ECO-PACTM 2 Thyristor Module PSET 132/08-18 ITAVM VRRM = 132 A = 600-1800V Preliminary Data Sheet VRSM VDSM (V) 900 1300 1500 1700 1900 VRRM VDRM (V) 800 1200 1400 1600 1800 Type ACE-1 PSET 132/08 PSET 132/12 PSET 132/14 PSET 132/16 PSET 132/18 E-3 K-12 SVX-18 Symbol Test Conditions ITAVM ITSM TC = 85 C, 180 sine 132 A TVJ = 45 C t = 10 ms (50 Hz), sine 3600 A VR = 0 t = 8.3 ms (60 Hz), sine 3850 A TVJ = 125 C t = 10 ms (50 Hz), sine 3200 A VR = 0 t = 8.3 ms (60 Hz), sine 3420 A TVJ = 45 C t = 10 ms (50 Hz), sine 64800 VR = 0 i2 dt (di/dt)cr Maximum Ratings As t = 8.3 ms (60 Hz), sine 62300 As TVJ = 125 C t = 10 ms (50 Hz), sine 51200 As VR = 0 49100 As 150 A/s t = 8.3 ms (60 Hz), sine TVJ = 125 C repetitive, IT = 250 A f=50Hz, tP=200s VD=2/3VDRM IG=0.5 A non repetitive,IT = ITAVM 500 TVJ = 125 C VD=2/3VDRM 1000 V/s TVJ = 125 C tP= 30s 10 W IT =ITAVM 5 W PGAVM VRGM TVJ TVJM Tstg VISOL 0.5 W tP=300s 10 V -40... + 130 150 for 10 sec -40... + 125 C 3000 V IISOL 1 mA 3600 Md Mounting torque Weight typ. (M4) * UL registered, E 148688 Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering Applications * * * * DC motor control Light and temperature control Softstart AC motor controller Solid state switches 1.5 - 2.0 14 - 18 24 * * * * * Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability High power density Small and light weight C C 50/60 Hz, RMS t = 1 min t=1s Isolation voltage 3600 V Advantages RGK= , method 1 (linear voltage rise) PGM * * * * A/s diG/dt=0.5A/s (dv/dt)cr Features V Nm lb.in. g Data according to IEC 60747 refer to a single thyristor unless otherwise stated. 2003 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 http://store.iiic.cc/ PSET 132 Symbol Test Conditions ID,I R VT VTO rT VGT TVJ = 125C, VR = VRRM, VD=VDRM IT = 200 A, VD=6V TVJ= 25C TVJ=-40C 1.6 V IGT VD=6V TVJ= 25C 300 mA TVJ=-40C 400 mA TVJ= 125C VD=2/3VDRM 0.2 V TVJ= 125C VD=2/3VDRM 10 mA 450 mA TVJ= 25C, VD=6V, RGK= 200 mA TVJ= 25C, VD=1/2VDRM 2 s VGD IGD IL Characteristic Value TVJ = 25 C For power-loss calculations only TVJ= 25C, tP=10s 10 mA 1.3 V 0.8 V 1.65 m 1.5 V IG=0.5A, diG/dt=0.5A/s IH tgd IG=0.5A, diG/dt=0.5A/s RthJC RthJK ds dA a per thyristor; DC, max. per module, max. per thyristor; sine 180 el, typ. 0.25 0.125 0.35 K/W K/W K/W per module, typ. 0.175 K/W Creeping distance on surface Creeping distance in air Max. allowable acceleration 11.2 5.0 50 mm mm m/s Package style and outline Dimensions in mm (1mm = 0.0394") 2003 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 http://store.iiic.cc/