Thyristor Module PSET 132/08-18
ITAVM = 132 A
VRRM = 600-1800V
Preliminary Data Sheet
Features
•Isolation voltage 3600 V∼
•Planar glass passivated chips
•Low forward voltage drop
•Leads suitable for PC board
soldering
•UL registered, E 148688
Applications
•DC motor control
•Light and temperature control
•Softstart AC motor controller
•Solid state switches
Advantages
•Easy to mount with two screws
•Space and weight savings
•Improved temperature and power
cycling capability
•High power density
•Small and light weight
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
ECO-PACTM 2
2003 POWERSEM reserves the right to change limits, test conditions and dimensions
Symbol Test Conditions Maximum Ratings
Data according to IEC 60747 refer to a single thyristor
unless otherwise stated.
ITAVM TC = 85 °C, 180° sine 132 A
ITSM TVJ = 45 °C t = 10 ms (50 Hz), sine 3600 A
VR = 0 t = 8.3 ms (60 Hz), sine 3850 A
TVJ = 125 °C t = 10 ms (50 Hz), sine 3200 A
VR = 0 t = 8.3 ms (60 Hz), sine 3420 A
∫∫
∫∫
∫ i2 dt TVJ = 45 °C t = 10 ms (50 Hz), sine 64800 A²s
VR = 0 t = 8.3 ms (60 Hz), sine 62300 A²s
TVJ = 125 °C t = 10 ms (50 Hz), sine 51200 A²s
VR = 0 t = 8.3 ms (60 Hz), sine 49100 A²s
(di/dt)cr TVJ = 125 °C repetitive, IT = 250 A 150 A/µs
f=50Hz, tP=200µs
VD=2/3VDRM
IG=0.5 A non repetitive,IT = ITAVM 500 A/µs
diG/dt=0.5A/µs
(dv/dt)cr TVJ = 125 °C VD=2/3VDRM 1000 V/µs
RGK= ∞, method 1 (linear voltage rise)
PGM TVJ = 125 °C tP= 30µs ≤ 10 W
IT =ITAVM tP=300µs ≤ 5 W
PGAVM 0.5 W
VRGM 10 V
TVJ -40... + 130 °C
TVJM for 10 sec 150 °C
Tstg -40... + 125 °C
VISOL 50/60 Hz, RMS t = 1 min 3000 V∼
IISOL ≤ 1 mA t = 1 s 3600 V∼
MdMounting torque (M4) 1.5 - 2.0 Nm
14 - 18 lb.in.
Weight typ. 24 g
VRSM VRRM Type
VDSM VDRM
(V) (V)
900 800 PSET 132/08
1300 1200 PSET 132/12
1500 1400 PSET 132/14
1700 1600 PSET 132/16
1900 1800 PSET 132/18
K- 1 2
ACE-1
SVX- 1 8
E- 3
http://store.iiic.cc/
PSET 132
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
2003 POWERSEM reserves the right to change limits, test conditions and dimensions
Symbol Test Conditions Characteristic Value
ID,IRTVJ = 125°C, VR = VRRM, VD=VDRM ≤ 10 mA
VTIT = 200 A, TVJ = 25 °C ≤ 1.3 V
VTO For power-loss calculations only 0.8 V
rT 1.65 mΩ
VGT VD=6V TVJ= 25°C ≤ 1.5 V
TVJ=-40°C ≤ 1.6 V
IGT VD=6V TVJ= 25°C ≤ 300 mA
TVJ=-40°C ≤ 400 mA
VGD TVJ= 125°C VD=2/3VDRM ≤ 0.2 V
IGD TVJ= 125°C VD=2/3VDRM ≤ 10 mA
ILTVJ= 25°C, tP=10µs ≤ 450 mA
IG=0.5A, diG/dt=0.5A/µs
IHTVJ= 25°C, VD=6V, RGK= ∞≤ 200 mA
tgd TVJ= 25°C, VD=1/2VDRM ≤ 2 µs
IG=0.5A, diG/dt=0.5A/µs
RthJC per thyristor; DC, max. 0.25 K/W
per module, max. 0.125 K/W
RthJK per thyristor; sine 180° el, typ. 0.35 K/W
per module, typ. 0.175 K/W
dsCreeping distance on surface 11.2 mm
dACreeping distance in air 5.0 mm
aMax. allowable acceleration 50 m/s²
Package style and outline
Dimensions in mm (1mm = 0.0394“)
http://store.iiic.cc/
