BXA40-48T05-12-M - Emerson - Product.Network

DC/DC CONVERTERS 40W Wide Input DC/DC Converters 1

2 YEAR WARRANTY

BXA40 Series

Triple output

•Meets telecom power supply interface standard

ETS300-132-2

•EN60950, CSA950 and UL1950 safety approvals

•EN61000-4-2, -3, -4, -5, -6 immunity compliant

•Fixed frequency operation at 400kHz

•MTBF in excess of 500,000 hours

•Basic insulation system with 1500V isolation

•Pin-compatible with NFC40 Series

The BXA40-48T05-12-M provides 40 Watts of output power, has been conceived as an

applications-specific range of DC/DC converters, specifically addressing

telecommunications, industrial electronics, test equipment, mobile telecommunications

and distributed power applications. The series offers a wide input voltage range, of 36-

75VDC, and is available with a 5/±12V triple output. The BXA40 series is designed to

meet ETSI telecoms interface standard ETS300-132-2. With safety approval to IEC950

and basic insulation, the 48VDC model is ideal for telecommunications applications.

Other features include low output ripple, overvoltage protection, short circuit protection

and remote enable.

All specifications are typical at nominal input, full load at 25°C unless otherwise stated

EMC CHARACTERISTICS

Conducted emissions EN55022, FCC part 15, Level B

(See Notes 6, 9)

Radiated emissions EN55022, FCC part 15 Level A

ESD air EN61000-4-2, level 3 Perf. criteria 1

ESD contact EN61000-4-2, level 4 Perf. criteria 1

Surge EN61000-4-5, level 3 Perf. criteria 1

Fast transients EN61000-4-4, level 3 Perf. criteria 1

Radiated immunity EN61000-4-3, level 3 Perf. criteria 1

Conducted immunity EN61000-4-6, level 3 Perf. criteria 1

GENERAL SPECIFICATIONS

Efficiency 83%

Isolation voltage Input/output 1500VDC

Basic insulation, input/case 1500VDC

Switching frequency Fixed 400kHz (typical)

Approvals and EN60950, UL1950

standards (pending) CSA C22.2 No. 950

Case material Aluminum substrate

with plastic case

Material flammability UL94V-0

Weight 85g typ. (3.0oz)

MTBF MIL-HDBK-217F 500,000 hours

Size 2.2 x 2.2 x 0.5 inches

55.9 x 55.9 x 12.7 mm

ENVIRONMENTAL SPECIFICATIONS

Thermal performance Baseplate operating -40°C to +105°C

temperature

Non-operating -55°C to +105°C

Thermal impedance No air flow, no heatsink 8.5°C/W

(See Note 8) No air flow, with heatsink 7.2°C/W

SPECIFICATIONS

File Name: BXA40T.PDF Rev: 02 Oct 2002

OUTPUT SPECIFICATIONS

Line regulation Main output ±0.5%

(See Note 2) Auxiliary output ±2.0%

Load regulation Main output ±1.0%

(See Note 3) Auxiliary output ±3.0% typ.,

±5.0% max.

Load cross regulation Main output ±1.0%

(See Note 4) Aux. output ±3.0% typ., ±5.0% max.

Ripple and noise Main output 50mV pk-pk,

(20MHz bandwidth) 20mV rms

Auxiliary output 100mV pk-pk,

20mV rms

Temperature coefficient ±0.02%/°C

Overvoltage protection Main output 6.8V (nom.)

transorbs fitted Auxiliary outputs 16/20V (nom.)

Short circuit protection Main output 11A

(See Note 5) Auxiliary output 5A

Transient response 25% to 100% load 4.0%

Voltage accuracy Main output ±1.0%

Auxiliary output ±3.0%

Minimum Load Main output 0.6A

Auxiliary outputs 0.03A/0.04A

INPUT SPECIFICATIONS

Input voltage range 48Vin nominal 36 to 75VDC

Reverse voltage External fuse (See Note 7)

protection

Max. input rise and 5V/ms

fall time ETS300-132

Start-up time 30ms typ.

Remote ON/OFF

Logic compatibility CMOS/TTL

ON Open-circuit

OFF <1VDC

Data Sheet © Artesyn Technologies

2002

The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Art esyn Technologies accepts no responsibility for consequences arising

from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.

For the most current data and application support visit www.artesyn.com/powergroup/products.htm

Notes

1Nominal line, at no load.

2Nominal line to high line, nominal line to low line.

3Load regulation:

Main output (V1): 25 to 100% with 25% to 100% balanced on auxiliaries.

Auxiliary outputs (V2 and V3): 25% to 100% balanced on all outputs.

4Cross regulation:

Main output 100% load, auxiliary 100%, other auxiliary 25% to 100%.

Auxiliary outputs (V2 and V3): main output 100% load, auxiliary 100%,

other auxiliary 25% to 100% or main output 25%, auxiliary 25%, other

auxiliary 25% to 100%.

5Short circuit protection, ≤1 minute on auxiliary outputs.

6For EMI compliance to EN55022 level B please consult factory for details.

For EMI compliance to EN55022 level A, refer to BXA40 Design Note 101.

7Reverse voltage protection, refer to BXA40 Design Note 101.

8The maximum operating ambient temperature, without derating depends

on internal power dissipation and module efficiency and cooling method.

Download BXA40 Design Note 101 which provides detailed thermal

calculations and design-in hints from the Artesyn website.

9It is suggested that an external filter capacitor be used. A 4µF (or greater)

film capacitor such as: ITW Paktron Capstick series, part number

405K100CS4 4µF/100V is recommended, if filtering is not used. See BXA40

Design Note 101.

10 The unit with the suffix ‘-M’ at the end of the model number is offered as

standard with metric threaded inserts (M3). To order a unit with imperial

threaded inserts (4-40 UNC) please remove the suffix ‘-M’ from the model

number. These inserts are used for bolting the unit to a

PCB and/or fixing heatsinks.

11 A top mounted heatsink kit is available for the BXA40.

The heatsink may be oriented parallel to or

perpendicular to the direction of the pins, thus providing

optimum flexibility for cooling requirements. The order

number for the top mounted heatsink kit with metric

screws is ‘NFC40-HTSK-T’. The order number for the

top mounted heatsink kit with imperial screws is

‘NFC40-HTSK-T-I’.

BXA40 Series

Triple output

DC/DC CONVERTERS 40W Wide Input DC/DC Converters 2

Please consult our website for the following items: ✔ Design Note www.artesyn.com

File Name: BXA40T.PDF Rev: 02 Oct 2002

INPUT OUTPUT OUTPUT INPUT TYPICAL MODEL NUMBER (10)

VOLTAGE VOLTAGE CURRENT (MAX.) CURRENT (1) EFFICIENCY

36-75VDC 5V/±12V 6A/±0.4A 30mA 83% BXA40-48T05-12-M

PIN CONNECTIONS

PIN NUMBER TRIPLE OUTPUT

1 + Input

2 – Input

3 Control

4 + Output (V2)

5 Common

6 - Output (V3)

7 + Output (V1)

8 - Output (V1)

9 No Connection

BOTTOM VIEW

ALL DIMENSIONS IN INCHES (mm)

0.3

(7.62)

0.019

(0.50)

0.50

(12.70) 0.15

(3.90)

321

98 76 5 4

2.20 ±0.02

(

0 ±0.50

)

1.90

(

)

1.80

(

)

0.15

(

)

0.05

(

)

0.2

(5.08)

0.1

(2.54)

0.6

(15.24)

0.8

(20.32) 0.5

(12.70)

0.2

(5.08)

0.60

(15.24)

1.25

(31.76)

1.90

(48.26)

0.15

(3.82)

0.256 (6.50) Diameter

Stand-off (4 Places)

Metric (Suffix '-M'):

M3 Tap Thru. 4 places or

Imperial (No '-M' suffix) 4-

40 UNC (Optional)

0.043 ±0.003(1.02 ±0.05)

Diameter Typ.

TOLERANCE : ± 0.004 (0.1)

(Unless otherwise specified)

2.20 ±0.02

(

0 ±0.50

)

International Safety Standard Approvals

VDE0805/EN60950/IEC950 File No. 14501-3336-7009

Licence No. 6296

UL1950 File No. E174104

CSA C22.2 No. 950 File No. LR41062C