SPEC NO: DSAH3801 REV NO: V.6B DATE: DEC/27/2012 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203006377
3.2x1.6mm SMD CHIP LED LAMP
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Part Number: APTL3216ZGC Green
Features
z3.2mmx1.6mm SMT LED, 1.1mm thickness.
zLow power consumption.
zIdeal for backlight and indicator.
zVarious colors and lens types available.
zPackage : 2000pcs / reel.
zMoisture sensitivity level : level 3.
zRoHS compliant.
Description
The Green source color devices are made with InGaN
on Sapphire Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAH3801 REV NO: V.6B DATE: DEC/27/2012 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203006377
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APTL3216ZGC Green (InGaN) Water Clear 500 1100 70°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Green 515 nm IF=20mA
λD [1] Dominant Wavelength Green 525 nm IF=20mA
Δλ1/2 Spectral Line Half-width Green 30 nm IF=20mA
C Capacitance Green 45 pF VF=0V;f=1MHz
VF [2] Forward Voltage Green 3.3 4.1 V IF=20mA
IR Reverse Current Green 50 uA VR=5V
Parameter Green Units
Power dissipation 102.5 mW
DC Forward Current 25 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAH3801 REV NO: V.6B DATE: DEC/27/2012 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203006377
Green APTL3216ZGC
SPEC NO: DSAH3801 REV NO: V.6B DATE: DEC/27/2012 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203006377
APTL3216ZGC
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAH3801 REV NO: V.6B DATE: DEC/27/2012 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203006377
PACKING & LABEL SPECIFICATIONS APTL3216ZGC
All design applications should refer to Kingbright application notes available at
http://www.KingbrightUSA.com/ApplicationNotes