150/280 MIXED GT Series L E A ED S S S E AL E Sealed System Application Information GT 150 SERIES TERMINALS-Tin Plated 60 0.80 1.0 40 20 0 0 5 10 15 20 100 O 1.0 0.80 15 0.50 10 5 0 25 50 75 100 125 ....... 0.35-1.0 ........ 0-15 TEMP RANGE C: .......... -40 to 125 RESISTANCE: ...... <10m@20mV 80 0.80 60 2.0 1.0 3.0 40 5.0 20 0 0 O AMBIENT TEMPERATURE ( C ) CURRENT (AMPS) TEMPERATURE DERATING CURVES* 0.50 10 20 30 40 50 MAXIMUM CURRENT (AMPS) 0.50 20 TEMPERATURE RISE ( C) 100 80 280 SERIES TERMINALS - Tin Plated TEMPERATURE RISE ABOVE AMBIENT (25 oC) VS CURRENT* TEMPERATURE DERATING CURVES* MAXIMUM CURRENT (AMPS) TEMPERATURE RISE (OC) TEMPERATURE RISE ABOVE o AMBIENT (25 C ) VS CURRENT* 50 5.0 40 3.0 2.0 1.0 30 0.80 0.50 20 10 0 25 50 75 100 125 AMBIENT TEMPERATURE (OC) CURRENT (AMPS) CABLE RANGE (mm2): VOLTAGE DROP: CABLE RANGE (mm2): VOLTAGE DROP: CURRENT RANGE (AMPS): CENTERLINE SPACING (mm): ....... CURRENT RANGE (AMPS): CENTERLINE SPACING (mm): ....... O .... <10.0mV/amp 4.5 BLADE WIDTH (mm): ................. 1.5 ....... 0.35-5.0 ........ 0-25 TEMP RANGE C: .......... -40 to 125 RESISTANCE: ...... <10m@20mV O ...... <4.0mV/amp 6.5 BLADE WIDTH (mm): ................. 2.8 * The test data are based on single circuits in free space and were generated using a "Lumped Resistance" model. This model does not account for all of the variables that would be present in an actual application. For actual product performance, contact your regional support representative at the number listed below. Cable Seals 150 280 GT 150 MALE TERMINALS SEALED Male Terminals Part # 15326268 15326269 Primary Lock Reinforcement (PLR) Cable Range (mm2) 0.50-0.35 1.00-0.75 Material Tin Brass Tin Brass Plating Tin Tin GT 280 MALE TERMINALS SEALED Part # 15304730 15304731 15304732 Cable Range (mm2) 0.50-0.35 1.00-0.75 3.00-1.50 Material Tin Brass Tin Brass Tin Brass Plating Tin Tin Tin Male Connector Assembly GT 150 CAVITY PLUG* Part # Cavity Diameter Material 15305171 4.0mm Silicone *Cavity plugs seal unused female and male cavities. GT 280 CAVITY PLUG* GT MIXED MALE CONNECTOR ASSEMBLIES SEALED # Cavities Connector Color Material 12 15336034 Black PA6 10% GF & 20% GB 14 15422562 Black PA6 10% GF & 20% GB 16 15326085 Black PA6 10% GF & 20% GB Primary Lock Reinforcement (PLR) is included in the Connector Assemblies listed in this section. Color Green Part # Cavity Diameter Material Color 15305170 5.8mm Silicone *Cavity plugs seal unused female and male cavities. White SECTION NOTES: Contact your regional support representative at the number listed below. * Due to rigid tolerances of connector cavities, it is critical to meet all crimp dimensions as specified. http://delphi.com/products/connect North American Region 1-800-PACKARD European Region 49-202-291-2000 Asia Pacific Region 65-730-9900 South American Region 55-12-378-2002 37 D