XPC10 High temperature miniature pressure sensor
XPC10_en_RevA www.meas-spec.com 2014-01-24
1/5
• Absolute, sealed and gauge ranges
10 to 500 bar [150 to 7 500 psi]
• High temp. operation from -40 up to 220 ºC
[-40 to 428 °F]
• Stainless steel construction
• Amplified output available
• For static and dynamic applications
• Optional IP67 Ingress Protection
DESCRIPTION
The XPC10 is a miniature pressure transducer specifically designed to measure static and dynamic pressures in
temperatures from -40 to 220 °C [-40 °F to 428 °F] (unamplified models). Constructed of stainless steel, the rugged XPC10
is suitable for corrosive liquids and gases in a wide variety of harsh environments. For ease of installation and long term
performance, this miniature pressure sensor incorporates Measurement Specialties’ cutting edge SanShift
TM
technology that
eliminates zero shifts caused by installation torque. The core technology of the XPC10 consists of a foil strain gage wired in
a Wheatstone bridge circuit to provide excellent temperature stability.
An on-board amplifier is optionally available (A1) for all ranges.
A PT1000 temperature probe is optionally available for all ranges as a custom design.
FEATURES APPLICATIONS
• Low Installation Torque Sensitivity • Aerospace
• M10x1 or 3/8-24UNF thread • Test benches
• Linearity up to ±0.25% F.S. • Oven monitoring equipment
• For Static and Dynamic Applications • Cooling regulation systems
STANDARD RANGES
The psi range models are only supplied with imperial thread design.
The bar range models are only supplied with metric thread design.
*Lower pressure range 5 bar [75 psi] on request as custom design.
Full Scale (FS) Referencial pressure Linearity & Hysteresis
combined
(%FS)
bar psi Absolute Gauge Sealed
10* 150 • • •
±0.5
%
20 300 • • •
±0.3
%
35 500 • • •
±0.3
%
50 750 • • •
±0.3
%
70 1K • • •
±0.3
%
100 1.5K •
±0.25
%
200 3K •
±0.25
%
350 5K •
±0.25
%
500 7.5K •
±0.25
%
XPC10 High temperature miniature pressure sensor
XPC10_en_RevA www.meas-spec.com 2014-01-24
2/5
TEMPERATURE CHARACTERISTICS
Full Scale (FS) Operating Temperature
Range (OTR) Compensated Temperature
Range (CTR) ZeroShift
in CTR
/50°C
Sensitivity Shift
in CTR
/50°C
bar psi Celsius Fahrenheit Celsius Fahrenheit
10 150 -40 to 220°C -40 to 428°F 0 to 150°C 32 to 300°F < ±1%FS < ±1%
20 300 | | | | | |
35 500 | | | | | |
50 750 | | | | | |
70 1K | | | | | |
100 1.5K | | | | | |
200 3K | | | | | |
350 5K | | | | | |
500 7.5K | | | | | |
Temperature notes
For sensor which integrated the A1 amplifier: OTR = -40°C to 120°C [-40°F to 250°F], CTR = 0 to 80°C [32°F to 170°F]
MECHANICAL CHARACTERISTICS
Full Scale (FS) Pressure limit Tightening Torque Max. tightening Torque
bar psi
Without
damage
Witho
ut
destruction
N.m lbf.in N.m lbf.in
10 150 1.5x FS 3x FS 5 44 10 88
20 300 | | | | | |
35 500 | | | | | |
50 750 | | | | | |
70 1K | | | | | |
100 1.5K | | | | | |
200 3K | | | | | |
350 5K | | | | | |
500 7.5K | | | | | |
Notes
1. Material: Body and flush diaphragm in stainless steel; laser welded. A titanium construction is on request.
2. One Self-centred "FKM" sealing ring Ø 16x2 is supplied with the sensor. Operating temperature is -30°C to 200°C [-20°F
to 390°F] static; down to -40°C to 220°C [-40°F to 428°F] for short durations.
3. Specific threads lengths on request.
4. Protection Index: IP50
5. Electrical Termination: Shielded Ø3 mm cable with 4 wires (AWG30)
XPC10 High temperature miniature pressure sensor
XPC10_en_RevA www.meas-spec.com 2014-01-24
3/5
ELECTRICAL SPECIFICATIONS
NON-AMPLIFIED VERSION
Full Scale (FS) Frequency
resonnance
Power
supply
Full Scale
Output
(FSO) Offset Input
Impedance
Ze
Output
Impédance
Zs
bar psi
10 150 34 kHz 10 Vdc 12 mV < ±0.5mV 500 Ω 350 Ω
20 300 50 kHz | | | | |
35 500 70 kHz | | | | |
50 750 80kHz | | | | |
70 1K 95 kHz | | | | |
100 1.5K 110 kHz | | | | |
200 3K 155 kHz | | | | |
350 5K 220 kHz | | | | |
500 7.5K 250 kHz | | | | |
AMPLIFIED VERSION (A1)
Full Span (FS) Bandwidth
Power
supply
Full Scale
Output
(FSO) (2) Offset Consumption Output
Impédance
Zs (5)
b
ar
psi
10 150 600 Hz 10 to 30Vdc 4 ±0.2V 0.5 ±0.2V
<50 mA 1 000 Ω
20 300 | | | | | |
35 500 | | | | | |
50 750 | | | | | |
70 1K | | | | | |
100 1.5K | | | | | |
200 3K | | | | | |
350 5K | | | | | |
500 7.5K | | | | | |
Notes
1. All values are typical at temperature 20±1ºC.
2. Output signal : 0.5 to 4.5Vdc for A1 option.
3. Standard output signal, custom outputs available on request.
4. Insulation under 50Vdc ≥100MΩ
5. Output impedance standard 1kΩ, available <100Ω on request.
6. CE certification according to EN 61010-1, EN 50081-1, EN 50082-1.
XPC10 High temperature miniature pressure sensor
XPC10_en_RevA www.meas-spec.com 2014-01-24
4/5
Integral connector (
SC
option
)
:
Base ref. CMR-02D-04P
Supplied Accessories: mating plug CMR-02-B-04S with 2m cable ref. FMC-COM-4B-L2M
XPC10-M XPC10-X
F (thread) M10x1 3/8-24UNF
L (mm) 14.5 13.1
L (in) [0.57] [0.52]
Dimensions Metric & Imperial
XPC10
XPC10-*-SC XPC10-*-A1
XPC10-*-A1-SC
XPC10-*-A1-P7
XPC10-*-P7
DIMENSIONS & WIRING SCHEMATIC
XPC10 High temperature miniature pressure sensor
XPC10_en_RevA www.meas-spec.com 2014-01-24
5/5
OPTIONS
ZI : Zero shift in CTR <0.75% F.S. / 50 °C [/100 °F]
Z02 : CTR -40 to 60 °C [-40 to 140 ° F]
Z35 : CTR 20 to 120 °C [70 to 250 ° F]
Z38 : CTR +20°C à +200°C [70 to 390°F] (not compatible with A1 and P7 option)
SC : Connector output, mating plug supplied with 2 m cable [6.6 ft]
P7 : IP67 protection / -20°C to +150°C [0°F to 300°F ] (not compatible with gauge model)
L00M : special cable length, replace “00” with total length in meters (standard length 2,0 m [6,6 ft])
ORDERING INFORMATION
XPC10
-
M
-
A1
-
20
B
G
-
/L5M
O
ptions (L00M, SC
,
..)
Press
ure re
f
e
rence
A
: absolute
G
: gauge
S
: sealed
Unit of p
ress
ure
B
: bar
P
: psi
Range
With or without
amplification
None
: without (mV)
A1
: with amplifier (0,5 – 4,5V)
Mounting thread
M
:
M10x1
X
:
3/8-24UNF
Mode
l
NORTH AMERICA
EUROPE
ASI
A
Measurement Specialties, Inc.
Vibration Design Center
32 Journey - Suite 150
Aliso Viejo, CA 92656
United States USA
Tel: 1-949-716-0877
t&m@meas-spec.com
Measurement Specialties
(Europe), Ltd.
26 Rue des Dames
78340 Les Clayes-Sous-Bois,
France
Tel: +33 (0) 130 79 33 00
cs.lcsb@meas-spec.com
Measurement Specialties
(China), Ltd.
No. 26 Langshan Road
Shenzhen High-Tech Park (North)
Nanshan District, Shenzhen
518057
China
Tel: +86 755 3330 5088
pfg.cs.asia@meas-spec.com
The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore,
this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc.
reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee
regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use
of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can
and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. Measurement
Specialties, Inc. does not convey any license under its patent rights nor the rights of others.
