Power-One produces the industry’s broadest selection of
Linear power supplies with output voltages from 5 volts
through 250 volts. Rugged technology and proven design
merge to create quiet, highly-regulated, dependable DC
power.
The Linear power supplies are approved to domestic and
international regulatory standards, and are CE Marked to
the Low Voltage Directive (LVD).
• Worldwide AC Input Capabilities:
100/120/220/230/240 VAC
• ±0.05% Output Regulation
• Low Output Ripple
• UL, CSA, and TÜV Approvals
• Mean Time Before Failure (MTBF) in Excess of
300,000 Hours
• CE marked to Low Voltage Directive
• 100% Burn-In
• 2 Year Warranty
• Overvoltage Protection (OVP) Standard on 5V
Single Outputs, Optional for other outputs under 48V
Features
Linear Power Supplies Data Sheet
REV. JAN 16, 2006 Page 1 of 9 www.power-one.com
Description
OVERVOLTAGE PROTECTION OPTIONS
These optional overvoltage protection modules are offered for use with
Power-One’s Linear power supplies. Each is user adjustable from 6.4V to 34V.
OVP SELECTION GUIDE
MODEL CASE SIZE OVP MODULES REQUIRED
SINGLE B,C,N,D (1) OVP-12
OUTPUT E,F (1) OVP-24
DUAL AA,B,BB,CC (1) OVP-12 protects both outputs
OUTPUT E (1) OVP-24 protects both outputs
TRIPLE AA,BAA,D (1) OVP-12 protects both 12V
OUTPUT CBB, 131 through 15V outputs
DBB,DCC
PEAK N,BAA,CBB
CURRENT 131, CP340-A (1) OVP-12 protects any output
MODELS CP510-A not provided with built-in OVP
NOTE: Outputs with factory built-in OVP are indicated in the Voltage/Current Rating
Chart for each model. OVP is not available for 48V through 250V models.
OVP-12
OVP-24
Overvoltage Protection Options
REV. JAN 16, 2006 Page 2 of 9 www.power-one.com
Linear Power Supplies Data Sheet
Unsigned output voltages are isolated and can be used as either + or - polarities.
Output Output Model
Voltage Current (Input Voltage Case Additional
(VDC) (Amps) of 100 to 240VAC) Type Features & Notes
Single Output Models- 5V to 48Vout
5 1.5 HA5-1.5/OVP-A B A
5 3 HB5-3/OVP-A B A, C
5 6 HC5-6/OVP-A C A, C
5 9 HN5-9/OVP-A N A, C
5 12 HD5-12/OVP-A D A, C
5 18 HE5-18/OVP-A E A, C
5 25 F5-25/OVP-A F A, C, D, H
5 35 G5-35/OVP-A F A, C, D, H
5 50 CP197-A F A, C, D
12 1.7 HB12-1.7-A B C
12 3.4 HC12-3.4-A C C
12 5.1 HN12-5.1-A N C
12 6.8 HD12-6.8-A D C
12 10.2 HE12-10.2-A E C
12 to 15 0.9 HA15-0.9-A B
12 to 15 16 F15-15-A F C, D, H
15 1.5 HB15-1.5-A B C
15 3 HC15-3-A C C
15 4.5 HN15-4.5-A N C
15 6 HD15-6-A D C
15 9 HE15-9-A E C
24 1.2 HB24-1.2-A B C
24 2.4 HC24-2.4-A C C
24 3.6 HN24-3.6-A N C
24 4.8 HD24-4.8-A D C
24 7.2 HE24-7.2-A E C
24 to 28 0.5 HA24-0.5-A B
24 to 28 12 F24-12-A F C, D, H
28 1 HB28-1-A B C
28 2 HC28-2-A C C
28 3 HN28-3-A N C
28 4 HD28-4-A D C
28 6 HE28-6-A E C
48 0.5 HB48-0.5-A B
48 1 HC48-1-A C
48 3 HD48-3-A D C
48 4 HE48-4-A E C
(See Additional Features Column)
A Overvoltage protection, set at 6.2 V ±0.4 V.
B Non-adjustable 3-terminal regulator.
C Remote sense provided.
D With output inhibit and parallel
operation master/slave capability.
E With output inhibit.
F Adjustable 3-terminal regulator.
G Can be made into an isolated output by
removing jumper W1.
H Model requires 100 LFM forced-air
cooling above 75% of rated output
power at 50 degrees C.
Case Dimensions
Type (Inches)
AA 6.50 x 4.00 x 2.10
B 4.87 x 4.00 x 2.10
BAA 10.25 x 4.00 x 2.95
BB 7.00 x 4.87 x 2.95
C 5.62 x 4.87 x 2.95
CBB 11.00 x 4.87 x 3.28
CC 9.38 x 4.87 x 3.28
CP131 11.00 x 4.87 x 3.28
CP510-A 8.25 x 4.87 x 3.28
D 9.00 x 4.87 x 3.28
DBB 14.25 x 4.87 x 3.38
DCC 15.00 x 4.88 x 4.55
E 14.00 x 4.87 x 3.53
F 16.75 x 4.88 x 5.00
N 7.00 x 4.87 x 3.28
Case Dimensions
Type (Millimeters)
AA 165.10 x 101.60 x 53.34
B 123.70 x 101.60 x 53.34
BAA 260.35 x 101.60 x 74.93
BB 177.80 x 123.70 x 74.93
C 142.75 x 123.70 x 74.93
CBB 279.40 x 123.70 x 83.31
CC 238.25 x 123.70 x 83.31
CP131 279.40 x 123.70 x 83.31
CP510-A 209.55 x 123.70 x 83.31
D 228.60 x 123.70 x 83.31
DBB 361.95 x 123.70 x 85.85
DCC 381.00 x 123.95 x 115.57
E 355.60 x 123.70 x 89.66
F 425.50 x 123.95 x 127.00
N 177.80 x 123.70 x 83.31
Linear Power Supplies Data Sheet
REV. JAN 16, 2006 Page 3 of 9 www.power-one.com
Dual-Output Models
Unsigned output voltages are isolated and can be used as either + or - polarities.
(See Additional Features Column)
A Overvoltage protection, set at 6.2 V ±0.4 V.
B Non-adjustable 3-terminal regulator.
C Remote sense provided.
D With output inhibit and parallel
operation master/slave capability.
E With output inhibit.
F Adjustable 3-terminal regulator.
G Can be made into an isolated output by
removing jumper W1.
H Model requires 100 LFM forced-air
cooling above 75% of rated output
power at 50 degrees C.
Case Dimensions
Type (Inches)
AA 6.50 x 4.00 x 2.10
B 4.87 x 4.00 x 2.10
BAA 10.25 x 4.00 x 2.95
BB 7.00 x 4.87 x 2.95
C 5.62 x 4.87 x 2.95
CBB 11.00 x 4.87 x 3.28
CC 9.38 x 4.87 x 3.28
CP131 11.00 x 4.87 x 3.28
CP510-A 8.25 x 4.87 x 3.28
D 9.00 x 4.87 x 3.28
DBB 14.25 x 4.87 x 3.38
DCC 15.00 x 4.88 x 4.55
E 14.00 x 4.87 x 3.53
F 16.75 x 4.88 x 5.00
N 7.00 x 4.87 x 3.28
Case Dimensions
Type (Millimeters)
AA 165.10 x 101.60 x 53.34
B 123.70 x 101.60 x 53.34
BAA 260.35 x 101.60 x 74.93
BB 177.80 x 123.70 x 74.93
C 142.75 x 123.70 x 74.93
CBB 279.40 x 123.70 x 83.31
CC 238.25 x 123.70 x 83.31
CP131 279.40 x 123.70 x 83.31
CP510-A 209.55 x 123.70 x 83.31
D 228.60 x 123.70 x 83.31
DBB 361.95 x 123.70 x 85.85
DCC 381.00 x 123.95 x 115.57
E 355.60 x 123.70 x 89.66
F 425.50 x 123.95 x 127.00
N 177.80 x 123.70 x 83.31
Model numbers highlighted in yellow or shaded are not recommended for new designs.
Output Output Model
Voltage Current (Input Voltage Case Additional
(VDC) (Amps) of 100 to 240VAC) Type Features & Notes
Dual Output Models- 5V to 15Vout
+5, –5 1.5, 1.5 HAA5-1.5/OVP-A AA A
+5, –5 3, 3 HBB5-3/OVP-A BB A
+5, –5 6, 6 HCC5-6/OVP-A CC A, C
+5, +12 2, 4 CP323-A N A, E
+5, +12 6, 2.5 CP510-A CP510-A A
5, 12 to 15 2, 0.5 HAA512-A AA A, C
5, 12 to 15 3, 1.25 HBB512-A BB A, C
5, 12 to 15 6, 2.5 HCC512-A CC A, C
+12, –5 1, 0.4 HAA15-0.8-A AA C
+12, –5 1.7, 0.7 HBB15-1.5-A BB C
+12, –12 0.4, 0.4 HAD12-0.4-A B B
+12, –12 1, 1 HAA15-0.8-A AA C
+12, –12 1.7, 1.7 HBB15-1.5-A BB C
+12, –12 3.4, 3.4 HCC15-3-A CC C
+12, –12 5, 5 HDD15-5-A E C
+12, –15 1, 0.8 HAA15-0.8-A AA C
+12, –15 1.7, 1.5 HBB15-1.5-A BB C
+12, –15 3.4, 3 HCC15-3-A CC C
+12, –15 5, 5 HDD15-5-A E C
+15, –5 0.8, 0.4 HAA15-0.8-A AA C
+15, –5 1.5, 0.7 HBB15-1.5-A BB C
+15, –12 0.8, 1 HAA15-0.8-A AA C
+15, –12 1.5, 1.7 HBB15-1.5-A BB C
+15, –12 3, 3.4 HCC15-3-A CC C
15, –12 5, 5 HDD15-5-A E C
Dual Output Models- 15V to 24Vout
+15, –15 0.4, 0.4 HAD15-0.4-A B B
+15, –15 0.8, 0.8 HAA15-0.8-A AA C
+15, –15 1.5, 1.5 HBB15-1.5-A BB C
+15, –15 3, 3 HCC15-3-A CC C
+15, –15 5, 5 HDD15-5-A E C
+18 to +20, –18 to –20 0.4, 0.4 HAA24-0.6-A AA
+18 to +20, –18 to –20 0.9, 0.9 HBB24-1.2-A BB
+18 to +20, –18 to –20 1.8, 1.8 HCC24-2.4-A CC C
+18 to +20, –24 0.4, 0.6 HAA24-0.6-A AA
+18 to +20, –24 0.9, 1.2 HBB24-1.2-A BB
+18 to +20, –24 1.8, 2.4 HCC24-2.4-A CC C
+24, –18 to –20 0.6, 0.4 HAA24-0.6-A AA
+24, –18 to –20 1.2, 0.9 HBB24-1.2-A BB
+24, –18 to –20 2.4, 1.8 HCC24-2.4-A CC C
+24, –24 0.6, 0.6 HAA24-0.6-A AA
+24, –24 1.2, 1.2 HBB24-1.2-A BB
+24, –24 2.4, 2.4 HCC24-2.4-A CC C
REV. JAN 16, 2006 Page 4 of 9 www.power-one.com
Linear Power Supplies Data Sheet
Unsigned output voltages are isolated and can be used as either + or - polarities.
(See Additional Features Column)
A Overvoltage protection, set at 6.2 V ±0.4 V.
B Non-adjustable 3-terminal regulator.
C Remote sense provided.
D With output inhibit and parallel
operation master/slave capability.
E With output inhibit.
F Adjustable 3-terminal regulator.
G Can be made into an isolated output by
removing jumper W1.
H Model requires 100 LFM forced-air
cooling above 75% of rated output
power at 50 degrees C.
Case Dimensions
Type (Inches)
AA 6.50 x 4.00 x 2.10
B 4.87 x 4.00 x 2.10
BAA 10.25 x 4.00 x 2.95
BB 7.00 x 4.87 x 2.95
C 5.62 x 4.87 x 2.95
CBB 11.00 x 4.87 x 3.28
CC 9.38 x 4.87 x 3.28
CP131 11.00 x 4.87 x 3.28
CP510-A 8.25 x 4.87 x 3.28
D 9.00 x 4.87 x 3.28
DBB 14.25 x 4.87 x 3.38
DCC 15.00 x 4.88 x 4.55
E 14.00 x 4.87 x 3.53
F 16.75 x 4.88 x 5.00
N 7.00 x 4.87 x 3.28
Case Dimensions
Type (Millimeters)
AA 165.10 x 101.60 x 53.34
B 123.70 x 101.60 x 53.34
BAA 260.35 x 101.60 x 74.93
BB 177.80 x 123.70 x 74.93
C 142.75 x 123.70 x 74.93
CBB 279.40 x 123.70 x 83.31
CC 238.25 x 123.70 x 83.31
CP131 279.40 x 123.70 x 83.31
CP510-A 209.55 x 123.70 x 83.31
D 228.60 x 123.70 x 83.31
DBB 361.95 x 123.70 x 85.85
DCC 381.00 x 123.95 x 115.57
E 355.60 x 123.70 x 89.66
F 425.50 x 123.95 x 127.00
N 177.80 x 123.70 x 83.31
Model numbers highlighted in yellow or shaded are not recommended for new designs.
Output Output Model (Input
Voltage Current Voltage of Case Additional Features)
(VDC) (Amps) 100 to 240VAC) Type & Notes
Triple Output Models- 5V to 24Vout
+5, –5, 24 6, 1.2, 3.5 CP379-A CP131 A, C, F, G
5, +12, –5 3, 1, 0.4 HBAA-40W-A BAA A, C
+5, +12 to +15, –5 6, 1, 0.4 HCAA-60W-A D A, C
+5, +12, 5 6, 5, 0.25 CP498-A CP131 A, C, F
5, +12, –5 8, 1.7, 0.7 CP131-A CP131 A, C
5, +12, –5 12, 1.7, 0.7 HDBB-105W-A DBB A, C
5, +12 to +15, –5 2, 0.4, 0.4 HTAA-16W-A AA A
5, +12, –5 6, 1.7, 0.7 HCBB-75W-A CBB C
5, +12, –12 3, 1, 1 HBAA-40W-A BAA A, C
+5, +12 to +15, –12 to –15 6, 1, 1 HCAA-60W-A D A, C
+5, +12, 12 6, 5, 0.5 CP498-A CP131 A, C, F
5, +12, –12 6, 1.7, 1.7 HCBB-75W-A CBB C
5, +12, –12 8, 1.7, 1.7 CP131-A CP131 A, C
5, +12, –12 12, 1.7, 1.7 HDBB-105W-A DBB C
5, +12 to +15, –12 to –15 2, 0.4, 0.4 HTAA-16W-A AA A
5, +12, –12 12, 3.4, 3.4 HDCC-150W-A DCC A, C
5, +12, –15 3, 1, 0.8 HBAA-40W-A BAA A, C
5, +12, –15 6, 1.7, 1.5 HCBB-75W-A CBB C
5, +12, –15 8, 1.7, 1.5 CP131-A CP131 A, C
5, +12, –15 12, 1.7, 1.5 HDBB-105W-A DBB C
5, +12, –15 12, 3.4, 3 HDCC-150W-A DCC A, C
+5, –12, 24 6, 1.2, 3.5 CP379-A CP131 A, C, F, G
5, +15, –5 3, 0.8, 0.4 HBAA-40W-A BAA A, C
5, +15, –5 6, 1.5, 0.7 HCBB-75W-A CBB C
5, +15, –5 8, 1.5, 0.7 CP131-A CP131 A,
5, +15, –5 12, 1.5, 0.7 HDBB-105W-A DBB C
5, +15, –12 3, 0.8, 1 HBAA-40W-A BAA A, C
5, +15, –12 6, 1.5, 1.7 HCBB-75W-A CBB C
5, +15, –12 8, 1.5, 1.7 CP131-A CP131 A, C
5, +15, –12 12, 1.5, 1.7 HDBB-105W-A DBB C
5, +15, –12 12, 3, 3.4 HDCC-150W-A DCC A, C
5, +15, –15 3, 0.8, 0.8 HBAA-40W-A BAA A, C
5, +15, –15 6, 1.5, 1.5 HCBB-75W-A CBB C
5, +15, –15 8, 1.5, 1.5 CP131-A CP131 A, C
5, +15, –15 12, 1.5, 1.5 HDBB-105W-A DBB C
5, +15, –15 12, 3, 3 HDCC-150W-A DCC A, C
Quad Output Models- 5V to 24Vout Models
+5, +12, –5, +24 6, 1, 0.5, 2.4 CP503-A CP131 A, H
+5, +12, –12, +24 6, 1, 1, 2.4 CP503-A CP131 A, H
Linear Power Supplies Data Sheet
REV. JAN 16, 2006 Page 5 of 9 www.power-one.com
Input Specifications
PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS
Input Voltage - AC Jumper selectable, shipped factory configured for 100 VAC Tap 87 100 110
(Note 1, 2) 120VAC operation. All models must be externally 120 VAC Tap 104 120 132 VAC
fused for proper operation. Fuse ratings are marked 220 VAC Tap 191 220 242
on each unit. Consult factory for each unit’s fuse 240 VAC Tap 209 240 264
requirements.
Input Frequency AC input. 47 63 Hz
Line Regulation Output voltage charge for a 10% line change: F case models. -0.01 +0.01
HAD12, HAD15. -1.0 +1.0 %
Outputs with adjustable three terminal regulators. -0.5 +0.5
All other models. -0.05 +0.05
NOTES: 1) Derate output current 10% for 50Hz operation.
2) Input voltage tolerance for 230VAC operation is +15%, -10%.
Output Specifications
PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS
Output Adjustment Minimum output adjustment range (Note 1). -5 +5 %
Efficiency 5 volt outputs. 45
12 volt and 15 volt outputs. 55 %
24 volt and higher outputs. 60
F case models. 3.0 mVPK-PK
Ripple and Noise 5 volt, 12 volt, and 15 volt models. 5.0 mVPK-PK
(Note 2) All three terminal regulator outputs. 0.2 %PK-PK
24 volt through 250 volt models. 3.0mVPK-PK plus 0.02% of output voltage, max
Load Regulation Output change for a 50% load change: F case models. -0.02 +0.02
HAD12, HAD15. -1 +1 %
Outputs with adjustable three terminal regulators. -0.5 +0.5
All other models. -0.05 +0.05
Transient Response Recovery time, to within 1% of initial set point due to a 50% load change. 50 μs
NOTES: 1) OUTPUT VOLTAGE ADJUSTMENTS: Output voltage adjustments can be made to within ±5% of nominal voltage. Locate the “Vadj” potentiometer on the power
supply PCB and use a screwdriver to adjust the output pot. The HAD12 and HAD15 3-terminal regulator outputs are not adjustable.
2) Full load, 20MHz bandwidth.
Safety, Regulatory, and EMI Specifications
PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS
Agency Approvals UL60950 3rd Edition.
CSA 60950 3rd Edition. Approved
EN60950 3rd Edition.
IEC60950 3rd Edition
Dielectric Withstand Input to output. 3750 VRMS
Voltage Input to ground. 3750
Electromagnetic FCC CFR title 47 Part 15 Sub-Part B - conducted.
Interference EN55022 / CISPR 22 conducted. Compatible with system compliance to Level B.
EN55022 / CISPR 22 radiated.
Leakage Current Per EN60950 (264VAC) 23 50 μA
Interface Signals and Internal Protection
PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS
Overvoltage Protection Provided on 5 volt output units where indicated. 5.8 6.6 V
Other outputs may use optional overvoltage protectors OVP-12 and OVP-24.
Remote Sense Total voltage compensation for cable losses with respect to the main output. 250 mV
Provided on models where indicated.
Overcurrent/Short Circuit Automatic current limit/foldback. Rated as a percentage of output power. 115 120 140 %
Protection
Master/Slave Operation For parallel operation of up to 6 units. Master/slave pin provided on F case models only. Contact factory for application notes.
REV. JAN 16, 2006 Page 6 of 9 www.power-one.com
Linear Power Supplies Data Sheet
Environmental Specifications
PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS
Operating Temperature Derate output power linearly above 50°C by 3% per °C. At 100% load 0 50 °C
At 40% load 70 °C
Storage Temperature -40 85 °C
Temperature Coefficient 0°C to 50°C (after 15 minute warm-up). 0.1 0.3 %/°C
24 hours after warm-up. -0.3 +0.3 %
Shock Operating. 20 GPK
Vibration Random vibration from 10 Hz to 2 kHz, 3 axis. 6.15 GRMS
Relative Humidity Non-Condensing. 5 95 %RH
Linear Power Supplies Data Sheet
REV. JAN 16, 2006 Page 7 of 9 www.power-one.com
REV. JAN 16, 2006 Page 8 of 9 www.power-one.com
Linear Power Supplies Data Sheet
Linear Power Supplies Data Sheet
REV. JAN 16, 2006 Page 9 of 9 www.power-one.com
NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not designed, intended for use in, or authorized for use as critical components
in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective
divisional president of Power-One, Inc.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the
date manufactured. Specifications are subject to change without notice.
