REVISIONS PART NO. MCEMR Series PCB Layout This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC MULTICOMP is the registered trademark of the Group. (c) Premier Farnell plc 2008. ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE APPRVD DATE - A RELEASED Siva 07/3/08 Suresh 07/3/08 G. C 21/3/08 Dimensions : Millimetres (Inches) TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. DRAWING TITLE: DRAWN BY: Siva DATE: 07/03/08 CHECKED BY: DATE: 07/03/08 SIZE DATE: 21/03/08 SCALE: NTS Suresh APPROVED BY: G.Cook Dual In Line Switches - End Stackable A DWG NO. M10000814 U.O.M.: mm (Inches) REV ELECTRONIC FILE A EI(M)R-V_DWG SHEET: 1 OF 3 REVISIONS PART NO. MCEMR Series ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE APPRVD DATE - A RELEASED Siva 07/3/08 Suresh 07/3/08 G. C 21/3/08 Specifications: Mechanical: Mechanical life Maximum operating force Stroke Operating temperature Storage temperature : : : : : 2,000 operations. 1,000gf. 1.0mm. -20C to +85C. -40C to +85C. Electrical: Electrical life Rating Minimum Contact resistance Maximum Insulation resistance Dielectric strength Circuit : : : : : : 2,000 cycles. 25mA, 24V dc. 100m at 500V dc. 100M at 500V dc. 500V ac/1 minute. 1 pole throw. Material: Base and cover Actuator Contact Terminal Tape : UL 94V-0 Nylon high temperature thermoplastic. Colour : Black. : UL 94V-0 LCP high temperature thermoplastic. Colour : White. : Alloy copper with gold plated. : Brass with gold plated. : Kapton. Reflow Temperature Profile Soldering Process: Wave soldering : Recommended solder temperature at 500F (260C) maximum 5 seconds for through hole type. Hand soldering : Use a soldering iron of 30 watts, controlled at 350C approximately maximum 5 seconds while applying. Reflow Soldering : When applying reflow soldering, the peak temperature or the reflow oven should be set at 260C maximum. Do not wash the switch except top tape sealed type, which suitable for spray cleaning method from top of the s/w. This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC MULTICOMP is the registered trademark of the Group. (c) Premier Farnell plc 2008. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. DRAWING TITLE: DRAWN BY: Siva DATE: 07/03/08 CHECKED BY: DATE: 07/03/08 SIZE DATE: 21/03/08 SCALE: NTS Suresh APPROVED BY: G.Cook Dual In Line Switches - End Stackable A DWG NO. M10000814 U.O.M.: mm (Inches) REV ELECTRONIC FILE A EI(M)R-V_DWG SHEET: 2 OF 3 REVISIONS PART NO. ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE APPRVD DATE - A RELEASED Siva 07/3/08 Suresh 07/3/08 G. C 21/3/08 MCEMR Series Specifications Table Number of Positions A B 2 4.98 (0.196) 2.54 (0.100) MCEMR-02-T 3 7.52 (0.296) 5.08 (0.200) MCEMR-03-T 4 10.06 (0.396) 7.62 (0.300) MCEMR-04-T 5 12.60 (0.496) 10.16 (0.400) MCEMR-05-T 6 15.14 (0.596) 12.70 (0.500) MCEMR-06-T 7 17.68 (0.696) 15.24 (0.600) MCEMR-07-T 8 20.22 (0.796) 17.78 (0.700) MCEMR-08-T 9 22.76 (0.896) 20.32 (0.800) MCEMR-09-T 10 25.3 (0.996) 22.86 (0.900) MCEMR-10-T 12 30.38 (1.196) 27.94 (1.100) MCEMR-12-T Part Number Dimensions: Millimetres (Inches) Part Number Explanation MC E M R Type End-Stackable Dip Switch. Terminal Type Actuator Type Terminal Type Actuator Type Number of Positions Seal Tape - 02 - Number of Positions T Seal Tape : M = SMT Type : R = Recessed Actuator : 02, 03, 04 05, 06, 07, 08, 09, 10, 12 Positions. : T = Top Tape Sealed (For Recessed Actuator only) This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC MULTICOMP is the registered trademark of the Group. (c) Premier Farnell plc 2008. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. http://www.farnell.com http://www.newark.com http://www.cpc.co.uk DRAWING TITLE: DRAWN BY: Siva DATE: 07/03/08 CHECKED BY: DATE: 07/03/08 SIZE DATE: 21/03/08 SCALE: NTS Suresh APPROVED BY: G.Cook Dual In Line Switches - End Stackable A DWG NO. M10000814 U.O.M.: mm (Inches) REV ELECTRONIC FILE A EI(M)R-V_DWG SHEET: 3 OF 3