Photoelectric Sensor with Built-in Amplifier with New Connector Options E3Z Compact Sensor Offers Long Sensing Distance and Superior Noise-Immunity D D D D D D Photo-IC provides long sensing distance: 15 m and 10 m for through-beam, 4 m for retroreflective, and 1 m for diffuse. Integrated Photo-IC improves noise immunity to interference from inverters and other inductive loads. New injection molding technology assures IP67 rating to withstand water and dust. Switch-selectable, Light-ON/Dark-ON operation. M8 connector-ready and 2 m, pre-wired models. NPN or PNP output models available. Ordering Information J Sensors Stock Note: Shaded models are normally stocked. Sensing g method Light g source Through-beam g IR/RED / Appearance pp Connection method Sensing g distance Pre-wired 15 m (IR) ( ) 10 m (RED) (See Note 1.) 1) Connector Pigtail 3 pin (M8) Polarized retroreflective fl i RED PNP output E3Z-T61(A) E3Z-T81(A) E3Z-T66(A) E3Z-T86(A) E3Z--T61(A)--M5J E3Z--T81(A)--M5J E3Z--T61(A)--M3J E3Z--T81(A)--M3J Pigtail 4 pin (M12) E3Z--T61(A)--M1J E3Z--T81(A)--M1J E3Z-R61 E3Z-R81 E3Z-R66 E3Z-R86 E3Z--R61--M5J E3Z--R81--M5J Pigtail 4 pin (M8) E3Z--R61--M3J E3Z--R81--M3J Pigtail 4 pin (M12) E3Z--R61--M1J E3Z--R81--M1J E3Z-D61 E3Z-D81 E3Z-D66 E3Z-D86 Pigtail 3 pin (M8) E3Z--D61--M5J E3Z--D81--M5J Pigtail 4 pin (M8) E3Z--D61--M3J E3Z--D81--M3J Pigtail 4 pin (M12) E3Z--D61--M1J E3Z--D81--M1J E3Z-D62 E3Z-D82 Connector E3Z-D67 E3Z-D87 Pigtail 3 pin (M8) E3Z--D62--M5J E3Z--D82--M5J Pigtail 4 pin (M8) E3Z--D62--M3J E3Z--D82--M3J Pigtail 4 pin (M12) E3Z--D62--M1J E3Z--D82--M1J ((See Note 2.)) Pre-wired Connector IR NPN output Pigtail 4 pin (M8) Pigtail 3 pin (M8) Diffuse reflective fl i Model Pre-wired Connector Pre-wired 100 mm to 4 m 100 mm to 3 m (See Note 3.) 3) 5 to 100 mm ( id view) (wide i ) 1m Note: 1. Model numbers that end with (A) are red LED versions. 2. The Reflector is sold separately. Select the Reflector model most suited to the application. 3. Sensing distance can be extended to 4 meters when the E39-R1S reflector is used. The sensing distance is 3 meters when the E39-R1 reflector is used. Photoelectric Sensor with Built-in Amplifier E3Z 1 J Accessories (order separately) Stock Note: Shaded models are normally stocked. Slit for Through-beam Models (E3Z--Tjj) Order a slit for each emitter and receiver. Slit width Sensing distance (typical) Minimum sensing object (typical) Model 0.5 mm dia. 50 mm 0.5 mm dia. E39-S65A 1 mm dia. 200 mm 1 mm dia. E39-S65B 2 mm dia. 800 mm 2 mm dia. E39-S65C 0.5x10 mm 1m 0.7 mm dia. E39-S65D 1x10 mm 2.2 m 1.2 mm dia. E39-S65E 2x10 mm 5m 2.4 mm dia. E39-S65F J Reflectors for Retroreflective Models Stock Note: Shaded models are normally stocked. Name Sensing distance (typical) Model Reflector 100 mm to 3 m E39-R1 100 mm to 4 m E39-R1S 100 mm to 5 m E39-R2 100 mm to 2.5 m E39-R9 100 mm to 3.5 m E39-R10 Miniature Reflector 50 mm to 1.5 m E39-R3 Tape p Reflector 150 mm to 700 mm E39-RS1 150 mm to 1.1 m E39-RS2 150 mm to 1.4 m E39-RS3 Note: The actual sensing distance may be reduced to approximately 70% of the typical sensing distance when using a Reflector other than the E39-R1 or the E39-R1S. 2 Photoelectric Sensor with Built-in Amplifier E3Z J Mounting Brackets Stock Note: Shaded models are normally stocked. Appearance Description Model L-bracket, horizontal E39-L104 L-bracket, vertical Appearance Description Model Adjustable height and angle bracket for sensors; horizontal mounting rotates every 45 degrees E39-L93FH Mounted to the aluminum frame rails of conveyors, easily adjustable E39-L44 Open top, 20 angle adjustability E39-L43 Protected top 5 angle adjustability E39-L144 Compact vertical protective cover bracket E39-L142 Vertical protective cover bracket E39-L98 Adjustable height and angle bracket for sensors; vertical mounting rotates every 45 degrees E39-L93FV Adjustable height and angle bracket for sensors; fixed horizontal base mounting E39-L93H Adjustable height and angle bracket for sensors; fixed vertical base mounting E39-L93V Adjustable height and angle bracket for sensors; free range of X and Y axis positioning; no base included for vertical post E39-L93XY Note: If a through-beam model is used, order two Mounting Brackets -- one for the emitter and one for the receiver. Photoelectric Sensor with Built-in Amplifier E3Z 3 J M8 CONNECTORS Appearance Cable type Straight g 2 m (6.56 ft) Right g angle g Model Four-wire type yp XS3F-M421-405-A 2 m (6.56 ft) XS3F-M422-402-A 5 m (16.40 ft) Straight g 2 m (6.56 ft) Right g angle g XS3F-M421-402-A 5 m (16.40 ft) XS3F-M422-405-A Three--wire type yp Y96E--M833SD2 5 m (16.40 ft) Y96E--M833SD5 2 m (6.56 ft) Y96E--M833RD2 5 m (16.40 ft) Y96E--M833RD5 J M12 CONNECTORS Appearance Cable type Straight g 2 m (6.56 ft) Right g angle g 4 Model Four-wire type yp Y96E--44SD2 5 m (16.40 ft) Y96E--44SD5 2 m (6.56 ft) Y96E--44RD2 5 m (16.40 ft) Y96E--44RD5 Photoelectric Sensor with Built-in Amplifier E3Z Specifications Item Sensing method Through-beam Polarized retroreflective Diffuse reflective NPN output E3Z-T61/T66 (A) (Note 3) E3Z-R61/R66 E3Z-D61/D66 E3Z-D62/D67 PNP output E3Z-T81/T86 (A) (Note 3) E3Z-R81/R86 E3Z-D81/D86 E3Z-D82/D87 15 m 10 m (A) (Note 3) 100 mm (4 m Note 1) (when using E39-R1S) White paper (100x100 mm): 100 mm White paper (300x300 mm): 1m Opaque: 12 mm (dia. min.) Opaque: 75 mm (dia. min.) Sensing distance Standard sensing object 100 mm (3 m Note 2) (when using E39-R1) --- Hysteresis --- Directional angle Both emitter and receiver: 3 to 15 2 to 10 20% max. of setting distance --- Light source (wave length) Infrared LED (870 nm) Red LED (660 nm) Infrared LED (860 nm) Power supply voltage 12 to 24 VDC 10% including 10% (p-p) max. ripple Current consumption Emitter: 15 mA Receiver: 20 mA Control output 100 mA max. at 26.4 VDC, open collector output (residual voltage: 2 V max.) < 10 mA (residual voltage: 1 V max.) L-ON/D-ON, switch selectable Circuit protection Load short-circuit, reversed power supply protection, and output reverse protection Response time 1 ms max. 30 mA max. Reversed power supply connection, output short-circuit, and mutual interference protection, and output reverse protection Sensitivity adjustment One-turn potentiometer Ambient illumination (receiver side) Incandescent lamp 3,000 max. Sunlight 10,000 max. Ambient temperature Operating --25C to 55C (--13F to 131F) Storage --40C to 70C (--40F to 158F) with no icing or condensation Ambient h idi humidity Operating 35% to 85% Storage 35% to 95% with no condensation Insulation resistance 20 M min. at 500 VDC Dielectric strength 1,000 VAC, 50/60 Hz for 1 min Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude or 300 m/s2 for 2 hours each in X, Y, and Z axes Shock resistance 500 m/s2 3 times each in X, Y, and Z axes Destruction Enclosure rating IP67 (IEC60529) 1200 PSI Washdown (NEMA ICS5, ANNEX F) Approvals CE Connection method 2 m cable or M8 connector Indicator Operation indicator (orange) Stability indicator (green) Emitter has power indicator (orange) only Weight (packed state) Pre-wired cable (2 m) Approx. 120 g (4.2 oz) Approx. 65 g (2.3 oz) Connector Approx. 30 g (1.1 oz) Approx. 20 g (0.7 oz) Material Case: PBT (polybutylene terephthalate); Lens: Denatured polyallylate Accessories Instruction manual (Order Reflector and Mounting Bracket separately.) Note: 1. Sensing distance can be extended up to 4 meters when the E39-R1S reflector is used. 2. Sensing distance can be extended up to 3 meters when the E39-R1 reflector is used. 3. Sensing distance is 10 meters when using the (A) versions (visible red LED, 660 nm). Photoelectric Sensor with Built-in Amplifier E3Z 5 Nomenclature Through-beam Models E3Z-T6j Receiver Retroreflective Models E3Z-R6j Operation indicator (orange) Stability indicator (green) Sensitivity adjuster Diffuse-reflective Models E3Z-D6j Operation selector Operation J Output Circuits Model E3Z-T61/-T66/-R61/-R66/-D61/-D66/-D62/-D67 NPN output Through-beam receiver Retroreflective model Diffuse reflective model Through-beam emitter Power indicator (orange) Operation indicator Orange Brown Green Control output Main circuit Brown 12 to 24 VDC Stability indicator 100 mA Black max. Load (Relay) Main circuit 12 to 24 VDC Blue 0V Blue Model E3Z-T81/-T86/-R86/-D81/-D86/-D82/-D87 PNP output Through-beam receiver Retroreflective model Diffuse reflective model Through-beam emitter Power indicator (orange) Brown Operation indicator Orange Brown 12 to 24 VDC Stability indicator Green Black Main circuit Control output Blue 100 mA max. Main circuit Load (Relay) 12 to 24 VDC 0V Blue Connector pin arrangement Pins 2, 4 are open. Pin 2 is open. J Timing Charts Light-ON (L-ON) Operation Dark-ON (D-ON) Operation Incident Interrupted Operation indicator (orange) Output transistor Load (relay) Incident Interrupted ON OFF ON OFF Operate Operation indicator (orange) OFF Output transistor OFF Load (relay) Reset (Between blue and black) 6 Photoelectric Sensor with Built-in Amplifier E3Z ON ON Operate Reset (Between blue and black) J M8 Connector PIN--OUT (4--Pin) (3--Pin) Wire colors Wire colors Brown White Blue Black Brown Blue Black XS3F-M421-402-A XS3F-M421-405-A XS3F-M422-402-A XS3F-M422-405-A Y96E--M833SD2 Y96E--M833SD5 Classification Wire color Connector pin No. Description DC Brown 1 Power supply (+V) White 2 Pin 2 is not used. Blue 3 Power supply (0 V) Black 4 Output Y96E--M833RD2 Y96E--M833RD5 Note: The through-beam emitter does not use pins 2 and 4. J M12 Connector PIN--OUT (4--Pin) Wire colors Brown White Blue Black Y96E--44SD2 Y96E--44SD5 Y96E--44RD2 Y96E--44RD5 Classification Wire color Connector pin No. Description DC Brown 1 Power supply (+V) White 2 Pin 2 is not used. Blue 3 Power supply (0 V) Black 4 Output Note: The through-beam emitter does not use pins 2 and 4. Photoelectric Sensor with Built-in Amplifier E3Z 7 Engineering Data J Parallel Operating Range (typical) Through-beam Models Through-beam Models E3Z-Tj1 (Tj6) Retroreflective Models E3Z-Tj1 (Tj6) and Slit E3Z-Rj1 (Rj6) and Reflector E39-RS3 2-dia. slit Distance X (m) Distance Y (mm) Distance X (m) Distance Y (mm) Distance Y (mm) E39-RS2 E39-RS1 Distance X (m) Slit: 1 x 10 1-dia. slit Slit: 0.5 x 10 E39-R2 Slit: 2 x 10 E39-R3 E39-R1S E39-R1 Parallel Operating Range (Typical) E3Z-TjA Receiver Output vs. Distance (Typical) E3Z-TjA J Operating Range (typical) Diffuse Reflective Models Diffuse Reflective Models Distance X (mm) Black carbon White drawing paper 8 E3Z-Dj2 (Dj7) Distance Y (mm) Distance Y (mm) E3Z-Dj1 (Dj6) Distance X (m) White drawing paper SUS (glossy surface) Photoelectric Sensor with Built-in Amplifier Black carbon E3Z SUS (glossy surface) J Excess Gain Ratio vs. Distance (typical) Through-beam Models Retroreflective Models E3Z-Tj1 (Tj6) Diffuse Reflective Models E3Z-Rj1 (Rj6) and Reflector E3Z-Dj1 (Dj6) E39-R2 E39-R3 Excess gain ratio Excess gain ratio Excess gain ratio Sensing target: 100 x 100 mm white paper E39-R1S E39-R1 Distance X (mm) Distance X (m) Distance X (m) Diffuse Reflective Model E3Z-Dj2 (Dj7) Excess gain ratio Sensing target: 300 x 300 mm white paper Distance X (m) J Sensing Target Size vs. Sensing Distance (typical) Diffuse Reflective Models Diffuse Reflective Models E3Z-Dj1 (Dj6) E3Z-Dj2 (Dj7) SUS (glossy surface) SUS (glossy surface) Distance (m) Distance (mm) White paper White paper Black paper Black paper Side length (one side) of sensing target: d (mm) Side length (one side) of sensing target: d (mm) Photoelectric Sensor with Built-in Amplifier E3Z 9 Dimensions Unit: mm (inch) J Sensors Through-beam (Pre-wired Models) E3Z-T61 E3Z-T81 10.8 (0.43) Emitter Power indicator (orange) 17 (0.67) Lens Optical axis 31 (1.22) 31 (1.22) Two, M3 Two, M3 Vinyl-insulated round cable with two conductors, 4 dia. (0.2 mm2 with 1.1-dia. insulator); standard length: 2m M8 connector 20 (0.79) 20 (0.79) Power indicator (orange) Power indicator (orange) 10.8 (0.43) Stability indicator (green) Receiver Optical axis 10.8 (0.43) Operation selector Sensing adjuster 17 (0.67) Lens 20 (0.79) 10.8 (0.43) Emitter Power indicator (orange) 17 (0.67) Lens Optical axis 20 (0.79) Through-beam (Connector Models) E3Z-T66 E3Z-T86 Receiver Stability indicator (green) 17 (0.67) Lens Optical axis Operation selector Sensing adjuster 31 (1.22) 31 (1.22) Two, M3 Two, M3 Vinyl-insulated round cable with three conductors, 4 dia. (0.2 mm2 with 1.1-dia. insulator); standard length: 2m M8 connector Retroreflective Models (Pre-wired Models) E3Z-R61 E3Z-R81 Retroreflective Models (Connector Models) E3Z-R66 E3Z-R86 Diffuse Reflective Models (Pre-wired Models) E3Z-D61 20 (0.79) E3Z-D62 E3Z-D81 Power indicator (orange) E3Z-D82 Diffuse Reflective Models (Connector Models) 20 E3Z-D66 (0.79) E3Z-D67 Power indicator (orange) E3Z-D86 E3Z-D87 10.8 (0.43) 10.8 (0.43) Operation selector Stability indicator Sensing adjuster (green) 17 Two, 7-dia. lenses (0.67) Receiver Optical axis Stability indicator (green) Two, 7-dia. lenses Receiver Optical axis Emitter Two, M3 Vinyl-insulated round cable with three conductors, 4 dia. (0.2 mm2 with 1.1-dia. insulator); standard length: 2m Photoelectric Sensor with Built-in Amplifier Two, M3 M8 connector Note: Length of pigtails: 03. m 10 17 (0.67) 31 (1.22) 31 (1.22) Emitter Operation selector Sensing adjuster E3Z Unit: mm (inch) J Slits E39-S65A E39-S65B E39-S65C E39-S65D E39-S65E E39-S65F 10.4 (0.41) 10.4 (0.41) 32.2 (1.27) 32.2 (1.27) 15.5 (0.61) 15.5 (0.61) Model Side A Material Model Side A Material E39-S65A E39-S65B E39-S65C 0.5 dia. 1.0 dia. 2.0 dia. SUS301 stainless steel E39-S65D E39-S65E E39-S65F 0.5 1.0 2.0 SUS301 stainless steel J Reflectors E39-R1 E39-R1S Two, 3.5 dia. 40.3 (1.59) 34 (1.34) 7.5 (0.30) 5.2 (2.05) 59.9 (2.36) Material Surface: Acrylic resin Backside: ABS resin 2.7 (0.11) 1.6 (0.06) E39-R2 Four, 3.5 dia. 80.8 (3.18) 74.5 (2.93) 7 7.5 (0.30) 7 8 59.9 (2.36) 52 (2.05) Material Surface: Acrylic resin Backside: ABS resin 1.6 (0.06) E39-R9 7 (0.28) 6.5 (0.26) 2.7 (0.11) 34 (1.34) 30.9 (1.22) 42.3 (1.67) 21 8 (0.31) 4 (0.16) Material Reflecting surface: Acrylic resin Back: ABS resin 3.5 (0.14) 5.5 (0.22) 15 25 (0.98) 35.4 (1.39) 8 (0.31) Photoelectric Sensor with Built-in Amplifier E3Z 11 E39-R10 47 (1.85) 61.4 (2.42) 30.4 (1.20) 10 (0.39) Material Reflecting surface: Acrylic resin Back: ABS resin 30 (1.18) 40 (1.57) 51.6 (2.03) 5 (0.20) 3.5 (0.14) 5.5 (0.22) 8 (0.31) J Miniature Reflector E39-R3 29 (1.14) 6 3.4 4.5 3.4 14 7 13.7 (0.54) 18.45 22.9 (0.90) Material Surface: Acrylic resin Backside: ABS resin 20 (0.79) 41.8 (1.65) 25.4 (1.00) Two, M3 Two, 3.2 dia. Adhesive tape side 11 22.5 (0.89) 19.3 0.2 0.2 16 (0.63) 34.8 (1.37) 34 (1.34) 38 (1.50) 10.1 (0.40) 1.2 3.4 2.6 1.2 10 SUS304 stainless steel J Tape Reflectors E39-RS1 E39-RS3 35 (1.38) Material: Acrylic resin 0.6 (0.02) 10 (0.39) 80 (3.15) 0.6 (0.02) Adhesive tape side E39-RS2 40 (1.57) 0.6 (0.02) 70 (2.76) 35 (1.38) Material: Acrylic resin 12 Adhesive tape side Material: Acrylic resin Photoelectric Sensor with Built-in Amplifier Adhesive tape side E3Z Unit: mm (inch) J Mounting Brackets E39-L104 29 (1.14) 13.7 (0.54) 13.7 (0.54) With Mounting Bracket (E3Z-D62) 7 (0.28) 29 (1.14) 16 (0.63) Two, 3.2 dia. Material: SUS304 stainless steel Two, M3 Optical axis 31 (1.22) 39 (1.54) 37.8 25.4 (1.00) 38.3 (1.51) 8.8 (0.35) 1.2 (0.05) E39-L43 3.5 (0.14) Four, 3.2 dia. 30 (1.18) 3.5 (0.14) 3.5 (0.14) 25.4 (1.00) 40 (1.57) 15 (0.59) 7.5 (0.3) Material: SUS304 stainless steel With Mounting Bracket (E3Z-D62) 20 (0.79) 30 (1.18) 3.5 (0.14) 25.4 (1.00) 40 (1.57) Optical axis 7.5 (0.3) 15 (0.59) 1.2 (0.05) 13 (0.51) 13 (0.51) E39-L44 With Mounting Bracket (E3Z-D62) 8.7 (0.34) 1.2 (0.05) Material: SUS304 stainless steel Two, M3 16.2 (0.64) 9 (0.35) 18 (0.71) 23.2 (0.91) 3.2 dia. 31.2 (1.23) 23.2 (0.91) 36 (1.42) 10.8 (0.43) 20 (0.79) 14.1 (0.56) Two, M3 Optical axis 25.4 (1.00) 31 (1.22) 35.3 (1.39) 36 (1.42) 31.2 (1.23) Photoelectric Sensor with Built-in Amplifier 9 (0.35) 18 (0.71) 8.7 (0.34) 16.2 (0.64) E3Z 13 E39-L144 With Sensor (Example: E3Z-L61) 25 (0.98) 21 2-50 23 (0.91) 10.5 (0.41) 14.2 (0.56) 12.3 (0.48) Optical axis 38.5 (1.52) 1.5 (0.06) Material: SUS304 stainless steel 25.4 (1.00) 20 (0.79) 5 8.7 (0.34) 22 (0.87) 14 (0.55) 15.8 (0.62) 37 (1.46) 6.9 (0.27) Four 3.4 dia. Optical axis 25.4 (1.00) 55 (0.22) 14 1.5 (0.06) 4.5 12 (0.47) 4.5 5.0 4.0 4.5 7.8 14 With Sensor (Example: E3Z-L61) 7 15.3 (0.60) Material: SUS304 stainless steel 25.4 (1.00) 7.3 (0.28) 14 (0.55) E39-L142 3.5 (0.14) Photoelectric Sensor with Built-in Amplifier E3Z 28 (1.10) Unit: mm (inch) E39-L93FH 26 48 (1.89) 20.7 8 15 15 215 (8.46) O12 188 (7.40) 183 (7.20) 54 59 (2.32) 30 6 35 2--O6.6 50 (1.97) 45 26 22.5 48 E39-L93FV 26.1 48 (1.89) 20.7 8 15 15 208 (8.19) O12 181 (7.13) 176 (6.93) 53 (2.09) 48 24 12 35 2--O6.6 50 22.5 53 (2.09) 29 Photoelectric Sensor with Built-in Amplifier E3Z 15 E39-L93H 26.1 48 (1.89) 20.7 8 15 15 216 (8.50) O12 189 (7.44) 184 (7.24) 54 59 (2.32) 30 8 2--O6.6 34 27 10 14 32 45 E39-L93V 26.1 48 (1.89) 20.7 8 15 15 O12 208 (8.19) 176 (6.93) 181 (7.13) 49 (1.93) 44 20 10 32 46 48 (1.89) 24 16 15 Photoelectric Sensor with Built-in Amplifier 8 E3Z 2--O6.6 Unit: mm (inch) E39-L93XY 197 (7.76) 165 8 22 20 35 15 21 40 (1.51) 170 (6.69) 15 15 26 8 24 11 48 O12 189 (7.44) 213 (8.39) O12 Note: The E39-L93XY consists of a vertical post, x-y joint, 2 nuts, 2 bolts and sensor mounting attachment. There is no base for the bottom of the vertical post. E39-L98 Mounting Holes Two, M6 56 dia. (2.2) (1.73|0.01) Material: SUS304 stainless steel Screw provided 61 (2.4) 25.4 (1.00) 20 (0.79) 35.3 (5.33) 16 (0.63) 56 (2.2) 34 (1.34) Photoelectric Sensor with Built-in Amplifier E3Z 17 J M8 Connector Cordsets (3--Pin) LENGTH .75" REF [19.05mm] 1.22" REF [31.00mm] Straight Y96E--M833SD2 Y96E--M833SD5 O.39" REF .16" REF [4.06mm] M8x1 [10.00mm] LENGTH .75" REF [19.05mm] 1.04" REF [26.50mm] Right Angle Y96E--M833RD2 Y96E--M833RD5 .72" REF [18.25mm] .16" REF [4.06mm] M8x1 O.39" REF [10.00mm] J M8 Connector Cordsets (4--Pin) 4 (0.16) dia. Straight XS3F-M421-402-A (L=2 m) XS3F-M421-405-A (L=5 m) 9 dia. (0.35) 21.5 (0.85) 31.4 (1.24) 23.1 (0.91) Right Angle XS3F-M422-402-A (L=2 m) XS3F-M422-405-A (L=5 m) 50 (1.97) 30 20.5 (0.81) 5 30 50 (1.97) 5 4 (0.16) dia. 9 (0.35) dia. 3.4 2.15 0.5 1.95 J M12 Connector Cordsets (4--Pin) 14.7 (0.58) 46.74 (1.84) Straight Y96E--44SD2 (L=2 m) Y96E--44SD5 (L=2 m) M12 thread Gold/palladium/ nickel--plated brass contaccts 14.7 (0.58) Right Angle Y96E--44RD2 (L=2 m) Y96E--44RD5 (L=2 m) 18 31.24 (1.23) M12 thread 1 -- Brown +V 3 -- Blue 0V 4 -- Black Output Gold/palladium/ nickel--plated brass contaccts Photoelectric Sensor with Built-in Amplifier 2 -- White Not Used E3Z Precautions To ensure safe sensor operation, please follow the following precautions: J Connections M8 Metal Connector J Wiring * * Power Supply Voltage Make sure that the power supply to the Sensor is within the rated voltage range. Load Short-circuiting Do not short-circuit the load, or the Sensor may be damaged. Polarity * * Turn off power before disconnecting the sensor. Remove the connector cover before connecting or disconnecting the metal connector. Secure the connector cover by hand. Do not use any pliers, or the connector may be damaged. The proper tightening torque range is between 0.3 and 0.4 N S m. Be sure to tighten the connector securely in order to maintain the the specified degree of protection and to keep the connector from loosening due to vibration. Correct polarity wiring is required to prevent damage to the sensor. J Mounting Connection Without Load Use M3 screws to mount the sensor and tighten each screw to a maximum torque of 0.53 N S m. Do not connect power supply to the Sensor with no load connected, or the internal elements may explode or burn. J Operating Environment Do not use the Sensor in locations with explosive or flammable gas. J Settings E3Z-jjj Power Reset Time E39-L104 Mounting Bracket (sold separately) The Sensor is ready to operate 100 ms after the Sensor is turned ON. If the load and Sensor are connected to independent power supplies respectively, be sure to turn ON the Sensor before turning the load ON. Photoelectric Sensor with Built-in Amplifier E3Z 19 J Adjustment Slits for Through-beam Models (E39-S65A/B/C/D/E/F) Sold Separately Hook Upper indented mounting portion Protruding portion Slit Lower indented portion Sensor Mounting Method 1. Hook the upper protruding portion of the Slit to the upper indented mounting portion of the Sensor and adjust the position of the Slit so that the Slit will be in parallel to the lens side of the Sensor. 2. Press the lower protruding portion of the Slit onto the indented mounting portion of the Sensor until the Slit snaps in. Mounting Condition Side View Removal Method 1. Press the upper portion of the Slit. 2. Disconnect the lower protruding portion of the Slit from the Sensor and remove the Slit. 20 Photoelectric Sensor with Built-in Amplifier E3Z Front View Certain Terms and Conditions of Sale 1 2 3 4 5 6 7 8 9 10 11 12 Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all catalogs, manuals or other documents, whether electronic or in writing, relating to the sale of goods or services (collectively, the "Goods") by Omron Electronics LLC and its subsidiary companies ("Seller"). Seller hereby objects to any terms or conditions proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. Please contact your Omron representative to confirm any additional terms for sales from your Omron company. Prices. All prices stated are current, subject to change without notice by Seller. Buyer agrees to pay the price in effect at time of shipment. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Seller's payment terms and (ii) Buyer has no past due amounts owing to Seller. Orders. Seller will accept no order less than $200 net billing. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Goods. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Seller or required to be collected directly or indirectly by Seller for the manufacture, production, sale, delivery, importation, consumption or use of the Goods sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Seller, Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Goods sold hereunder and stop any Goods in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Seller fully against all costs or expenses arising in connection therewith. Force Majeure. Seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller: a. Shipments shall be by a carrier selected by Seller; b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Goods shall be FOB shipping point (unless otherwise stated in writing by Seller), at which point title to and all risk of loss of the Goods shall pass from Seller to Buyer, provided that Seller shall retain a security interest in the Goods until the full purchase price is paid by Buyer; d. Delivery and shipping dates are estimates only. e. Seller will package Goods as it deems proper for protection against normal handling and extra charges apply to special conditions. Claims. Any claim by Buyer against Seller for shortage or damage to the Goods occurring before delivery to the carrier must be presented in writing to Seller within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Goods from Seller in the condition claimed. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the Goods will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller (or such other period expressed in 13 14 15 16 writing by Seller). Seller disclaims all other warranties, express or implied. (b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON--INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE GOODS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE GOODS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Seller further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Goods or otherwise of any intellectual property right. (c) Buyer Remedy. Seller's sole obligation hereunder shall be to replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non--complying Good or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Good; provided that in no event shall Seller be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Goods unless Seller's analysis confirms that the Goods were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any goods by Buyer must be approved in writing by Seller before shipment. Seller shall not be liable for the suitability or unsuitability or the results from the use of Goods in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. Damage Limits; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE GOODS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Seller exceed the individual price of the Good on which liability is asserted. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and its employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Goods. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Good made to Buyer specifications infringed intellectual property rights of another party. Property; Confidentiality. The intellectual property embodied in the Goods is the exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials supplied by Seller to Buyer relating to the Goods are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any right and no course of dealing between Buyer and Seller shall operate as a waiver of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder without Seller's written consent. (c) Amendment. These Terms constitute the entire agreement between Buyer and Seller relating to the Goods, and no provision may be changed or waived unless in writing signed by the parties. (d) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (e) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (f) As used herein, "including" means "including without limitation". Certain Precautions on Specifications and Use 1. Suitability of Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Good in the Buyer's application or use of the Good. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Good. This information by itself is not sufficient for a complete determination of the suitability of the Good in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of this Good, nor is it intended to imply that the uses listed may be suitable for this Good: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Good. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE SELLER'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable Good, or any consequence thereof. 3. Performance Data. Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Seller's Warranty and Limitations of Liability. 4. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Good may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Seller's representative at any time to confirm actual specifications of purchased Good. 5. Errors and Omissions. The information in this catalog has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. Photoelectric Sensor with Built-in Amplifier E3Z 21 Complete "terms and conditions of sale" for product purchase and use are on Omron's website at www.omron.com/oei -- under the "About Us" tab in the Legal Matters section. NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. R OMRON ELECTRONICS LLC One East Commerce Drive Schaumburg, IL 60173 847-843--7900 OMRON CANADA, INC. OMRON ON--LINE 416-286-6465 Global -- http://www.omron.com USA -- http://www.omron.com/oei Canada -- http://www.omron.com.ca 885 Milner Avenue Toronto, Ontario M1B 5V8 For US technical support or other inquiries: 800-556--6766 Cat. No. E308--E3--3 22 10/04 Specifications subject to change without notice. Photoelectric Sensor with Built-in Amplifier E3Z Printed in U.S.A.