (Refer to "Derating Curve") WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT | STORAGE TEMP., HUMIDITY | -40 ~ +80C, 10 ~ 95% RH TEMP. COEFFICIENT +0.03%/C (0 ~ 50C) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS IP67 approved; Design refer to TUV EN60950-1 SAFETY & WITHSTAND VOLTAGE I/P-O/P:3KVAC EMC ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25C/ 70% RH EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A(<80% load), EN61000-3-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024, light industry level, criteriaA MTBF 703Khrs min. MIL-HDBK-217F (25C) OTHERS =| DIMENSION 190*52*37mm (L*W*H) PACKING 0.63Kg;20pcs/13.6Kg/0.51 CUFT NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit. 8. Suitable for indoor use or outdoor use without direct sunlight exposure. File Name:LPV-100-SPEC 2012-03-26 MW LPV-1 00 series 100W Single Output Switching Power Supply Hi Mechanical Specification Case No. 999A Unit:mm 300420 300+20 190 UL 1015 18AWG AC/N(Blue) UL 1015 14AWG AC/L(Brown) +V(Red) -V(Black) Hi Block Diagram VP OoO- EMI FILTER & RECTIFIERS 100 80 60 40 LOAD (%) 20 O +V oO -V POWER RECTIFIERS SWITCHING 7 & FILTER PWM exe CONTROL DETECTION CIRCUIT 0.V.P. Hi Derating Curve 5V,12V Others -25 AMBIENT TEMPERATURE (C) 70 (HORIZONTAL) li Static Characteristics 100 90 80 70 60 50 LOAD (%) 40 90 100 125 135 INPUT VOLTAGE (V) 60Hz 155 165 175 180 200 230 264 File Name:LPV-100-SPEC 2012-03-26