LTC1/836561JTP - Kamaya, Inc.

50 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】

•Part Number Description

Example

KAMAYA OHM

LTC

•Dimensions

LINEAR POSITIVE T-C CHIP THERMISTORS; RECTANGULAR TYPE

•Termal Characteristics

Temperature Characteristics and Linearity

Ambient Temperature(°C)

−40

−30

−20

−10

1006040250−20−40 75

∆R/R(%)

Unit : mm

*Values for reference

1.550.103.10.1 0.60.1 0.450.20LTC1/8

LTC1/10 2.00.15 0.60.1 0.4 0.2 2012

3216

0.2

0.1

Style WLMetric

0805

1206

Inch Hc

5mg

9mg

*Unit weight/pc.

0.3

0.2

0.1

0.3

0.10

0.05

1.25

4,500X10-6/°C

3,000X10-6/°C

1,000X10-6/°C

J102

LTC 1/8

Product Type

Style

•Features

1. Linearity of resistance change in wide temperature range.

2. Suitable for temperature compensation, temperature sensing and

controling, and circuit protection applications.

3. Please contact KAMAYA for Halogen free product of LTC series.

4. Stability Class : 5%

Rated resistance and T.C.R. value are marked with 4-digit on the over coating.

e.g. 10E3...

Please contact KAMAYA Sales department for further information.

10 : 1,000×10-6/°C

E3 : 1.5k ohm

Rated Dissipation & Size

Code

1/10 0.1W 2012

32161/8 0.125W

Rated Dissipation

Metric

0805

1206

Inch

Temperature Coefficient of Resistance

Refer to Ratings Table on next page

e.g.: 30=3,000×10-6/°C

Rated Resistance

E24 Series

e.g.:102=1k ohm

Tolerance on Rated Resistance

J5%

* Packaging & Standard Qty. (Min.)

Bulk (Loose Package)

Paper Tape

1,000pcs.

5,000pcs.TP

*Refer to Tape and Packaging information on pages 56 and 57.

Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】

KAMAYA OHM

LINEAR POSITIVE T-C CHIP THERMISTORS; RECTANGULAR TYPE

LTC

•Ratings

500 05

Temperature Coefficient of Resistance

10-6/°C

Code

LTC1/10

(0.1W)

LTC1/8

(0.125W)

±100×10-6/°C

Tolerance on

Rated Resistance

Preferred Number

Series for

Resistors

J(±5%)

Resistance Temperature

Coefficient Tolerance

100 ohm∼5.1k ohm 100 ohm∼10k ohm

800 08 ±150×10-6/°C

100 ohm∼5.1k ohm 100 ohm∼10k ohm

1,000 10 ±15%

100 ohm∼5.1k ohm 100 ohm∼10k ohm

1,500 15

100 ohm∼3.3k ohm 100 ohm∼4.7k ohm

2,000 20

±10%

100 ohm∼3.3k ohm 100 ohm∼4.7k ohm

2,400 24

100 ohm∼1.6k ohm 100 ohm∼2.2k ohm

2,800 28

100 ohm∼3.3k ohm 100 ohm∼3.6k ohm

3,000 30

100 ohm∼3.3k ohm 100 ohm∼3.6k ohm

3,300 33

100 ohm∼3.3k ohm 100 ohm∼3.6k ohm

3,600 36

51 ohm∼910 ohm 1.2k ohm

3,900 39

51 ohm∼560 ohm 51 ohm∼

51 ohm∼

910 ohm

4,200 42

33 ohm∼360 ohm 33 ohm∼470 ohm

4,500 45

33 ohm∼200 ohm 33 ohm∼180 ohm

Rated Resistance Range

(Rated Dissipation at 70°C)

E24

Isolation

Voltage

Category Temperature

Range

°C

100

−40∼+125

Ambient Temperature(°C)

100

−40 125

Note1. Rated Voltage = (Rated Disspation)×(Rated Resistance). (d.c. or a.c. r.m.s. Voltage)

Note2. Listed above will be made by order. Please contact KAMAYA for further information.

•Derating Curve

The derated values of dissipation for temperatures in excess of

70°C shall be indicated by the following Curve.

•Climatic Category

40/125/56

Lower Category Temperature −40°C

Upper Category Temperature +125°C

Duration of the Damp heat, Steady-State Test

56 days

Percentage of the rated dissipation(%)

Area of recommended operation

•Performance Characteristics JIS C 5201-1 : 1998

Description Requirements Test Methods

Clause 4.7

Clause 4.13

Clause 4.23

Clause 4.25.1

Clause 4.17

Clause 4.18

Clause 4.19

Clause 4.25.3

Clause 4.32

Clause 4.33

100Va.c.,60s

The applied voltage shall be 2.5 times severe, 2s.

Rated voltage, 1.5h"ON", 0.5h"OFF",

70°C, 1,000h.

Measuring temperature : +25°C/+75°C

235°C, 2s

After immersion into the flux, the immersion into solder

shall be carried out in Solder bath at 260°C for 5s.

5 cycles between −40°C and +85°C.

125°C, no-load, 1,000h.

5N, 10s

Amount of bend : 3 mm

Bend strength of the

face plating

Voltage proof

Overload

Climatic sequence

Endurance at 70°C

Variation of resistance

with temperature

Solderability

Resistance to soldering

heat

Rapid change of

temperature

Damp test, steady state

Endurance at the upper

category temperature

Adhesion

No breakdown or flashover

R≥1G ohm

∆R≤±(1%+0.05 ohm)

No visible damage, legible marking

∆R≤±(5%+0.1 omh) No visible damage

See Ratings Table

In accordance with Clause 4.17.4.5

∆R≤±(1%+0.05 omh)

∆R≤±(1%+0.05 omh) No visible damage

∆R≤±(5%+0.1 omh)

No visible damage, legible marking

∆R≤±(5%+0.1 omh) No visible damage

No visible damage

∆R≤±(1%+0.05 omh)

Dry/Damp heat(12

12h cycle), first cycle./

Cold/Damp heat(12

12h cycle), remaining

cycle./ D.C.Load.

Clause 4.24

40°C, 95%R.H., 56 days, test a) of Clause 4. 24. 2. 1