LCD Module Technical Specification First Ecition Nov 6, 2007 Final Revision RIKI T-55308D084J-FW-A-AAN Type No. OPTREX CORPORATION Approved: = Shigeo Suzuki -QUALITY ASSURANCE DIV/Si|ON- Checked : Toshiyuki Okamoto -DESIGN 2T Prepared : Ryuya Abe DESIGN 2T APPROVED By Signature : Date : Please return this specification within two month with your signature. If not returned within two month ,specification will be considered as having been accepted. T-55308D084J-FW-A-AAN (AA) OPTREX CORPORATION Page 1/39CONTENTS Item Page CONTENTS Nw APPLICATION OVERVIEW co ABSOLUTE MAXIMUM RATINGS oul] Se | Ww ELECTRICAL CHARACTERISTICS or INTERFACE PIN CONNECTION INTERFACE TIMING 10 BLOCK DIAGRAM 15 MECHANICAL SPECIFICATION 16 Ol})mi in] _ Dm] oy & OPTICAL CHARACTERISTICS 18 RELIABILITY TEST CONDITION 21 11 INSPECTION STANDARDS 22 12 OTHER FEATURE 13 HANDLING PRECAUTIONS FOR TFT-LCD MODULE 24 PACKAGING SPECIFICATION 27 PRODUCTS NUMBER LABELING FORMS 31 LAMP UNIT for 8.4 SVGA 33 T-55308D084J-FW-A-AAN (AA) OPTREX CORPORATION Page 2/391. APPLICATION This specification applies to color TFT-LCD module, T-55308D084J-FW-A-AAN. These specification papers are the proprietary product of OPTREX and include materials protected under copyright of OPTREX. No part of this document may be reproduced in any form or by any means without the express written permission of OPTREX. OPTREX does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a product specified in this document. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of OPTREX or of others. OPTREX classifies the usage of the TFT-LCD module as follows. Please confirm the usage before using the product. (1) Standard Usage Computers, office equipment, factory automation equipment, test and measurement equipment, communications, transportation equipment(automobiles, ships, trains, ete.), provided, however, that operation is not influenced by TFT-LCD directly. (2) Special Usage Medical equipment, safety equipment, transportation cquipment, provided, however, that TFT-LCD is necessary to its operation. (3) Specific Usage Cockpit Equipment, military systems, aerospace equipment, nuclear reactor control systems, life support systems and any other equipment. OPTREX should make a contract that stipulate apportionment of responsibilities between OPTREX and our customer. The product specified in this document is designed for Standard Usage unless otherwise specified in this document. If customers intend to use the product for applications other than those specified for Standard Usage, hey should first contact OPTREX sales representative for it's intended use in writing. OPTREX has been making continuous effort to improve the reliability of its products. Customers should implement sufficient reliability design of their application equipments such as redundant system design, fail-safe functions, anti-failure features. OPTREX assumes no responsibility for any damage resulting from the use of the product that does not comply with the instructions and the precautions specified in this document. Please contact and consult a OPTREX sales representative for any questions regarding this product. T-55308D084J-FW-A-AAN (AA) OPTREX CORPORATION Page 3/392. OVERVIEW T-55808D084J-FW-A-AAN is 8.4 color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module composed of LCD panel, driver ICs, control circuit, and backlight unit. By applying 6 bit or 8 bit digital data, 800 x 600, 262k-color or 16.7M-color images are displayed on the 8.4 diagonal screen. Input power voltage is 3.3 V for LCD driving. The type of data and control signals are digital and transmitted via LVDS interface per Typ. 40 MHz clock cycle. Inverter for backlight is not included in this module. General specifications are summarized in the following table: ITEM SPECIFICATION Display Area (mm) 170.4 x 127.8 (8.4-inch diagonal) Number of Dots 800 x 3 CH) x 600 (V) Pixel Pitch Gum) 0.213 (H) x 0.213 (V) Color Pixel Arrangement RGB vertical stripe Display Mode Normally white TN Number of Color 262k(6 bit/color), 16.7M(8 bit/color) Luminance (cd/m2) 400 Wide Viewing Angle Technology Optical Compensation Film Viewing Angle (CR 0010) -80~80 (H) -60~80 (V) Surface Treatment. Anti-glare and hard-coating 3II Electrical Interface LVDS 6 bit/8 bit) Optimum Viewing Angle (Contrast ratio) 6 o'clock Module Size (nm) 199.5 (W) x 149.0 (H) x 11.5 WD) Module Mass (g) 380 Backlight Unit CCFL, 2-tubes, edge-light, replaceable Characteristic value without any note is typical value. T-55308D084J-FW-A-AAN (AA) OPTREX CORPORATION Page 4/393. ABSOLUTE MAXIMUM RATINGS ITEM SYMBOL MIN. MAX. UNIT Power Supply Voltage for LCD VCC 0 4.0 Vv Logic Input Voltage VI -0.8 VCC+0.3 Vv Lamp Voltage VL 0 2000 Vrms Lamp Current IL 0 10 mArms Lamp Frequency FL 100 kHz Operation Temperature (Panel) Note 1,2) Top(PaneD 20 70 C Operation Temperature (Ambient) Note Top(Ambient) -20 70 C Storage Temperature Note 2) Tstg 20 80 C [Note] 1) Measured at the center of active area and at the center of panel back surface 2) Top, Tstg < 40C : 90%RH max. without condensation Top,Tstg > 40C : Absolute humidity shall be less than the value of 90%RITI at 40C without. condensation. 4. ELECTRICAL CHARACTERISTICS @) TFT- LCD Ambient Temperature : Ta = 25C ITEM SYMBOL] MIN. | TYP. MAX. UNIT Remarks Power Supply Voltage for LCD VCC 3.0 3.8 3.6 V *1) Power Supply Current for LCD ICC 350 540 mA *2) Permissive Input Ripple Voltage VRP 100 mVp-p | VCC =4+3.3 V High VIH 2.0 VCC+0.3 Vv MODE, SC Logic Input Voltage Low VIL 0 0.8 Vv MODE, SC *1) Power and signals sequence: t1<10ms 200 ms < (4 0<t2<50ms 200 ms < t6 0<t38<50ms 0<t6 VCC o.gvec_} 1 0.9VCC LCD Power Supply / Logic Signal / 0.1VvcC oavee/ | tt} t2 | bit ta | a! hg tet ' ' VL roy Backlight Power Supply \ ee ae on te data: RGB DATA, DCLK, DENA, MODE, SC T-55308D084J-FW-A-AAN (AA) OPTREX CORPORATION Page 5/39VCC -dip conditions: 1) When 2.6 Vs VCC <3.0V, tds 10ms 2) When VCC < 2.6 V VCC-dip conditions should also follow the power and signals sequence. vec -------------- 4 --L *2) Typical current condition: 64-gray-bar pattern(6 bit) 256-eray-bar pattern(8 bit) 600 line mode VCC = 43.3 V , f4=37.9 kHz, fv=60 Hz, fotk= 40 MHz (2) Backlight Ta =25C ITEM SYMBOL| MIN. TYP. MAX. UNIT Remarks Lamp Voltage VL 7 400 a Vrms IL =6.5 mArms Lamp Current IL 3.0 6.5 7.5 mArms *1),*5) Lamp Frequency FL 30 70 kHz *9) 850 - Vrms Ta = 25C Starting Lamp Voltage VS 1190 - - Vrms Ta =0C 1360 7 a Vrms Ta = 020C Lamp Life Time LT | 50,000 -- - h Cota mam *1) Lamp Current measurement method (The current meter is inserted in low voltage line.) CTL A CTH LCD | | Power Module Inverter [|__| Supply CTL CTH *2) Lamp frequency of inverter may produce interference with horizontal synchronous frequency, and this may cause horizontal beat on the display. Therefore, please adjust lamp frequency, and keep inverter as far from module as possible or use electronic shielding between inverter and module to avoid the interference. *3) Lamp life time is defined as the time either when the brightness becomes 50% of the initial value, or when the starting lamp voltage does not meet the value specified in this table. *4) The life time of the backlight depends on the ambient temperature. The life time will decrease under low/high temperature. T-55308D084J-FW-A-AAN (AA) OPTREX CORPORATION Page 6/39*5) Please use the inverter which has symmetrical current wave form as follows, The degree of unbalance: less than 10% The ratio of wave height: less than ./2+10% Ip LZ Vv A ws In Vv CURRENT WAVE FORM Ipy' High side peak The degree of unbalance = | Ip, Ip,| /Irms x 100(%) The ratio of wave height = Ip,,(or Ip,) /Irms lp Low side peak T-55308D084J-FW-A-AAN (AA) OPTREX CORPORATION Page 7/395. INTERFACE PIN CONNECTION (1) CN 1(nterface Signal) Used connector: 20186-020E-11F(-PEX) [FI-SEB20P-HFE (JAE) equivalent] Corresponding connector: 20197-020U-FU-PEX), FI-S20S (JAE) [for discrete Wire] FI-SE20ME (JAE) [for FPC] Pin Function(ISP 6 bit compatibility mode) Function(ISP 8 bit No. Symbol 6 bit input | 8 bit input compatibility mode) 1 VCC +3.3 V Power supply < 2 VCC +3.3 V Power supply & 3 GND GND < 4 GND GND < 5 |Link OO] RO, R1, R2, R38, R4, R5, GO | R2, R38, R4, R5, R6, R7, G2 | RO, R1, R2, R38, R4, R5, GO 6 | Link 0+] RO, R1, R2, R38, R4, R5, GO | R2, R83, R4, R5, RG, R7, G2 | RO, Ri, R2, R38, R4, R5, GO 7 GND GND < 8 |Link 1M] G1, G2, G3, G4, G5, BO, B1 | G8, G4, G5, G6, G7, B2, B38 | G1, G2, G3, G4, G5, BO, B1 9 |Link 1+] G1, G2, G3, G4, G5, BO, B1_ | G3, G4, G5, G6, G7, B2, B3 | G1, G2, G8, G4, G5, BO, B1 10 GND GND < 11 |Link 20] B2, B3, B4, B5, DENA B4, B5, B6, B7, DENA B2, B3, B4, B5, DENA 12 | Link 2+| B2, B38, B4, B5, DENA B4, B5, B6, B7, DENA BY, B3, B4, B5, DENA 13 GND GND < CLKIN Clock 14 0 < 15 |CLKIN+ Clock + < 16 GND GND < 17 | Link30 | See: *2) RO, R1, GO, G1, BO, B1 R6, R7, G6, G7, B6, B7 18 | Link3+ | See: *2) RO, R1, GO, G1, BO, B1 R6, R7, G6. G7, B6, B7 19 | MODE Low=ISP 6 bit compatibility mode Sliteompa tibility mode 20 SC Reverse scan control (Low : Normal , High : Reverse) |< *1) The shielding case is connected with GND. *2) Recommended wiring of Pin 17,18 (6 bit input) 9 VCC feanemitier a 680 Q LOW data Pin 17 Pin 17 Pin 18 or Pin 18 620 Q (2) CN 2, 3(Backlight) Backlight-side connector: BHR-02(8.0)VS-1N (JST) Inverter-side connector: SM02(8.0)B-BHS(LF)(SN) GST) Pin No. Symbol Function 1 CTH VBLH (High voltage) 2 CTL VBLL (Low voltage) [Note] VBLH - VBLL = VL T-55308D084J-FW-A-AAN (AA) OPTREX CORPORATION Page 8/39(3) ISP data mapping ipatibility mode(6 bit input) a. ISP 6 bit cor CLKIN+/- Xx YaYuyu yuyu yr yr y X DOMRMmARARAAMmaH ORM ARAMA MMAR Link0+/- Link1+/- Link2+/- b. ISP 6 bit compatibility mode(8 bit input) CLKIN+/- QAM AAA DOPMaMRMAMAAEY DORAN AMACEX POAOMAWIRMMMRAIMATMEAE Link0+/- Link1+/- Link2+/- Link3+/- c. ISP 8 bit compatibility mode CLKIN+/- Yam oe Ke Ke Oy X Xx X si X po X as X cs X as K a2 K ai X X X Xx X pena X Xx XB X BA XB X Bz X X XX XX Link1+/- Link2+/- TX NE XE EX Page 9/39 OPTREX CORPORATION Link3+/- (AA) T-55308D084J-FW-A-AAN6. INTERFACE TIMING LVDS transmitter input signal (1) Timing Specifications ITEM SYMBOL| MIN TYP MAX UNIT . Frequency fotK 35 40 42 MHz DCLK Period tcLK 23.8 25 28.6 ns Active Time tHa 800 800 800 tcLK Blanking Time tHB 20 256 - tcoLK Ilorizontal Frequency fu 35,2 37.9 39.2 kHz Period tH 25.5 26.4 28.4 Os DENA Active Time twa 600 600 600 tH Blanking Time vB 3 28 tH Vertical Frequency fy 5d 60 64.2 Hz Period tv 15.6 16.7 18.2 ms [Note] 1) DENA ata Enable) should always be positive polarity as shown in the timing specification. 2) DCLK should appear during all invalid period. 3) LVDS timing follows the timing specifications of LVDS receiver IC: THC63IVDF84B(Thine). 4) In case of blanking time fluctuation, please satisfy following condition. tvBn > tvBn-1 3(tiD T-55308D084J-FW-A-AAN (AA) OPTREX CORPORATION Page 10/39(2) Timing Chart a. Horizontal Timing Chart First Data tHB tia Vv \\ DENA Ww UU |_~ Last Data DATA Invalid Data 1 2 \ 3 Y Y 8 ( ee | (R,G,B) Invalid Data \ tH=1/fa Vv. b. Vertical Timing Chart. LINE DATA tvs A Invalid Data tva A DENA | tv=l/fr a T-55308D084J-FW-A-AAN (AA) OPTREX CORPORATION Page 11/39@) Color Data Assignment a.6 bit input. INPUT DATA a R DATA G DATA B DATA COLOR RS RA PR3 R2TRT RO|GS Ga? G3 G2 G17 Go] BS Ba. B83 BZ BT BO MSB LSB |MSB LSB |MSB LSB BLACK 0-0'0,0,0,0/0:0,0,0:0:0]/0:0:0:0:0 0 RED@3) 1 1:51-51:1:51/0,0:0:0. 0:0]/0,.0,0:0:0.0 GREEN63)} 020/50 0:0:0/151:1:1,-1:51/0:50:0:0:0.0 BASIC IBLUEG3) |0,50:50,0:50,0/0:0:'0,0-0:0]1:1:1:1:51 1 COLOR |CYAN 0:0:0:0:0:;0]}/1:1:1:1- 12:1]/1221:51:51:1 061 MAGENTA] 1/1:1,5151:1/0:50'0:0,0;0]1:;1:51:5151/1 YELLOW |1.51:1.61:51-1/1:1:51-51:51:51/0:0:0:0:0 0 WHITE Pedlid didir}di rider viirtiiidiriirvii i REDQ) 0-0:0,0,0-1/0:50:0.0:0:;0]/0:0:0:0:0 0 REDQ) 0-0:0,0:51,0/0:0:0,0:0:0]0:0:0:0:0 0 RED RED(G2) 1 1,151:1:50/0,0:0:50 0:0/0,0,0:0:0.0 RED@3) 1 1:1-1:1:51/0,0:0:0 0:0/0.0,0:0:0.0 GREEN() |0:0:0.0:0:0/0:5;0:0:0,0:51/0:0:0:0:0.0 GREEN@2) 10:20:50. 0:0:0/0:;0:50:0,-1,0/0:0:0,0:0.0 GREEN GREENG62)}0:0,0 0:0:0/1:51:1:1,1,0/0:50:0,0:0.0 GREEN63)}0:0:50 0:0:0]/1;1:21:1,-151/0:50:50'50:0.0 BLUE) 0-0:0,0:,0,-0/0:0:0,0:0:0]/0:0:0:0:0 1 BLUEQ) 0-0:0,0:0,0/0:0:;0,0:0:;0]0:0:0:0:1 0 BLUE BLUEG) |0:0:0,0:50:0/0:0:0:0,0:;0]1:1:51:51:51.0 BLUFG3) |0:0:0:50:0:0/0:0:0:0 0:0]1:1:1:1:51:1 [Note] 1) Definition of gray scale Color (n) ---n indicates gray scale level. Higher n means brighter level. 2) Data 1:High, 0: Low T-55308D084J-FW-A-AAN (AA) OPTREX CORPORATION Page 12/39b. 8 bit input INPUT DATA R DATA G DATA B DATA RT R6IR5 R4iR3iR2:R1 Ro | G7 |G6iGS!G4iG3iGZiG1: Go | B7 /BeiBs B4iB3iBz MSB LSB/MSB LSB|MSB Oo Oo Oo Oo Oo GREEN(255) BASIC |BLUE@55) COLOR |cyan GENTA OW DiPM]ReikPiFPidiDdicqgirico DiPM]TRiPiPidiDdicirico CIDP RiPiPiDdiDdiciricoa Oictlyeike iP ididiadiria CIiOPRiPiPididiciricoa RPiOTRiPiPiDdidicdirico DID] RiRPiCOiRPiDdiRriodico OicdleiePidireidikPidia DIiD] RiP icPiPiDdi-rPiodio CSIiDTRPirPiciPiDdiriodico DID] RIiRP LC PRP IDiRPiDdico ODiPDlReikPidirFiDdik:iDic SiS YPRidiPiPiFPiaqiaqio SCiSO]TRicGirPiPirPiciadico SEODYPREVDIMPEPRIERPRICILOIO Cid RPiDiktime ip iadidiad SEOPTRIECDIPERPERICIOIO CDiOPRiGiPiPiPi@da:iaqico SEODOYPTRICI BPE ERERIOCOIOIO 1 0 0 0 1 1 1 0 0 Ciel eikPtiPicdiDdidi- SiG] RiPidirPiDdiriao SiG YPReirPiidirPiDdiriao CiPM@lyrei@diripeiiPiadia GREEN(1) GREEN() GREEN GREEN(255) BLUE(1) BLUE(Q) BLUE(255) 0 :0:0:0 [Note] 1) Definition of gray scale Color (m) ---n indicates gray scale level. Higher n means brighter level. 2) Data 1:High, 0: Low T-55308D084J-FW-A-AAN (AA) OPTREX CORPORATION Page 13/39(4) Display Position and Scan Direction D(X, Y) shows the data number of input signal for LCD panel signal processing PCB. SC: Low SC: High DG, = =- > D00,1) | D(800,600)<}_ D600) i Leo CN2 ee CN2 SS > << >> _ Dd,600) +D(800,600) ] 1(800,1) <=. 1,1) ] T-55308D084J-FW-A-AAN (AA) OPTREX CORPORATION Page 14/397. BLOCK DIAGRAM CN1 Timing signal Display data Timing > > Controller Power => I/F Connector Power Supply Circuit G1 /}__ p> c G2 s --> a 2 a G600 |___________ TFT-LCD at f_3t $2399 Drivers(source) CCFL T-55308D084J-FW-A-AAN (AA) OPTREX CORPORATION Page 15/398. MECHANICAL SPECIFICATIONS (1) Front Side TTI +5 110 fh) PENING?) (BEZEL oO no 174, =A) 170.4 CACTIVE AR EI CONTNAdO 14258) <EL C(VS9EV SATLOV) 8 421 /X LEW CENTER unless nated +O.5mm arojection $ ea ia 1) Tolerance 2)Tnird anle ( } Sy IP = It (Unit: mm) T-55308D084J-FW-A-AAN (AA) OPTREX CORPORATION Page 16/39(2) Rear Side d11o9oefocd a] eue pu CASPINE SACO "S520 -HHE Fe ZNO pei7cu ssajlur wwo'or Ss! aoueual (Xdd-[T)AlLlL-d00-9810e: LNO e' So, B2b1 7 MN Sol O}~ ol dae oe mo . MD (2 FP] (o'r) ale t Q1oo0:2 co cS [ 3 YW, VL AL, VL JE ee a ee a LOH? | Ol VSS SL LA LLL, Ww SILLA AA LAA Lz het ENO Cy, AAS : LL A AL ALS / A Ld / (|_| SLI ALLL ALS ISLS LLL Vig VILA LLL 4 | I LLLLLEL IE LL, ML LL. : : | LL, 4 . - - - 4 : ie NI Td) me K nM wo oO ol gl NY oo~ Ne coo os ul i G ae ~ 77ST ff Zi VILILLILL LEAL LA AL, p {|_| Wig iii, Z; Vy y Mii WY y Yip Li /) rt : VSS, MLL ho KLEE 4 {t> So - { KR Lt LSE La! h al Y : om & 4; E oO L Lif : Ole ee ee FOHEL Ol tin NY f{______ a | rn Co q100:2 i 7 st | tk zNa (247) (97F) N OS oo OEL (Unit:mm) Page 17/39 OPTREX CORPORATION (AA) T-55308D084J-FW-A-AAN9. OPTICAL CHARACTERISTICS Ta=26C, VCC=3.3V, Input Signals: Typ. Values shown in Section 6 ITEM SYMBOL | CONDITION | MIN TYP MAX | UNIT |Remarks Contrast Ratio CR By=0, OH=0 390 600 *1)*2)*5) Luminance Lw Ov=0, @u=0 320 400 cd/m2 | *1)*5) Luminance Uniformity ALw Ov=0, OH=0 30 % |*1)*3)*5) tr Ov=0, OH=0 4 ms |*1)*4)*5) Response Time tf Av=0, OH=0 12 ms |*1)*4)*5) Horizontal 6H -~70~70 | -80~80 *1)*5) , CR 210 Viewing Vertical Oy -50~70 | -60~80 *1)*5) Angle Horizontal 611 CRes -70~70 | -80~80 *1)*5) Vertical Oy 7 ~60~70 | 70~80 *1)*5) Image sticking tis 2h 2 s *6) Red Rx 0.540 | 0.570 | 0.600 Ry 0.313 | 0.343 | 0.373 Green Gx 0.275 | 0.305 | 0.335 Colon . Gy av0, Oxc0 0.508 | 0.538 | 0.568 + 1)#5) oordinates |Blue Bx 0.126 | 0.156 | 0.186 By 0.121 | 0.151 | 0.181 White Wx 0.283 | 0.313 | 0,343 Wy 0.299 | 0.329 | 0.359 [Note] These items are measured using CS1O00(MINOLTA) for color coordinates, EZContrast(ELDIM) for viewing angle, and CS1000 or BM-5A(TOPCON) for others under the dark room condition (no ambient light) after more than 30 minutes from turning on the lamp unless noted. Condition: IL = 6.5 mArms, FL=55kHz Measurement method for luminance and color coordinates is as follows. The luminance is measured according to FLAT PANEL DISPLAY MEASUREMENTS STANDARD (VESA Standard). T-55308D084J-FW-A-AAN (AA) OPTREX CORPORATION Page 18/39*1) Measurement Point Contrast Ratio, Luminance, Response Time, Viewing Angle, Color Coordinates: Display Center Luminance Uniformity: point 1~5 shown in a figure below 200 400 600 (1, 1) 1 2 150 ae Se) 5 300 a 3 4 450 ee, & (800, 600) *2) Definition of Contrast Ratio CR=Luminance with all white pixels / Luminance with all black pixels *3) Definition of Luminance Uniformity ALw=[Lw(MAX)/Lw(MIN)-1] x 100 *4) Definition of Response Time White Luminance 10% Black 10% *5) Definition of Viewing Angle (vy, 61) Normal Axis 1 v ' ! I 1K 0 ' \ vi Nat On Upper) \) \ _ o NJ 4 1 oe Yo 1 v 1 1 1 1 1 Jni-..-. Right (+) eo eek LCD panel Lower(-) T-55308D084J-FW-A-AAN (AA) OPTREX CORPORATION Page 19/39*6) Image sticking: Continuously display the test pattern shown in the figure below for two-hours. Then display a completely white screen. The previous image shall not persist more than two seconds at 25C. Black Lines TEST PATTERN FOR IMAGE STICKING TEST T-55308D084J-FW-A-AAN (AA) OPTREX CORPORATION Page 20/3910. RELIABILITY TEST CONDITION (1) 'lemperature and Humidity TEST ITEM CONDITIONS HIGH TEMPERATURE 40C, 90%RH, 240 h HIGH HUMIDITY OPERATION (No condensation) HIGH TEMPERATURE OPERATION 70C, 240 h LOW TEMPERATURE OPERATION 20C, 240 h HIGH TEMPERATURE STORAGE 80C, 240 h LOW TEMPERATURE STORAGE -20C, 240 h ; BETWEEN -20C (1h) and 80C(1h), THERMAL SHOCK (NON-OPERATION) 100 CYCLES (2) Shock & Vibration ITEM CONDITIONS Shock level: 1470 m/s? (150G) SHOCK Waveform: half sinusoidal wave, 2 ms (NON-OPERATION) | Number of shocks: one shock input in each direction of three mutually perpendicular axes for a total of six shock inputs Vibration level: 9.8 m/s? (1.0G) Waveform: sinusoidal VIBRATION Frequency range: 5 to 500 Hz (NON-OPERATION) Frequency sweep rate: 0.5 octave /min Duration: one sweep from 5 to 500 Hz in each of three mutually perpendicular axis(each x,y,z axis: 1 hour, total 3 hours) (3) Judgment standard The judgment of the above tests should be made as follow: Pass: Normal display image, no damage of the display function. (ex. no line defect) Partial transformation of the module parts should be ignored. Fail: No display image, damage of the display function. (ex. line defect) T-55308D084J-FW-A-AAN (AA) OPTREX CORPORATION Page 21/39