XPC10 High temperature miniature pressure sensor * Absolute, sealed and gauge ranges 10 to 500 bar [150 to 7 500 psi] High temp. operation from -40 up to 220 C [-40 to 428 F] Stainless steel construction Amplified output available For static and dynamic applications Optional IP67 Ingress Protection * * * * * DESCRIPTION The XPC10 is a miniature pressure transducer specifically designed to measure static and dynamic pressures in temperatures from -40 to 220 C [-40 F to 428 F] (unamplified models). Constructed of stainless steel, the rugged XPC10 is suitable for corrosive liquids and gases in a wide variety of harsh environments. For ease of installation and long term TM performance, this miniature pressure sensor incorporates Measurement Specialties' cutting edge SanShift technology that eliminates zero shifts caused by installation torque. The core technology of the XPC10 consists of a foil strain gage wired in a Wheatstone bridge circuit to provide excellent temperature stability. An on-board amplifier is optionally available (A1) for all ranges. A PT1000 temperature probe is optionally available for all ranges as a custom design. FEATURES * * * * APPLICATIONS * * * * Low Installation Torque Sensitivity M10x1 or 3/8-24UNF thread Linearity up to 0.25% F.S. For Static and Dynamic Applications Aerospace Test benches Oven monitoring equipment Cooling regulation systems STANDARD RANGES bar Sealed Linearity & Hysteresis combined (%FS) Referencial pressure Full Scale (FS) psi Absolute Gauge 10* 150 * * * 0.5% 20 300 * * * 0.3% 35 500 * * * 0.3% 50 750 * * * 0.3% 70 1K * * * 0.3% 100 1.5K * 0.25% 200 3K * 0.25% 350 5K * 0.25% 500 7.5K * 0.25% The psi range models are only supplied with imperial thread design. The bar range models are only supplied with metric thread design. *Lower pressure range 5 bar [75 psi] on request as custom design. XPC10_en_RevA www.meas-spec.com 1/5 2014-01-24 XPC10 High temperature miniature pressure sensor TEMPERATURE CHARACTERISTICS Full Scale (FS) Operating Temperature Range (OTR) Compensated Temperature Range (CTR) bar psi Celsius Fahrenheit Celsius Fahrenheit ZeroShift in CTR /50C Sensitivity Shift in CTR /50C 10 150 -40 to 220C -40 to 428F 0 to 150C 32 to 300F < 1%FS < 1% 20 300 | | | | | | 35 500 | | | | | | 50 750 | | | | | | 70 1K | | | | | | 100 1.5K | | | | | | 200 3K | | | | | | 350 5K | | | | | | 500 7.5K | | | | | | Temperature notes For sensor which integrated the A1 amplifier: OTR = -40C to 120C [-40F to 250F], CTR = 0 to 80C [32F to 170F] MECHANICAL CHARACTERISTICS Pressure limit Full Scale (FS) Without damage 1.5x FS Tightening Torque Without destruction 3x FS Max. tightening Torque bar psi N.m lbf.in N.m lbf.in 10 150 5 44 10 88 20 300 | | | | | | 35 500 | | | | | | 50 750 | | | | | | 70 1K | | | | | | 100 1.5K | | | | | | 200 3K | | | | | | 350 5K | | | | | | 500 7.5K | | | | | | Notes 1. Material: Body and flush diaphragm in stainless steel; laser welded. A titanium construction is on request. 2. One Self-centred "FKM" sealing ring O 16x2 is supplied with the sensor. Operating temperature is -30C to 200C [-20F to 390F] static; down to -40C to 220C [-40F to 428F] for short durations. 3. Specific threads lengths on request. 4. Protection Index: IP50 5. Electrical Termination: Shielded O3 mm cable with 4 wires (AWG30) XPC10_en_RevA www.meas-spec.com 2/5 2014-01-24 XPC10 High temperature miniature pressure sensor ELECTRICAL SPECIFICATIONS NON-AMPLIFIED VERSION Full Scale (FS) Frequency resonnance Power supply Full Scale Output (FSO) Offset Input Impedance Ze Output Impedance Zs bar psi 10 150 34 kHz 10 Vdc 12 mV < 0.5mV 500 350 20 300 50 kHz | | | | | 35 500 70 kHz | | | | | 50 750 80kHz | | | | | 70 1K 95 kHz | | | | | 100 1.5K 110 kHz | | | | | 200 3K 155 kHz | | | | | 350 5K 220 kHz | | | | | 500 7.5K 250 kHz | | | | | AMPLIFIED VERSION (A1) Full Span (FS) Bandwidth Power supply Full Scale Output (FSO) (2) Offset Consumption Output Impedance Zs (5) bar 10 psi 150 600 Hz 10 to 30Vdc 4 0.2V 0.5 0.2V <50 mA 1 000 20 300 | | | | | | 35 500 | | | | | | 50 750 | | | | | | 70 1K | | | | | | 100 1.5K | | | | | | 200 3K | | | | | | 350 5K | | | | | | | | | | | | 500 7.5K Notes 1. All values are typical at temperature 201C. 2. Output signal : 0.5 to 4.5Vdc for A1 option. 3. Standard output signal, custom outputs available on request. 4. Insulation under 50Vdc 100M 5. Output impedance standard 1k, available <100 on request. 6. CE certification according to EN 61010-1, EN 50081-1, EN 50082-1. XPC10_en_RevA www.meas-spec.com 3/5 2014-01-24 XPC10 High temperature miniature pressure sensor DIMENSIONS & WIRING SCHEMATIC XPC10-*-A1 XPC10-*-SC XPC10-*-A1-SC XPC10 XPC10-*-P7 Dimensions Metric & Imperial XPC10-M XPC10-X M10x1 3/8-24UNF L (mm) 14.5 13.1 L (in) [0.57] [0.52] F (thread) XPC10-*-A1-P7 Integral connector (SC option): Base ref. CMR-02D-04P Supplied Accessories: mating plug CMR-02-B-04S with 2m cable ref. FMC-COM-4B-L2M XPC10_en_RevA www.meas-spec.com 4/5 2014-01-24 XPC10 High temperature miniature pressure sensor OPTIONS ZI : Zero shift in CTR <0.75% F.S. / 50 C [/100 F] Z02 : CTR -40 to 60 C [-40 to 140 F] Z35 : CTR 20 to 120 C [70 to 250 F] Z38 : CTR +20C a +200C [70 to 390F] (not compatible with A1 and P7 option) SC : Connector output, mating plug supplied with 2 m cable [6.6 ft] P7 : IP67 protection / -20C to +150C [0F to 300F ] (not compatible with gauge model) L00M : special cable length, replace "00" with total length in meters (standard length 2,0 m [6,6 ft]) ORDERING INFORMATION XPC10 - M - A1 - 20 B G - /L5M Options (L00M, SC,..) Pressure reference A : absolute G : gauge S : sealed Unit of pressure B : bar P : psi Range With or without amplification None : without (mV) A1 : with amplifier (0,5 - 4,5V) Mounting thread M : M10x1 X : 3/8-24UNF Model NORTH AMERICA EUROPE Measurement Specialties, Inc. Vibration Design Center 32 Journey - Suite 150 Aliso Viejo, CA 92656 United States USA Tel: 1-949-716-0877 t&m@meas-spec.com Measurement Specialties (Europe), Ltd. 26 Rue des Dames 78340 Les Clayes-Sous-Bois, France Tel: +33 (0) 130 79 33 00 cs.lcsb@meas-spec.com ASIA Measurement Specialties (China), Ltd. No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518057 China Tel: +86 755 3330 5088 pfg.cs.asia@meas-spec.com The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer's technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. XPC10_en_RevA www.meas-spec.com 5/5 2014-01-24 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: XPC10-M-A1-20BG-/SC