38
SSL - Discrete Wire IDC
Series 9175
The 917X series of surface mount Insulation Displacement Connectors (IDC)
were developed to meet the harsh automotive and industrial market
applications for connecting individual wires directly to a PCB ranging from 14
AWG to 28 AWG. This industry proven contact system has been tested to
automotive levels of shock, vibration, and temperature cycling to prove their
reliability and robustness. The simplicity of inserting a wire into the connector
with a small tool allows a wide range of devices to be connected to the PCB
without soldering. In SSL applications specifically, these connectors are used to
bring power and signal onto the PCB or are used to daisy chain multiple boards
together in a long string. While the IDC contact provides a gas-tight connection
to conductor of the wire, the housing has been designed to grab the insulation
of the wire to provide a positive strain relief even in the harshest conditions. In
case of repair, the wires can be removed and replace up to three times.
The 9175 series accepts 26 AWG to 28 AWG wires with an insulation diameter
ranging from 0.7mm to 1.0mm. These single contact connectors support a 1
amp current rating and have a split SMT tail design to provide maximum
stability on the PCB. Available in a 2p and 3p configuration, these connectors
can be end stackable for higher pin counts.
ELECTRICAL
• Current Rating: 1 Amp / Contact
• Voltage Rating: 125 VAC
9175
Series
00
Prefix
00X
Number of Ways
06
Plating
Option
06 = Pure Tin
all over
HOW TO ORDER
X
Insulator Color
001
Wire Gauge Size
Code Color Application
0 Black Industrial
1 White Lighting
ENVIRONMENTAL
• Operating Temperature:
-40ºC to +125ºC
MECHANICAL
• Insulator Material: Nylon 46: UL94V0
• Contact Material: Phosphor Bronze
• Plating: Tin over Nickel
• Durability: 3 Cycles
FEATURES AND BENEFITS
• IDC contact provides a gas-tight connection to the PCB for long term reliability
• Connector housing captures the wire insulation for positive strain relief
• Tested to automotive levels on shock, vibration and temperature cycling for reliability
• Low and high volume assembly tools to match production volumes
• Reduced total applied cost versus solder or crimp processes
• High temperature insulator capable to 260 degrees C reflow soldering processes
APPLICATIONS
• Connecting discrete wire components
directly to the PCB
• Bringing power and signals onto a PCB
• Daisy chaining PCB’s together to create
a continuous string of boards
• Application Notes: refer to 201-01-124
Code No of Details
Ways
002 2 Page 39
003 3 Page 40
Code Accepted Wire
Wire Gauge Insulation
001 28 Gauge Solid or Stranded Min Ø 0.70
26 Gauge Solid or Stranded Max Ø 1.00
Certification: UL File #E320991
39
SSL - Discrete Wire IDC
Series 9175
26-28 AWG 2 WAY IDC CONNECTOR
NOTES:
1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.
2. CONTACT MATERIAL: PHOSPHORE BRONZE.
INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.
COLOR REFER TO PAGE 38.
3. CONNECTOR DESIGNED TO ACCEPT 26 AND 28 GAUGE SOLID OR
STRANDED WIRE.
4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.
5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-100.
SMT PCB LAYOUT
PURE TIN PADS
PACKING DETAILS
REEL QTY 2000
LEADER 500MM
TRAILER 500MM
REEL / BOX 7
PACK QTY 14000
40
SSL - Discrete Wire IDC
Series 9175
26-28 AWG 3 WAY IDC CONNECTOR
NOTES:
1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.
2. CONTACT MATERIAL: PHOSPHORE BRONZE.
INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.
COLOR REFER TO PAGE 38.
3. CONNECTOR DESIGNED TO ACCEPT 26 AND 28 GAUGE SOLID OR
STRANDED WIRE.
4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.
5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-100.
SMT PCB LAYOUT
PURE TIN PADS
PACKING DETAILS
REEL QTY 2000
LEADER 500MM
TRAILER 500MM
REEL / BOX 7
PACK QTY 14000
41
SSL - Discrete Wire IDC
Series 9175
HAND INSERTION TOOLING
SINGLE WIRE INSERTION TOOL FOR 26/28 GAUGE WIRE
CLEARANCE AREA ON PCB FOR HAND TOOLING
HIGH PRODUCTION
Metal
ALL METAL
Max Tool
Insulation Part Number
Dia
1.00 06 9175 7017 01 000
MED PRODUCTION
Metal/Plastic
METAL SHANK
PLASTIC
Max Tool
Insulation Part Number
Dia
1.00 06 9175 7016 01 000
LOW PRODUCTION
Plastic
A
LL PLASTIC
Max Tool
Insulation Part Number
Dia
1.00 06 9175 7004 01 000
UNIVERSAL HANDLE
Details Tool
Part Number
6.35 A/F HEX 06 7000 7730 01 000
BIT HOLDER
2 WAY 3 WAY
42
SSL - Discrete Wire IDC
Series 9175
INSERTION TOOLING
REQUIRES HAND PRESS WITH FLAT ROCK PLATES
2 WAY TOOL
TOOL NUMBER 06-9175-7017-01-002
SKETCH SHOWS PCB RESTRICTED AREAS FOR ASSEMBLY TOOLING
3 WAY TOOL
TOOL NUMBER 06-9175-7017-01-003
SKETCH SHOWS PCB RESTRICTED AREAS FOR ASSEMBLY TOOLING
NOTES:
1. DIMENSIONS SHOWN ARE
REFERENCE DIMENSIONS.
2. MAXIMUM COMPONENT
HEIGHT 0.80MM IN THIS AREA.
3. MAXIMUM COMPONENT
HEIGHT 4.00MM IN THIS AREA.
4. THE SAME RESTRICTIONS
APPLY TO ALL WIRE
INSULATION DIAMETERS.
