Han® 24 HPR enlarged
09 45 600 0430
09 45 600 0440
09 45 600 0400
09 45 600 0420
Industrial Ethernet Cable
8-wires, Cat. 5, PUR
HARTING Industrial Cable 8-wire, Cat. 5, PUR
Industrial Cable
8-wire, Cat. 5, PUR
All data given is in line with the actual state of art and therefore not binding.
HARTING reserves the right to modify designs without giving the relevant reasons.
GeneralAdvantages
Identifi cation Part number Drawing
20 m ring
50 m ring
100 m ring
500 m reel • Wire: bare stranded copper, AWG26/7
• Insulation: PE, Ø 1.0 mm
• Inner sheath: halogen free, fl ame retardant
compound
• Overall screen: Aluminium-bonded polyeste
tape and tinned copper wire braid, braid
coverage about 85%
• Outer sheath: PUR, fl ame retardant, lead free
Color code: whbu/bu, whor/or, whgn/gn, whbr/br
Color of inner sheath: white
Color of outer sheath: rape yellow, RAL 1021
Overall diameter: 6.5 mm – 6.9 mm
Suitable for generic cabling Category 5 /
Class D according ISO/IEC 11801 respec-
tively EN 50173-1 especially for fl exible
installation (patch cords)
Qualifi ed for transmission up to 1GigaBit
Ethernet 1000Base-T acc. IEEE802.3ab
Based on stranded copper wires 26/7AWG
delivers patch cord performance up to
100MHz
Applicable for industrial premises
Double jacket allows Easy-Stripping and
delivers very short assembling time
Good EMC capability based on fully screen
design
Flame retardant, halogen free and RoHS
compliant
UL approved, UL AWM style 20963, E96807
•
•
•
•
•
•
•
•
This high-speed data cable was designed for fl exible instal-
lation in industrial premises and it’s especially suitable for
termination of HARTING RJ45 data plugs in IP20 as well as in
IP67/65.
The four pair / eight wire TP construction allows the trans-
mission of IT digital and analogue signals like Ethernet
10/100Mbit/s, 1GigaBit/s, video and voice services as well as
IP-based data services.
It delivers all characteristics to complete a Generic cabling
system according ISO/IEC 24702:2006 respectively EN
50173-3:2007. Maximum patch cord length specifi ed up to
20m (part of transmission channel class D)
Transmission performance meets Cat.5 specifi cation up
to 100MHz for 1GigaBit Ethernet transmission according
IEEE802.3ab.
The cable is fully screened by an overall wire braid and
guaranties a very protective signal transmission and high
EMC performance.
PUR is used as jacket material. The cable is fl ame retardant,
halogen free and RoHS compliant.
HARTING Industrial Cable 8-wire, Cat. 5, PUR
Technical Characteristics
Performance
Mechanical Characteristics
Minimal bending radius
Tensile strength
Crush
Electrical Characteristics at 20°C
Transfer impedance at 10 MHz
Coupling attenuation up to 1000 MHz
DC loop resistance
Insulation resistance
Mutual capacitance
Signal velocity
Propagation delay
Skew at 100 MHz
Characteristic impedance at 100 MHz
Test voltage
Operating voltage
Chemical Characteristics
Flame retardant
Halogen free
Fire load
Free of hazardous substances
Thermal Characteristics
Temperature range for fi xed installation
Temperature range for mobile operation
Printing
Weight about
Category 5 according to EN 50288-2-2(2004)
/IEC 61 156-6(2002)
During installation: 8 x diameter
After installation: 4 x diameter
max. 60 N
1000 N/100mm
5 mOhm/m
90 dB
max. 145 Ohm/km
min. 5 GOhm x km
47 pF/m
0.69 c
485 ns/100m
15 ns/100m
100 Ohm +/- 5 Ohm
1000V
max. 125V
IEC 60332-1-2
IEC 60754-2
0.75 MJ/m
RoHS 2002/95/EG
- 40° C to + 80° C
-10° C to + 60° C
HARTING INDUSTRIAL CABLE SF/UTP ES CAT 5 PUR
4x2xAWG26/7 * E96807 „RU“ AWM 20963 80°C 30V *
094560001050000 $Production lot code$ $Meter marking$
58 kg/km
2007-10-08
HARTING Industrial Cable 8-wire, Cat. 5, PUR
HARTING Electric GmbH & Co. KG
Wilhelm-Harting-Straße 1 | D-32339 Espelkamp | Postfach 14 73 | D-32328 Espelkamp
Tel.: +49 5772 47-97100 | Fax: +49 5772 47-688 | HARTING.Electric@HARTING.com | www.HARTING.com
Technical Characteristics
* EN 50288-2-2(2004)/IEC 61156-6(2002)
typ. Cat 5
max* typ. Cat 5
max* typ. Cat 5
max* typ. Cat 5
max* typ. Cat 5
max* typ. Cat 5
max* typ. Cat 5
max* typ. Cat 5
max*
10.24 0.32 76 65 73 62 76 65 73 62 91 64 88 61 24.9 -
40.44 0.6 71 56 68 53 70 56 67 53 76 52 73 49 29.8 23
10 0.8 0.95 64 50 61 47 63 49 60 47 68 44 65 41 38.2 25
16 1.01 1.21 60 47 57 44 59 46 56 44 64 61 61 37 39.3 25
31.25 1.44 1.71 56 43 53 40 54 41 51 40 58 34 55 31 36.7 23.6
62.5 2.07 2.48 52 38 49 35 50 36 47 35 52 28 49 25 35 21.5
100 2.66 3.2 48 35 45 32 45 32 42 32 47 24 44 21 29.9 20.1
155 3.26 - 45 - 42 - 42 - 39 - 42 - 39 - 26.2 -
200 3.86 - 42 - 39 - 39 - 36 - 37 - 34 - 23.5 -
Frequency
MHz Attenuation
dB/10m NEXT
dB PS NEXT
dB ACR
dB@10m PS ACR
dB@10m EL FEXT
dB@10m PS EL FEXT
dB@10m Return Loss
dB
