RS (ARS) 3 GHz MICROWAVE RELAYS Miniature size Lineup includes 50/75 type 3. Excellent high frequency characteristics * Impedance: 50 (Standard PC board terminal) Frequency V. S. W. R. (Max.) Insertion loss (dB, Max.) Isolation (dB, Min.) RoHS compliant to 900 MHz 1.20 to 3 GHz 1.40 0.10 0.35 60 35 * Impedance: 75 (Standard PC board terminal) FEATURES 1. Super miniature design 14 x 8.6 x 7.2 mm .551 x .339 x .283 inch (standard PC board terminal) 60% OFF in volume (Compared to RK relay) 2. Lineup includes silent type. (75 type only) Operation noise (Unit: dB) Frequency V. S. W. R. (Max.) Insertion loss (dB, Max.) Isolation (dB, Min.) to 900 MHz 1.15 to 3 GHz 1.40 0.10 0.30 60 30 * Impedance: 50 (Surface-mount terminal) Frequency V. S. W. R. (Max.) Insertion loss (dB, Max.) Isolation (dB, Min.) to 900 MHz 1.20 to 3 GHz 1.40 0.20 0.40 55 30 * Impedance: 75 (Surface-mount terminal) 30 RS (Silent type) 40 RE 50 Frequency V. S. W. R. (Max.) Insertion loss (dB, Max.) Isolation (dB, Min.) to 900 MHz 1.20 to 3 GHz 1.50 0.20 0.50 55 30 RS RELAYS (ARS) 4. Lineup includes surface-mount terminal type E and Y layouts available. 5. Lineup includes reversed contact type Great design freedom is possible using reversed contact type in which the positions of the N.O. and N.C. contacts are switched. TYPICAL APPLICATIONS 1. Broadcasting and video equipment markets * Digital broadcasting equipment * STB/tuner, etc. 2. Mobile phone base stations 3. Communications market * Antenna switching * All types of wireless devices 4. Measurement equipment market * Spectrum analyzer and oscilloscope, etc. If you wish to use in applications with low level loads or with high frequency switching, please consult us. RK ORDERING INFORMATION ARS RS relays Contact arrangement 1: Standard contact type (1 Form C) 3: Reversed contact type (1 Form C) Operating function 0: Single side stable standard type (Impedance: 75) 1: 1 coil latching type (Impedance: 75) 2: 2 coil latching type (Impedance: 75) 3: Single side stable silent type (Impedance: 75) 4: Single side stable type (Impedance: 50) 5: 1 coil latching type (Impedance: 50) 6: 2 coil latching type (Impedance: 50) Nil: Standard PC board terminal A: Surface-mount terminal, E layout Y: Surface-mount terminal, Y layout Coil voltage, DC 03: 3 V, 4H: 4.5 V, 09: 9 V, 12: 12 V, 24: 24 V (H=0.5) Packing style Nil: Carton packing (Standard PC board terminal only) Tube packing (Surface-mount terminal only) X: Tape and reel packing (picked from 2-pin side) (Surface-mount terminal only) Z: Tape and reel packing (picked from 18-pin side) (Surface-mount terminal only) ASCTB106E 201202-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ RS (ARS) TYPES 1. Standard PC board terminal and standard contact type Impedance Nominal coil voltage 50 3 V DC 4.5 V DC 9 V DC 12 V DC 24 V DC Impedance Nominal coil voltage 75 3 V DC 4.5 V DC 9 V DC 12 V DC 24 V DC Part No. 1 coil latching type ARS1503 ARS154H ARS1509 ARS1512 ARS1524 Single side stable type ARS1403 ARS144H ARS1409 ARS1412 ARS1424 2 coil latching type ARS1603 ARS164H ARS1609 ARS1612 ARS1624 Part No. Single side stable type ARS1003 ARS104H ARS1009 ARS1012 ARS1024 Standard type 1 coil latching type ARS1103 ARS114H ARS1109 ARS1112 ARS1124 2 coil latching type ARS1203 ARS124H ARS1209 ARS1212 ARS1224 Silent type Single side stable type ARS1303 ARS134H ARS1309 ARS1312 ARS1324 Standard packing: 50 pcs. in an inner package; 500 pcs. in an outer package 2. Standard PC board terminal and reversed contact type Impedance Nominal coil voltage 50 3 V DC 4.5 V DC 9 V DC 12 V DC 24 V DC Impedance Nominal coil voltage 75 3 V DC 4.5 V DC 9 V DC 12 V DC 24 V DC Part No. 1 coil latching type ARS3503 ARS354H ARS3509 ARS3512 ARS3524 Single side stable type ARS3403 ARS344H ARS3409 ARS3412 ARS3424 2 coil latching type ARS3603 ARS364H ARS3609 ARS3612 ARS3624 Part No. Single side stable type ARS3003 ARS304H ARS3009 ARS3012 ARS3024 Standard type 1 coil latching type ARS3103 ARS314H ARS3109 ARS3112 ARS3124 2 coil latching type ARS3203 ARS324H ARS3209 ARS3212 ARS3224 Silent type Single side stable type ARS3303 ARS334H ARS3309 ARS3312 ARS3324 Standard packing: 50 pcs. in an inner package; 500 pcs. in an outer package 3. Surface-mount terminal and standard contact type, E layout Impedance 50 75 Nominal coil voltage 3 V DC 4.5 V DC 9 V DC 12 V DC 24 V DC 3 V DC 4.5 V DC 9 V DC 12 V DC 24 V DC Single side stable type ARS14A03 ARS14A4H ARS14A09 ARS14A12 ARS14A24 ARS10A03 ARS10A4H ARS10A09 ARS10A12 ARS10A24 Part No. 1 coil latching type ARS15A03 ARS15A4H ARS15A09 ARS15A12 ARS15A24 ARS11A03 ARS11A4H ARS11A09 ARS11A12 ARS11A24 2 coil latching type ARS16A03 ARS16A4H ARS16A09 ARS16A12 ARS16A24 ARS12A03 ARS12A4H ARS12A09 ARS12A12 ARS12A24 Standard packing: 40 pcs. in an inner package (tube); 1,000 pcs. in an outer package Standard packing: 500 pcs. in an inner package (tape and reel); 1,000 pcs. in an outer package Note: The box at the end of a part number shows where packing type is indicated. If there is no indication, tube packing will be used. If "X" or "Z" is added, tape and reel packing will be used. Example: ARS14A03 (tube packing), ARS14A03X (tape and reel packing) 4. Surface-mount terminal and standard contact type, Y layout Impedance 50 75 Nominal coil voltage 3 V DC 4.5 V DC 9 V DC 12 V DC 24 V DC 3 V DC 4.5 V DC 9 V DC 12 V DC 24 V DC Single side stable type ARS14Y03 ARS14Y4H ARS14Y09 ARS14Y12 ARS14Y24 ARS10Y03 ARS10Y4H ARS10Y09 ARS10Y12 ARS10Y24 Part No. 1 coil latching type ARS15Y03 ARS15Y4H ARS15Y09 ARS15Y12 ARS15Y24 ARS11Y03 ARS11Y4H ARS11Y09 ARS11Y12 ARS11Y24 2 coil latching type ARS16Y03 ARS16Y4H ARS16Y09 ARS16Y12 ARS16Y24 ARS12Y03 ARS12Y4H ARS12Y09 ARS12Y12 ARS12Y24 Standard packing: 40 pcs. in an inner package (tube); 1,000 pcs. in an outer package Standard packing: 500 pcs. in an inner package (tape and reel); 1,000 pcs. in an outer package Note: The box at the end of a part number shows where packing type is indicated. If there is no indication, tube packing will be used. If "X" or "Z" is added, tape and reel packing will be used. Example: ARS14Y03 (tube packing), ARS14Y03X (tape and reel packing) Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB106E 201202-T RS (ARS) 5. Surface-mount terminal and reversed contact type, E layout Impedance Nominal coil voltage 3 V DC 4.5 V DC 9 V DC 12 V DC 24 V DC 3 V DC 4.5 V DC 9 V DC 12 V DC 24 V DC 50 75 Part No. 1 coil latching type ARS35A03 ARS35A4H ARS35A09 ARS35A12 ARS35A24 ARS31A03 ARS31A4H ARS31A09 ARS31A12 ARS31A24 Single side stable type ARS34A03 ARS34A4H ARS34A09 ARS34A12 ARS34A24 ARS30A03 ARS30A4H ARS30A09 ARS30A12 ARS30A24 2 coil latching type ARS36A03 ARS36A4H ARS36A09 ARS36A12 ARS36A24 ARS32A03 ARS32A4H ARS32A09 ARS32A12 ARS32A24 Standard packing: 40 pcs. in an inner package (tube); 1,000 pcs. in an outer package Standard packing: 500 pcs. in an inner package (tape and reel); 1,000 pcs. in an outer package Note: The box at the end of a part number shows where packing type is indicated. If there is no indication, tube packing will be used. If "X" or "Z" is added, tape and reel packing will be used. Example: ARS34A03 (tube packing), ARS34A03X (tape and reel packing) 6. Surface-mount terminal and reversed contact type, Y layout Impedance Nominal coil voltage 3 V DC 4.5 V DC 9 V DC 12 V DC 24 V DC 3 V DC 4.5 V DC 9 V DC 12 V DC 24 V DC 50 75 Part No. 1 coil latching type ARS35Y03 ARS35Y4H ARS35Y09 ARS35Y12 ARS35Y24 ARS31Y03 ARS31Y4H ARS31Y09 ARS31Y12 ARS31Y24 Single side stable type ARS34Y03 ARS34Y4H ARS34Y09 ARS34Y12 ARS34Y24 ARS30Y03 ARS30Y4H ARS30Y09 ARS30Y12 ARS30Y24 2 coil latching type ARS36Y03 ARS36Y4H ARS36Y09 ARS36Y12 ARS36Y24 ARS32Y03 ARS32Y4H ARS32Y09 ARS32Y12 ARS32Y24 Standard packing: 40 pcs. in an inner package (tube); 1,000 pcs. in an outer package Standard packing: 500 pcs. in an inner package (tape and reel); 1,000 pcs. in an outer package Note: The box at the end of a part number shows where packing type is indicated. If there is no indication, tube packing will be used. If "X" or "Z" is added, tape and reel packing will be used. Example: ARS34Y03 (tube packing), ARS34Y03X (tape and reel packing) RATING 1. Coil data 1) Single side stable type Nominal coil voltage 3 Pick-up voltage (at 20C 68F) Drop-out voltage (at 20C 68F) 75%V or less of nominal voltage (Initial) 10%V or more of nominal voltage (Initial) V DC 4.5 V DC 9 V DC 12 V DC 24 V DC Nominal operating current [10%] (at 20C 68F) Coil resistance [10%] (at 20C 68F) 66.7 mA 45 44.4 mA 22.2 mA 16.7 mA 8.3 mA 101.3 405 720 2,880 Nominal operating current [10%] (at 20C 68F) Coil resistance [10%] (at 20C 68F) Nominal operating power Max. applied voltage (at 60C 140F) 200 mW 110%V or less of nominal voltage Nominal operating power Max. applied voltage (at 60C 140F) 200 mW 110%V or less of nominal voltage Nominal operating power Max. applied voltage (at 60C 140F) 400 mW 110%V or less of nominal voltage 2) 1 coil latching type Nominal coil voltage 3 Set voltage (at 20C 68F) Reset voltage (at 20C 68F) 75%V or less of nominal voltage (Initial) 75%V or less of nominal voltage (Initial) V DC 4.5 V DC 9 V DC 12 V DC 24 V DC 66.7 mA 45 44.4 mA 22.2 mA 16.7 mA 8.3 mA 101.3 405 720 2,880 Nominal operating current [10%] (at 20C 68F) Coil resistance [10%] (at 20C 68F) 3) 2 coil latching type Nominal coil voltage 3 Set voltage (at 20C 68F) Reset voltage (at 20C 68F) 75%V or less of nominal voltage (Initial) 75%V or less of nominal voltage (Initial) V DC 4.5 V DC 9 V DC 12 V DC 24 V DC ASCTB106E 201202-T Panasonic Corporation 133.3 mA 22.5 88.9 mA 44.4 mA 33.3 mA 16.7 mA 50.6 202.5 360 1,440 Automation Controls Business Unit industrial.panasonic.com/ac/e/ RS (ARS) 2. Specifications Item Arrangement Contact material Contact resistance (Initial) Nominal switching capacity Contact carrying power Max. switching voltage Max. switching current Single side stable type Nominal operating 1 coil latching type power 2 coil latching type Contact Rating V.S.W.R. High frequency characteristics, Impedance: 50 (Initial) Insertion loss (without D.U.T. board's loss) Isolation V.S.W.R. High frequency characteristics, Impedance: 75 (Initial) Insertion loss (without D.U.T. board's loss) Isolation Insulation resistance (Initial) Breakdown Between open contacts voltage Between contact and earth terminal (Initial) Between contact and coil Electrical characteristics Temperature rise (at 20C 68F) Operate time (at 20C 68F) Release time (at 20C 68F) Set time and Reset time (at 20C 68F) Mechanical characteristics Operation noise* Shock resistance Functional Destructive Vibration resistance Functional Destructive Standard type Silent type (75, PC board terminal type only) Mechanical life Single side stable standard type Single side stable silent type Latching type Expected life 50 type Electrical life 75 type Conditions Conditions for operation, transport and storage Unit weight Specifications 1 Form C Gold plating Max. 100 m (By voltage drop 10 V AC 10mA) 1W (at 3 GHz, Impedance: 50/75, V.S.W.R.: Max. 1.4), 10 mA 24 V DC (resistive load) Max. 10W (at 3GHz, Impedance: 50/75, V.S.W.R.: Max. 1.4) 30 V DC 0.5 A DC 200mW 200mW 400mW Max. 1.20/900MHz, Max. 1.40/3GHz (Standard PC board terminal) Max. 1.20/900MHz, Max. 1.40/3GHz (Surface-mount terminal) Max. 0.10dB/900MHz, Max. 0.35dB/3GHz (Standard PC board terminal) Max. 0.20dB/900MHz, Max. 0.40dB/3GHz (Surface-mount terminal) Min. 60dB/900MHz, Min. 35dB/3GHz (Standard PC board terminal) Min. 55dB/900MHz, Min. 30dB/3GHz (Surface-mount terminal) Max. 1.15/900MHz, Max. 1.40/3GHz (Standard PC board terminal) Max. 1.20/900MHz, Max. 1.50/3GHz (Surface-mount terminal) Max. 0.10dB/900MHz, Max. 0.30dB/3GHz (Standard PC board terminal) Max. 0.20dB/900MHz, Max. 0.50dB/3GHz (Surface-mount terminal) Min. 60dB/900MHz, Min. 30dB/3GHz (Standard PC board terminal) Min. 55dB/900MHz, Min. 30dB/3GHz (Surface-mount terminal) Min. 100M (at 500V DC, Measurement at same location as "Breakdown voltage" section.) 500 Vrms for 1min. (Detection current: 10mA) 500 Vrms for 1min. (Detection current: 10mA) 1,000 Vrms for 1min. (Detection current: 10mA) Max. 60C 140F (By resistive method, nominal voltage applied to the coil, contact carrying current: 10mA) Max. 10 ms (Nominal voltage applied to the coil, excluding contact bounce time) Max. 6 ms (Nominal voltage applied to the coil, excluding contact bounce time) (without diode) Max. 10 ms (Nominal voltage applied to the coil, excluding contact bounce time) Min. 196 m/s2 (Half-wave pulse of sine wave: 11 ms, detection time: 10s) Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms) 10 to 55 Hz at double amplitude of 3 mm (Detection time: 10s) 10 to 55 Hz at double amplitude of 5 mm Approx. 40dB Approx. 30dB Min. 5x106 (at 180 cpm) Min. 106 (at 180 cpm) Min. 106 (at 180 cpm) Min. 106 (Standard PC board terminal), Min. 3x105 (Surface-mount terminal) (10V DC 10mA resistive load)/Min. 3x105 (24V DC 10mA resistive load) Min. 106 (Standard PC board terminal), Min. 3x105 (Surface-mount terminal) (1W, at 3GHz, Impedance: 50, V.S.W.R: Max. 1.4) (at 20 cpm) Min. 3x105 (10mA 24V DC resistive load) Min. 3x105 (1W, at 3GHz, Impedance: 75, V.S.W.R: Max. 1.4) (at 20 cpm) Ambient temperature: -40 to 70C -40F to 158F (Single side stable standard and Latching type) Ambient temperature: -40 to 60C -40F to 140F (Single side stable silent type) Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) Approx. 2 g .071 oz * Measured the operation noise of the relay alone (with diodes at both ends of the coil) 30cm away from top side, by the A-weighted, FAST method while applying the rated voltage. (Reference) Operation noise of RK relay (existing model): Approx. 50dB Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB106E 201202-T RS (ARS) REFERENCE DATA 1.-(1) High frequency characteristics (Impedance: 50, Standard PC board terminal) Sample: ARS144H; Measuring method: Measured with Agilent Technologies network analyzer (E8363B). *For details see No. 7 under "NOTES". * V.S.W.R. characteristics * Insertion loss characteristics (without D.U.T. board's loss) 2.0 * Isolation characteristics 0 0 Standard value 1.5 Reference value Standard value NC Isolation, dB Insertion loss, dB V.S.W.R. NO 0.5 Standard value NO 50 NC Reference value NC NO 1.0 0.3MHz Reference value 900MHz 1.0 0.3MHz 3GHz 900MHz 100 0.3MHz 3GHz 900MHz Frequency Frequency 3GHz Frequency 1.-(2) High frequency characteristics (Impedance: 75, Standard PC board terminal) Sample: ARS104H; Measuring method: Measured with Agilent Technologies network analyzer (E8363B). *For details see No. 7 under "NOTES". * V.S.W.R. characteristics * Insertion loss characteristics (without D.U.T. board's loss) 2 * Isolation characteristics 0 0 NO Standard value 1.5 Standard value Standard value NC 0.5 Isolation, dB Insertion loss, dB V.S.W.R. Reference value NC 50 NO NO Reference value NC 1 0.3MHz Reference value 900MHz 3GHz 1.0 0.3MHz 900MHz 100 0.3MHz 3GHz 900MHz Frequency Frequency 3GHz Frequency 1.-(3) High frequency characteristics (Impedance: 50, Surface-mount terminal) Sample: ARS14A4H; Measuring method: Measured with Agilent Technologies network analyzer (E8363B). *For details see No. 7 under "NOTES". * V.S.W.R. characteristics * Insertion loss characteristics (without D.U.T. board's loss) 2.0 * Isolation characteristics 0 0 Standard value 1.5 Standard value NC Isolation, dB Insertion loss, dB V.S.W.R. NO Reference value Standard value 0.5 NO 50 NC Reference value NC Reference value NO 1 0.3MHz 900MHz 1.0 0.3MHz 3GHz 900MHz 100 0.3MHz 3GHz 900MHz Frequency Frequency 3GHz Frequency 1.-(4) High frequency characteristics (Impedance: 75, Surface-mount terminal) Sample: ARS10A4H; Measuring method: Measured with Agilent Technologies network analyzer (E8363B). *For details see No. 7 under "NOTES". * V.S.W.R. characteristics * Insertion loss characteristics (without D.U.T. board's loss) 2.0 * Isolation characteristics 0 0 Standard value 1.5 NO Standard value Standard value Isolation, dB Insertion loss, dB V.S.W.R. NC Reference value NO 0.5 NC 50 NO Reference value Reference value NC 1.0 0.3MHz 900MHz 3GHz 1.0 0.3MHz Frequency ASCTB106E 201202-T Panasonic Corporation 900MHz 3GHz Frequency Automation Controls Business Unit 100 0.3MHz 900MHz 3GHz Frequency industrial.panasonic.com/ac/e/ RS (ARS) 2.-(1) Operation noise distribution When operated Sample: ARS134H (single side stable silent type), 50 pcs. Coil voltage: rated voltage applied (with diode) Equipment setting: A weighted sound pressure level, FAST. Background noise: approx. 20 dB Method of measurement: See figure below. 30 300mm 11.811inch Quantity, n Quantity, n 30 Microphone Top of relay When released 20 20 10 10 Acoustic absorption mat 0 20 Relay 30 40 0 20 50 30 Noise level, dB 40 50 Noise level, dB 2.-(2) Operation noise distribution When operated Sample: ARS104H (single side stable standard type), 50 pcs. Coil voltage: rated voltage applied (with diode) Equipment setting: A weighted sound pressure level, FAST. Background noise: approx. 20 dB Method of measurement: See figure below. 300mm 11.811inch Quantity, n Quantity, n Microphone Top of relay When released 30 30 20 20 10 10 Acoustic absorption mat 0 20 Relay 30 40 50 0 20 30 Noise level, dB 40 50 Noise level, dB 2.-(3) Operation noise distribution When set and reset Sample: ARS114H (latching type), 50 pcs. Coil voltage: rated voltage applied (with diode) Equipment setting: A weighted sound pressure level, FAST. Background noise: approx. 20 dB Method of measurement: See figure below. Quantity, n 30 Microphone Top of relay 300mm 11.811inch 20 10 Acoustic absorption mat 0 20 Relay 30 40 50 Noise level, dB The CAD data of the products with a CAD Data External dimensions CAD Data PC board pattern (Bottom view) 8.60 .339 3-2.50 +0.5 -0.1 3-.098 +.020 -.004 (Contact terminal) 14.00 .551 6.35 .250 1.40 .055 Lot No. JAPAN 7.20 .283 The part numbers depend on the type and voltage. mark can be downloaded from: http://industrial.panasonic.com/ac/e/ 8-1.00 dia. 8-.039 dia. 2.54 .100 2 coil latching only 6.35 .250 DIMENSIONS (mm inch) <Standard PC board terminal> 1. 50 type 3.50 .138 Tolerance: 0.1 .004 2.54 .100 2 coil latching only 3-0.40x0.20 3-.016x.008 Stand off 3-0.45 3-.018 (0.60) (.024) 2-0.60x0.20 2-.024x.008 Tolerance: 0.3 .012 Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB106E 201202-T RS (ARS) External dimensions CAD Data PC board pattern (Bottom view) 14.00 .551 7.20 .283 3.50 .138 2.54 .100 6.35 .250 2 coil latching only 6.35 .250 8.60 .339 JAPAN 3-2.50 +0.5 -0.1 3-.098 +.020 -.004 (Contact terminal) Lot No. The part numbers depend on the type and voltage. 2.54 .100 3-0.90 dia. 3-.035 dia. 3-0.70 dia. Min. 3-.028 dia. Min. 0.80 .031 2. 75 type 1.40 .055 R0.40 1.80 R.016 .071 Tolerance: 0.1 .004 2 coil latching only 3-0.40x0.20 3-.016x.008 Stand off 3-0.45 3-.018 2-1.40x0.20 2-.055x.008 (1.40) (.055) Tolerance: 0.3 .012 Schematic (Bottom view) 1. Standard contact type Single side stable type (Deenergized condition) -1 +5 2. Reversed contact type 1 coil latching type (Reset condition) +1 -5 2 coil latching type (Reset condition) 1 4 - 10 9 NC 8 7 COM 6 NO Direction indication 10 9 8 7 RESET COM 6 Direction indication <Surface-mount terminal> 1. Impedance: 50 type 1) E layout 5 RESET 8 7 COM 10 9 6 NO SET External dimensions 3.2 .126 0.6 .024 8-0.4 8-.016 The part numbers depend on the type and voltage. 0.5 .020 3.2 .126 8 7 COM 6 10 9 NC SET Direction indication Direction indication 10.16 .400 1 coil latching type (Reset condition) +1 -5 + + 10 9 SET Single side stable type (Deenergized condition) -1 +5 8 7 6 COM RESET 2 coil latching type (Reset condition) 1 4 - 10 9 SET 8 7 6 COM RESET Direction indication Direction indication Schematic (Top view) <Standard contact type> Single side stable type (Deenergized condition) 3.2 .126 0.6 .024 3.2 .126 0.6 .024 NC COM NO 18 17 16 15 14 13 12 11 10 Lot No. 2 - JAPAN 0.5 .020 0.5 .020 1.27 .050 4 6 7 8 + 1 coil latching type (Reset condition) 2-coil latching type (Reset condition) RESET COM SET 18 17 16 15 14 13 12 11 10 RESET COM SET 18 17 16 15 14 13 12 11 10 2 + Direction indication 4 6 7 8 - 2 - 4 6 7 8 ++ Direction indication Direction indication 1 coil latching type (Reset condition) 2-coil latching type (Reset condition) SET COM RESET 18 17 16 15 14 13 12 11 10 SET COM RESET 18 17 16 15 14 13 12 11 10 <Reversed contact type> 10.16 .400 14.0 .551 0.15 .006 8.6 .339 0.15 .006 8.0 .315 Single side stable type (Deenergized condition) NO COM NC 18 17 16 15 14 13 12 11 10 9.2 .362 11.2 .441 14.6 .575 2 - 4 6 7 8 + Direction indication 2 + 4 6 7 8 - Direction indication 2 - 4 Panasonic Corporation Automation Controls Business Unit 6 7 8 ++ Direction indication Tolerance: 0.3 .012 ASCTB106E 201202-T 5 + + industrial.panasonic.com/ac/e/ RS (ARS) 2) Y layout External dimensions 10.16 .400 3.2 .126 0.6 .024 8-0.4 8-.016 The part numbers depend on the type and voltage. 0.5 0.6 .020 .024 3.2 .126 Schematic (Top view) <Standard contact type> Single side stable type (Deenergized condition) 3.2 .126 3.2 .126 0.6 .024 NC 18 17 16 15 NO 13 12 11 10 1 coil latching type (Reset condition) RESET 18 17 16 15 SET 13 12 11 10 2-coil latching type (Reset condition) RESET 18 17 16 15 SET 13 12 11 10 Lot No. 2 - JAPAN 0.5 .020 0.5 .020 1.27 .050 10.16 .400 14.0 .551 0.15 .006 Direction indication 8.6 .339 2 + 4 5 6 7 8 COM 2 - 4 5 6 7 8 COM + + Direction indication Direction indication 1 coil latching type (Reset condition) 2-coil latching type (Reset condition) <Reversed contact type> 0.15 .006 Single side stable type (Deenergized condition) 8.0 .315 NO 18 17 16 15 9.2 .362 11.2 .441 14.6 .575 4 56 7 8 + COM 2 - NC 13 12 11 10 4 5 6 7 8 + COM Direction indication SET 18 17 16 15 2 + RESET 13 12 11 10 4 5 6 7 8 COM SET 18 17 16 15 2 - RESET 13 12 11 10 4 5 6 7 8 COM + + Direction indication Direction indication 1 coil latching type (Reset condition) 2-coil latching type (Reset condition) RESET COM SET 18 17 16 15 14 13 12 11 10 RESET COM SET 18 17 16 15 14 13 12 11 10 Tolerance: 0.3 .012 2. Impedance: 75 type 1) E layout External dimensions 10.16 .400 3.2 .126 0.6 .024 8-0.4 8-.016 The part numbers depend on the type and voltage. 0.5 .020 3.2 .126 Schematic (Top view) <Standard contact type> 3.2 .126 0.6 .024 3.2 .126 0.6 .024 Single side stable type (Deenergized condition) NC COM NO 18 17 16 15 14 13 12 11 10 Lot No. 2 - JAPAN 0.5 .020 0.5 .020 1.27 .050 10.16 .400 14.0 .551 0.15 .006 6 7 8 + Direction indication 8.6 .339 2 + 4 6 7 8 - 2 - 4 6 7 8 ++ Direction indication Direction indication 1 coil latching type (Reset condition) 2-coil latching type (Reset condition) SET COM RESET 18 17 16 15 14 13 12 11 10 SET COM RESET 18 17 16 15 14 13 12 11 10 <Reversed contact type> 0.15 .006 Single side stable type (Deenergized condition) 8.0 .315 NO COM NC 18 17 16 15 14 13 12 11 10 9.2 .362 11.2 .441 14.6 .575 4 2 - 4 6 7 8 + Direction indication 2 + 4 6 7 8 - 2 - 4 6 7 8 ++ Direction indication Direction indication 1 coil latching type (Reset condition) 2-coil latching type (Reset condition) Tolerance: 0.3 .012 2) Y layout External dimensions 10.16 .400 3.2 .126 0.6 .024 8-0.4 8-.016 The part numbers depend on the type and voltage. 0.5 0.6 .020 .024 3.2 .126 Schematic (Top view) <Standard contact type> Single side stable type (Deenergized condition) 3.2 .126 3.2 .126 0.6 .024 NC 18 17 16 15 NO 13 12 11 10 RESET 18 17 16 15 SET 13 12 11 10 RESET 18 17 16 15 SET 13 12 11 10 Lot No. 2 - JAPAN 0.5 .020 0.5 .020 1.27 .050 10.16 .400 14.0 .551 0.15 .006 Direction indication 8.6 .339 2 + 4 5 6 7 8 COM 2 - 4 5 6 7 8 COM + + Direction indication Direction indication 1 coil latching type (Reset condition) 2-coil latching type (Reset condition) <Reversed contact type> 0.15 .006 8.0 .315 14.6 .575 4 56 7 8 + COM 9.2 .362 11.2 .441 Single side stable type (Deenergized condition) NO 18 17 16 15 2 - NC 13 12 11 10 4 5 6 7 8 + COM Direction indication SET 18 17 16 15 2 + RESET 13 12 11 10 4 5 6 7 8 COM Direction indication SET 18 17 16 15 2 - RESET 13 12 11 10 4 5 6 7 8 COM + + Direction indication Tolerance: 0.3 .012 Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB106E 201202-T RS (ARS) NOTES 1. Coil operating power Pure DC current should be applied to the coil. The wave form should be rectangular. If it includes ripple, the ripple factor should be less than 5%. However, check it with the actual circuit since the characteristics may be slightly different. The nominal operating voltage should be applied to the coil for more than 30 ms to set/reset the latching type relay. 2. Coil connection When connecting coils, refer to the wiring diagram to prevent mis-operation or malfunction. 3. External magnetic field Since RS relays are highly sensitive polarized relays, their characteristics will be affected by a strong external magnetic field. Avoid using the relay under that condition. 4. Cleaning For automatic cleaning, the boiling method is recommended. Avoid ultrasonic cleaning which subjects the relays to high frequency vibrations, which may cause the contacts to stick. It is recommended that alcoholic solvents be used. 5. Conditions for operation, transport and storage conditions 1) Temperature * Single side stable standard and latching type: -40 to 70C -40 to 158F * Single side stable silent type: -40 to 60C -40 to 140F 2) Humidity: 5 to 85% RH (Avoid freezing and condensation.) The humidity range varies with the temperature. Use within the range indicated in the graph below. 3) Atmospheric pressure: 86 to 106 kPa Temperature and humidity range for usage, transport, and storage: Single side stable standard and latching type Humidity, %R.H. 85 Tolerance range (Avoid freezing when used at temperatures lower than 0C 32F) 5 -40 -40 (Avoid condensation when used at temperatures higher than 0C 32F) 0 70 32 158 Temperature, C F ASCTB106E 201202-T Single side stable silent type Humidity, %R.H. 85 Tolerance range (Avoid freezing when used at temperatures lower than 0C 32F) 5 -40 -40 (Avoid condensation when used at temperatures higher than 0C 32F) A 0 60 32 140 Temperature, C F 4) Condensation Condensation forms when there is a sudden change in temperature under high temperature and high humidity conditions. Condensation will cause deterioration of the relay insulation. 5) Freezing Condensation or other moisture may freeze on the relay when the temperature is lower than 0C 32F. This causes problems such as sticking of movable parts or operational time lags. 6) Low temperature, low humidity environments The plastic becomes brittle if the relay is exposed to a low temperature, low humidity environment for long periods of time. 7) Storage requirements Since the relay is sensitive to humidity, the surface-mount type is packaged with tightly sealed anti-humidity packaging. However, when storing, please be careful of the following. (1) Please use promptly once the antihumidity pack is opened. If relays are left as is after unpacking, they will absorb moisture which will result in loss of air tightness as a result of case expansion due to thermal stress when reflow soldering during the mounting process. (within one day, 30C and 60%R.H or less) (2) When storing for a log period after opening the anti-humidity pack, storage in anti-humidity packaging with an antihumidity bag to which silica gel has been added, is recommended. *Furthermore, if the relay is solder mounted when it has been subjected to excessive humidity, cracks and leaks can occur. Be sure to mount the relay under the required mounting conditions. 6. Soldering 1) Please meet the following conditions if this relay is to be automatically soldered. (1) Preheating: Max. 120C 248F (terminal solder surface) for max. 120 seconds (2) Soldering: Max. 2605C 5009F for max. 6 seconds Panasonic Corporation *Relays are influenced by the type of PC board used. Please confirm with the actual PC board you plan to use. *Please avoid reflow soldering. 2) Surface-mount terminal In case of automatic soldering, the following conditions should be observed (1) Position of measuring temperature Automation Controls Business Unit A: Surface of PC board where relay is mounted. (2) IR (infrared reflow) soldering method T3 T1=150 to 180C T2 T2=230C and higher T1 T3=250C max. t1=60s to 120s t2=within 30s t1 t2 * Mounting cautions Rise in relay temperature depends greatly on the component mix on a given PC board and the heating method of the reflow equipment. Therefore, please test beforehand using actual equipment to ensure that the temperature where the relay terminals are soldered and the temperature at the top of the relay case are within the conditions given above. 3) Please meet the following conditions if this relay is to be soldered by hand. (1) 260C 500F for max. 10 seconds (2) 350C 662F for max. 3 seconds The effect on the relay depends on the actual substrate used. Please verify the substrate to be used. (3) Avoid ultrasonic cleaning. Doing so will adversely affect relay characteristics. Please use alcohol-based cleaning solvents when cleaning relays. 7. Tape and reel packing 1) Tape dimensions X type 1.5 +0.1 0 dia. 2.0 1.75 8.3 .059 +.004 dia. 0 16.0 .079 .069 .327 12.0 .630 4.0 RS relay 0.4 .472 .157 .016 11.5 .453 8.6 .339 15.00 .591 24.00.3 .945.012 Tape coming out direction Relay polarity bar Z type (General tolerance: 0.1 .004) 2) Dimensions of plastic reel 21 0.8 dia. .827 .031dia. 380 2 dia. 14.961 .079 dia. 80 1 dia. 3.150 .039 dia. 2.0 0.5 .079.020 13 0.2 dia. .512 .008dia. 24.4+2.0 0 .961+.079 0 2.0 0.2 .079 .008 industrial.panasonic.com/ac/e/ RS (ARS) 1 Network analyzer 2 PORT2 Agilent 1 2.50 .098 1.80 .071 2 Te c h n o l o g i e s PORT1 6.05 .238 No. Product name Contents 1 Agilent 85130-60011 Adapter 2.4mm-3.5mm female .095inch-.138inch female 2 SUHNER SUCOFLEX104 Cable 3.5mm-3.5mm male .138inch-.138inch male After calibration, connect the D.U.T. board and measure. However, connectors other than those for measurement should be connected with a 50 termination resistor. <Standard PC board terminal> PC board Dimensions (mm inch) 3-R 0.90 3-R .35 1.80 .071 13.00 .512 2.80 .110 6.35 .250 4.20 .165 3-R 1.40 3-R .055 5.08 .200 8-1.00 dia. 8-.039 dia. (Through hole) 5-2.00 dia. 5-.079 dia. 3-1.00 dia. 3-.039 dia. 15.15 22.00 .596 .866 15.95 .628 1.80 .071 1.80 2.50 .071 .098 2.80 .110 1.27 .050 3-0.70 dia. 3-.028 dia. (Through hole) 2.54 .100 20.00 .787 10.16 .400 0.90 .035 13.00 .512 3-0.55 dia. 3-.022 dia. 6.35 .250 4.90 .193 4.20 .165 3-1.50 dia. 3-.059 dia. PC board for correction Dimensions (mm inch) <Surface-mount terminal and E layout> PC board Dimensions (mm inch) 2.80 1.80 .110 .071 9.12 .359 Material: Glass PTFE double-sided through hole PC board R-4737 (Panasonic Corporation) Board thickness: t = 0.8 mm .031 inch Copper plating: 18 m Connector (SMA type receptacle) Product name: 01K1808-00 (Waka Manufacturing Co., Ltd.) Insertion loss compensation The insertion loss of relay itself is given by subtracting the insertion loss of shortcircuit the Com and the NC (or NO). (signal path and two connectors) 2) 75 type 1 5-1.40 dia. 5-.055 dia. 5.08 .200 0.80 .031 3-3.00 dia. 3-.118 dia. 2.50 3.70 .098 .146 2.80 .110 Connect connectors 1 and 2 respectively to PORT 1 and PORT 2. Perform calibration using the 3.5 mm calibration kit (HP85052B). 1.78 .070 R0.40 R.016 20.00 .787 10.16 .400 E8363B 20.00 .787 10.16 .400 <Standard PC board terminal> PC board Dimensions (mm inch) <Surface-mount terminal and Y layout> PC board Dimensions (mm inch) 8. Measuring method 1) 50 type 2.50 .098 0.80 .031 20.00 .787 10.16 .400 2.80 .110 2.50 0.80 .098 .031 4.70 .185 7.75 .305 24.00 .945 16.15 .636 2.80 .110 0.80 .031 1.27 .050 <Surface-mount terminal and Y layout> PC board Dimensions (mm inch) 2.50 .098 0.80 .031 2 20.00 .787 10.16 .400 2.50 4.70 .098 .185 PORT2 2.54 .100 2.50 .098 1.80 .071 2.80 .110 20.00 .787 10.16 .400 1 2 Technologies E8363B No. 1 15.15 .596 22.00 .866 1.27 .050 PORT1 Connect connectors 1 and 2 respectively to PORT 1 and PORT 2. Perform calibration using the 3.5 mm calibration kit (HP85039B). 2.80 .110 2.50 1.80 .098 .071 3.70 .146 6.05 .238 1.80 .071 0.80 .031 Agilent <Surface-mount terminal and E layout> PC board Dimensions (mm inch) 7.75 .305 16.25 .640 16.15 24.00 .636 .945 2.80 .110 Network analyzer Product name 85134-60003 2 11852B 2 85039-60011 Contents Test port cable Conversion adapter; 50 N type (female) to 75 N type (male) Conversion adapter; 75 N type (female) to 75 F type (male) After calibration, connect the D.U.T. board and measure. However, connectors other than those for measurement should be connected with a 75 termination resistor. Panasonic Corporation Automation Controls Business Unit 0.80 2.50 .031 .098 2.80 .110 1.27 .050 PC board for correction Dimensions (mm inch) 4.90 .193 0.90 .035 9.12 .359 Material: Glass PTFE double-sided through hole PC board R-4737 (Panasonic Corporation) Board thickness: t = 0.8 mm .031 inch Copper plating: 18m Connector (F type receptacle) Product name: C05-0236 (Komine Musen Electric Corporation) industrial.panasonic.com/ac/e/ ASCTB106E 201202-T RS (ARS) Insertion loss compensation The insertion loss of relay itself is given by subtracting the insertion loss of shortcircuit the COM and the NC (or NO). (signal path and two connectors) 9. Others 1) The switching lifetime is defined under the standard test condition specified in the JIS* C 5442 standard (temperature 15 to 35C 59 to 95F, humidity 25 to 75%). Check this with the real device as it is affected by coil driving circuit, load type, activation frequency, activation phase, ambient conditions and other factors. Also, be especially careful of loads such as those listed below. * When used for AC load-operating and the operating phase is synchronous, rocking and fusing can easily occur due to contact shifting. * When high-frequency opening and closing of the relay is performed with a load that causes arcs at the contacts, nitrogen and oxygen in the air is fused by the arc energy and HNO3 is formed. This can corrode metal materials. ASCTB106E 201202-T Three countermeasures for these are listed here. (1) Incorporate an arc-extinguishing circuit. (2) Lower the operating frequency (3) Lower the ambient humidity 2) Use the relay within specifications such as coil rating, contact rating and on/ off service life. If used beyond limits, the relay may overheat, generate smoke or catch fire. 3) Be careful not to drop the relay. If accidentally dropped, carefully check its appearance and characteristics before use. 4) Be careful to wire the relay correctly. Otherwise, malfunction, overheat, fire or other trouble may occur. 5) If a relay stays on in a circuit for many months or years at a time without being activated, circuit design should be reviewed so that the relay can remain non-excited. A coil that receives current all the time heats, which degrades insulation earlier than expected. A latching type relay is recommended for such circuits. Panasonic Corporation Automation Controls Business Unit 6) To ensure accurate operation of the latching type amidst surrounding temperature changes and other factors that might affect the set and reset pulse times, we recommend a coil impress set and reset pulse width of at least 30 ms at the rated operation voltage. 7) The latching type relay is shipped in the reset position. But jolts during transport or impacts during installation can change the reset position. It is, therefore, advisable to build a circuit in which the relay can be initialized (set and reset) just after turning on the power. 8) If silicone materials (e.g., silicone rubbers, silicone oils, silicone coating agents, silicone sealers) are used in the vicinity of the relay, the gas emitted from the silicone may adhere to the contacts of the relay during opening and closing and lead to improper contact. If this is the case, use a material other than silicone. For general cautions for use, please refer to the "General Application Guidelines". industrial.panasonic.com/ac/e/