C3D02060F VRRM Silicon Carbide Schottky Diode 600 V IF (TC=128C) = 2 A Z-RecTM Rectifier (Full-Pak) Qc Features * * * * * * * * * = = 4.8 nC Package 600-Volt Schottky Rectifier Optimized for PFC Boost Diode Application Zero Reverse Recovery Current Zero Forward Recovery Voltage High-Frequency Operation Temperature-Independent Switching Behavior Extremely Fast Switching Positive Temperature Coefficient on VF Fully Isolated Case TO-220-F2 Benefits * * * * * PIN 1 Replace Bipolar with Unipolar Rectifiers Essentially No Switching Losses Higher Efficiency Reduction of Heat Sink Requirements No Additional Isolation Required Applications * * * CASE PIN 2 Part Number Package Marking C3D02060F TO-220-F2 C3D02060 Switch Mode Power Supplies Power Factor Correction - Typical PFC Pout : 150W-300W Motor Drives Maximum Ratings (TC = 25 C unless otherwise specified) Symbol Parameter Unit Test Conditions VRRM Repetitive Peak Reverse Voltage 600 V VRSM Surge Peak Reverse Voltage 600 V VDC DC Blocking Voltage 600 V Continuous Forward Current 4 2 1.8 A TC=25C TC=128C TC=135C IFRM Repetitive Peak Forward Surge Current 12 8 A TC=25C, tP = 10 ms, Half Sine Wave, D=0.3 TC=110C, tP = 10 ms, Half Sine Wave, D=0.3 IFSM Non-Repetitive Peak Forward Surge Current 20 16 A TC=25C, tP = 10 ms, Half Sine Wave, D=0.3 TC=110C, tp = 10 mS, Half Sine Wave, D=0.3 IFSM Non-Repetitive Peak Forward Surge Current 65 A TC=25C, tP = 10 s, Pulse Ptot Power Dissipation 10.8 4.7 W TC=25C TC=110C -55 to +175 C 1 8.8 Nm lbf-in IF TJ , Tstg Operating Junction and Storage Temperature TO-220 Mounting Torque 1 Value C3D02060F Rev. D M3 Screw 6-32 Screw Note Electrical Characteristics Symbol Parameter Typ. Max. Unit Test Conditions Note VF Forward Voltage 1.5 1.8 1.7 2.4 V IF = 2 A TJ=25C IF = 2 A TJ=175C IR Reverse Current 10 20 50 100 A VR = 600 V TJ=25C VR = 600 V TJ=175C QC Total Capacitive Charge 4.8 nC VR = 600 V, IF = 2A di/dt = 500 A/s TJ = 25C C Total Capacitance 120 12 11 pF VR = 0 V, TJ = 25C, f = 1 MHz VR = 200 V, TJ = 25C, f = 1 MHz VR = 400 V, TJ = 25C, f = 1 MHz Note: 1. This is a majority carrier diode, so there is no reverse recovery charge. Thermal Characteristics Symbol RJC Parameter Typ. Unit Thermal Resistance from Junction to Case 13.8 C/W Typical Performance 4.0 4.0 66 IF Forward Current (A) IF Forward Current (A) 3.0 3.0 25C 75C 125C 175C 55 2.5 2.5 D1_25C D1_75C 2.0 2.0 D1_125C D1_175C 1.5 1.5 1.0 1.0 IR Reverse Current (uA) TJ = TJ = TJ = TJ = IR Reverse Current (A) 3.5 3.5 44 Current(A) D2_75C 33 D2_125C D2_175C 22 TJ = 25C TJ = 75C TJ = 125C 11 TJ = 175C 0.5 0.5 0.0 0 0.0 0.0 00 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 V Forward Voltage (V) F VF Forward Voltage (V) Figure 1. Forward Characteristics 2 C3D02060F Rev. D 3.0 3.0 0 0 100 100 200 200 300 300 400 400 500 500 600 600 700 700 (V) (V) R Reverse Voltage VR VReverse Voltage Figure 2. Reverse Characteristics 800 800 900 900 Typical Performance C3D02060F Current Derating D3_2A_FP 10 10 60 60 50 50 88 20% 30% 50% 70% DC 66 55 Duty* Duty* Duty* Duty* C Capacitance (pF) 77 44 C Capacitance (pF) F(PEAK) (A)(A) Forward Current Peak I Peak Forward Current IF(PEAK) 99 40 40 30 30 D3_2A_FP 20 20 33 22 10 10 11 00 25 25 50 50 75 75 100 100 125 125 TCC Case Case Temperature Temperature ((C)C) T 150 150 00 175 175 1 1 10 10 100 100 1000 1000 VR Reverse VR Reverse Voltage(V) (V) Voltage * Frequency > 1KHz Figure 3. Current Derating Figure 4. Capacitance vs. Reverse Voltage 1E1 Zth (C/W) 1E0 E-1 E-2 1E-5 1E-4 1E-3 1E-2 1E-1 1E0 Time (s) Figure 5. Transient Thermal Impedance 3 C3D02060F Rev. D 1E1 1E2 1E3 Typical Performance 15 15.0 Power Dissipation (W) Power Dissipation (W) 12 12.0 9 9.0 6 6.0 3 3.0 0 0.0 25 25 50 50 75 75 100 100 125 125 150 150 175 175 Case Temperature((C) TC CaseTcTemperature C) Figure 6. Power Derating Package Dimensions Package TO-220-F2 E A F POS B G C H P L S D T M N PIN 1 PIN 2 4 C3D02060F Rev. D CASE Inches Millimeters Min Max Min A .177 .193 4.5 Max 4.9 B .092 .108 2.34 2.74 6.9 C .248 .272 6.3 D .098 .114 2.5 2.9 E .390 .406 9.9 10.3 3.4 F .118 .134 3.0 G .122 .137 3.1 3.5 H .617 .633 15.67 16.07 L .039 .055 1.0 1.4 M .016 .031 0.4 0.8 N .185 .217 4.7 5.5 P 0 .154 0 3.9 S .476 .508 12.1 12.9 T .016 .031 0.4 0.8 NOTE: 1. Dimension L, M, T apply for Solder Dip Finish Recommended Solder Pad Layout TO-220-F2 Part Number Package Marking C3D02060F TO-220-F2 C3D02060 Note: Recommended soldering profiles can be found in the applications note here: http://www.cree.com/power_app_notes/soldering Diode Model VfT = VT + If * RT RT = 0.21 + (T j *1.71*10 -3 ) VT = 0.98 + (T j * -1.7 *10 -3 ) Note: Tj = Diode Junction Temperature In Degrees Celsius 5 C3D02060F Rev. D Notes * RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. * REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. * This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, air traffic control systems, or weapons systems. Copyright (c) 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. 6 C3D02060F Rev. D Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cree, Inc.: C3D02060F