REVISION D USB-A-S-X-X-VTS-X DO NOT SCALE FROM THIS PRINT C1 CONFIGURATION -S: SINGLE 14.20 .559 D C8 0.550.15 .022.006 C4 6.70 .264 C2 EI OPTION -R: ROHS COMPLIANT TYPE -A 15.40 .606 TERMINATION -VTS: VERTICAL W/ SOLDER TAILS PLATING SPECIFICATION -F: GOLD FLASH IN MATING AREA, MATTE TIN ON TAILS, OVER .000050"-.000150" NICKEL -S: SELECTIVE, .000030" GOLD IN MATING AREA, MATTE TIN ON TAILS, OVER .000050"-.000150" NICKEL COLOR -B: BLACK 7.00 .276 C3 2.00 .079 7.00 .276 14.600.5 .575.020 6.00 .236 7.70 .303 15.51 .611 18.00 .709 C5 2.50 .098 C6 7.00 .276 C7 0.30 .012 0.53 .021 1.40 .055 2.00 .079 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS. TOLERANCES ARE: DECIMALS NOTES: C REPRESENTS A CRITICAL DIMENSION. 1. 2. ALL PARTS ARE RoHS COMPLIANT WITH OR WITHOUT -R. X.X: 0.30 [.012] X.XX: 0.20 [.007] X.XXX: 0.05 [.002] MATERIAL: ANGLES 5 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 2:1 INSULATOR: PBT CONTACT: PHOS BRONZE SHIELD: COLD ROLLED STEEL, NICKEL PLATED c:\enterprisevault\DWG\MISC\MKTG\USB-A-S-X-X-VTS-X-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: VERTICAL USB W/ OUTER SHIELD AND SOLDER TAILS DWG. NO. USB-A-S-X-X-VTS-X BY: B. HARPENAU 6/22/2007 SHEET 1 OF 1