Infrared light emitting diode, top view type SIR-341ST3F The SIR-341ST3F is a GaAs infrared light emitting diode housed in clear plastic. This device has a high luminous efficiency and a 940nm peak wavelength suitable for silicon detectors. It is small and at the same time has a wide radiation angle, marking it ideal for compact optical control equipment. Dimensions (Unit : mm) Applications Optical control equipment Light source for remote control devices 3.80.3 3.5 1.1 0.5 2.51 2- Max.1 4-0.6 Notes: 1. Unspecified tolerance shall be 0.2. 2. Dimension in parenthesis are show for reference. Min.24 Features 1) Compact (3.1mm). 2) High efficiency, high output PO8.4mW (IF50mA). 3) Wide radiation angle 1/216deg. 4) Peak wavelength well suited to silicon detectors (P940nm). 5) Good current-optical output linearity. 6) Long life, high reliability. 5.20.3 3.10.2 2 1 (2.5) 1 Anode 2 Cathode Absolute maximum ratings (Ta = 25C) Parameter Symbol Limits Unit IF 75 mA Forward current Reverse voltage VR 5 V Power dissipation PD 100 mW Pulse forward current IFP 500 mA Operating temperature Topr -25 to +85 C Storage temperature Tstg -40 to +85 C Pulse width=0.1msec, duty ratio 1% Electrical and optical characteristics (Ta = 25C) Parameter Symbol Min. Typ. Max. Unit Conditions Optical output PO - 8.4 - mW IF=50mA Emitting strength IE 5.6 18.1 - mW/sr IF=50mA Forward voltage VF - 1.3 1.5 V IF=50mA Reverse current IR - - 10 A VR=3V Peak light emitting wavelength P - 940 - nm IF=50mA Spectral line half width - 40 - nm IF=50mA Half-viewing angle 1 / 2 - 16 - deg IF=50mA Response time tr*tf - 1.0 - s IF=50mA fC - 1.0 - MHz IF=50mA Cut-off frequency www.rohm.com c 2012 ROHM Co., Ltd. All rights reserved. 1/2 2012.06 - Rev.C SIR-341ST3F Data Sheet Electrical and optical characteristic curves 100 FORWARD CURRENT : IF (mA) 60 40 20 0 0 20 40 60 80 -25C 0C 25C 50C 75C 40 30 20 10 0 0 100 1 AMBIENT TEMPERATURE : Ta (C) FORWARD VOLTAGE : VF (V) Fig.1 Forward current falloff RELATIVE EMITTING STRENGTH : IE (%) EMITTING STRENGTH : IE (mW/sr) 40 30 20 10 20 40 60 80 100 10 -20 0 20 40 60 80 50 60 60 40 70 20 80 60 40 20 940 960 980 Fig.3 Wavelength 100 40 80 920 80 Fig.5 Relative emitting strength vs.ambient temperature RELATIVE EMITTING STRENGTH (%) 900 20 30 90 100 0 50 Fig.4 Emitting strength vs. forward current 0 20 100 AMBIENT TEMPERATURE : Ta (C) 10 40 200 FORWARD CURRENT : IF (mA) 20 60 OPTICAL WAVELENGTH : (nm) Fig.2 Forward current vs. forward voltage 50 0 0 2 80 RELATIVE EMITTING STRENGTH (%) FORWARD CURRENT : IF (mA) 80 RELATIVE OPTICAL OUTPUT : PO (%) 100 50 0 10 20 30 40 50 60 70 80 90 ANGULAR DISPLACEMENT : (deg) Fig.6 Directional pattern www.rohm.com c 2012 ROHM Co., Ltd. All rights reserved. 2/2 2012.06 - Rev.C Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2012 ROHM Co., Ltd. All rights reserved. R1120A