SUNON
MODEL NO ：SA000-12004
DESCRIPTION ：Thermal Module
DIMENSIONS ：∮85X75 mm
SUNON SPEC. NO. ：C01000730F-01
CUSTOMER
APPROVAL NO. ：
APPROVED BY
CUSTOMER
(AUTHORIZED)
：
DRAWN CHECKED APPROVED SPEC. NO C01000730F-01
ISSUED DATE 02. 18. 2012
EDITION 0
Qian
2/18
Amy
Eric
REVISION DATE
建準電機工業股份有限公司
SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD.
NO. 30, LN. 296, XINYA RD., QIANZHEN DIST., TEL:886-7-8135888
KAOHSIUNG CITY 80673, TAIWAN (R.O.C) FAX:886-7-8230505/8230606/8231010
URL:http://www.sunon.com E-mail: sunon@email.sunon.com.tw
SPECIFICATION FOR APPROVAL
SUNON
1. SPECIFICATIONS ------------------------------------- Page 2
2. DIMENSION --------------------------------------------- Page 3
3. CPK TEST ------------------------------------------------ Page 4~5
4. NOTES ------------------------------------------------------- Page 6
5. Declaration of RoHS ---------------------------------------Page 7
PAGE 1 OF 7
SPEC. NO. C01000730F-01
ISSUED DATE 02. 18. 2012
EDITION 0
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD.
建準電機工業股份有限公司
REVISION DATE
CHECK LIST
SPECIFICATION FOR APPROVAL
2012.02.20
SUNON
MODEL : SA000-12004
1. Application Cpu Chipeset 10W
2. Heat Sink Dimension ∮85X75 HF
3. Heat Sink Material AL6063(陽極黑色)
4. Cooling Method N/A
5. Thermal Grease / PAD N/A
6. Fan Dimension N/A
7. Fan Speed (with Heat Sink) N/A
8. Fan Airflow ( with Heat Sink ) N/A
9. Fan Rating Voltage N/A
10. Fan Rating Current ( with Heat Sink ) N/A
11. Fan Power Consumption
( with Heat Sink ) N/A
12. Fan Bearing Type N/A
13. Fan Connector N/A
14. Cooling Module Noise N/A
15. Fan Operating Voltage Range N/A
16. Operating Temperature -10 to + 70 deg. C
17. Storage Temperature -40 to + 70 deg. C
18. Weight 342 g
19. Life Expectance N/A
PAGE 2 OF 7
SPEC. NO. C01000730F-01
ISSUED DATE 02. 18. 2012
EDITION 0
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD.
建準電機工業股份有限公司
REVISION DATE
1.SPECIFICATIONS
2012.02.20
SUNON
PAGE 3 OF 7
SPEC. NO. C01000730F-01
ISSUED DATE 02. 18. 2012
EDITION 0
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD.
建準電機工業股份有限公司
REVISION DATE
2.DIMENSION
2012.02.20
SUNON
1. CPK TEST
PAGE 4 OF 7
SPEC. NO. C01000730F-01
ISSUED DATE 02. 18. 2012
EDITION 0
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD.
建準電機工業股份有限公司
REVISION DATE
3. CPK TEST
2012.02.20
SUNON
PAGE 5 OF 7
SPEC. NO. C01000730F-01
ISSUED DATE 02. 18. 2012
EDITION 0
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD.
建準電機工業股份有限公司
REVISION DATE
3. CPK TEST
2012.02.20
SUNON
Notes
I. SPECIFICATION MODIFICATION
1. SUNON offers engineering assistance on module installation and cooling
system design.
2. All changes, modifications and/or revisions to the specifications, if any, are
incorporated in the attached specifications.
3. No changes, modifications and/or revisions to these specifications are effective
absent agreement, by both Sunon and the customer, in writing.
4. This module will be shipped in accordance with the attached specification
unless SUNON and the customer have agreed otherwise, in writing, as
specificied in Paragraph 3, above.
II. OTHER
1. DO NOT operate this module in proximity to hazardous materials such as
organic silicon, cyanogens, formalin, phenol, or corrosive gas environments
including, but not limited to, H2S, SO2, NO2, or Cl2.
2. Unless otherwise noted, all testing of this module is conducted at 25°C ambient
temperature and sixty-five percent (65%) relative humidity.
3. DO NOT store this module in an environment with high humidity. This
module must be stored in accordance with the attached specifications
regarding storage temperature. If this module is stored for more than 6
months, SUNON recommends functional testing before using.
4. SUNON reserves the right to use components from multiple sources at its
discretion. The use of components from other sources will not affect the
specifications as described herein.
III. WARRANTY
This module is warranted against all defects which are proved to be fault in
our workmanship and material for one year from the date of our delivery.
The sole responsibility under the warranty shall be limited to the repair of
the module or the replacement thereof, at SUNON’s sole discretion. SUNON
will not be responsible for the failures of its module due to improper
handing, misuse or the failure to follow specifications or instructions for use.
In the event of warranty claim, the customer shall immediately notify
SUNON for verification. SUNON will not be responsible for any
consequential damage to the customer’s equipment as a result of any module
proven to be defective.
PAGE 6 OF 7
SPEC. NO. C01000730F-01
ISSUED DATE 02. 18. 2012
EDITION 0
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD.
建準電機工業股份有限公司
REVISION DATE
2012.02.20
SUNON
Control declaration of environment- related substances/ materials
1. In accordance with the Restriction of Hazardous Substances (RoHS) Directive and
specific market requirements, Sunon Halogen-Free Product have complied with law
and discipline not to employ the forbidden substances, and restrict the allowable
concentration of some lim ited substances deliberately in our components.
No Substance Criteria
1 CFCs & HCFCs (ozone depleting substances) Forbidden
2 Chlorinated Organic Solvent Forbidden
Plastic (Frame, Impeller, wire harness, etc.) <100ppm
Solder <1000ppm
Steel alloy <3500ppm
Aluminium alloy <4000ppm
3 Lead and its compounds
Copper alloy <4wt%
Solder <20ppm
Parts composed of metals containing zinc
(e.g. brass, zinc for die casting) <100ppm
4 Cadmium and its compounds
Plastic <5ppm
5 PBBs and PBDEs Forbidden
6 PCB and PCT Forbidden
7 CP, Short-chain Chlorinated paraffins C10-13, Cl ≥48 wt% Forbidden
8 Mirex Forbidden
9 PCN Forbidden
10 Hexavalent Chromium compounds <100ppm
11 Mercury and its compounds Forbidden
12 Asbestos Forbidden
13 Organic Tin compounds Forbidden
14 Azo compounds Forbidden
15 TBBP-A in external case plastic parts of products (PCB is exempted) <1000ppm
16 Nickel in external case parts, which are likely to result in prolonged skin
exposure <1000ppm
17
Halogen-Free Product:
Brominated/chlorinated flame retardants (other than PBBs or PBDEs),
applicatable item: frame, bobbin, impeller, lear wire, connector, mylar
insulator.
Br<900ppm
Cl<900ppm
Br+Cl<1500ppm
18 PAHs and its 16 compounds in unusual contact material
BaP < 20ppm
16 compounds total
content < 200ppm
19 PCB and electroplating material, PFOS content complianced with
2006/122/EC
PFOS <1000ppm;
coating material
PFOS < 1µg/m 2
PAGE 7 OF 7
SPEC. NO. C01000730F-01
ISSUED DATE 02. 18. 2012
EDITION 0
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD.
建準電機工業股份有限公司
REVISION DATE
Declaration of Restricted Materials
2012.02.20
