DOG2 MEMS-Series Inclinometer
DOG2 MEMS-Series Rev. 2 www.meas-spec.com 2013-May
MEAS Deutschland GmbH phone: +49-(0)231-9740-0 Email: info.de@meas-spec.com
Range ±25°, ±45° or ±90°
Easy to use volt age output
Supply voltage 8-30V
High res olutio n
The Dual Axis Inclinomet e r
is mainly developed with focus on platform
leveling, dynamic engine management,
tip-over protection a nd ti l t alarm.
A fast response time and good accuracy
makes
this device the ideal choice for
mobile leveling applications. It features
digital signal processing including
temperature compensation.
The integrated filter improves performance
and allows to use the sensor in many
noisy environments (e.g. vibrations).
FEATURES
• 8-30V supply voltage (5V on request)
• Digital signal processing includes
o filter (e.g. vibration damping)
o temperature compensation
• 12 bit resolution
• up to 100Hz refresh rate
• -40°C to +85°C temperature range
• Accuracy typically
o 0.5° (-40°C to +85°C)
o 0.15° at +25°C
APPLICATIONS
• Platform leveling
• Truck and off-road vehicle cabin or tool leveling
• Crane boom leveling
• Tilt alarm, e.g. digger
• Antenna leveling
• Inclination dependent engine control
• Solar panel elevation control
g
zero position
dimensions
DOG2 MEMS-Series Inclinometer
DOG2 MEMS-Series Rev. 2 www.meas-spec.com 2013-May
MEAS Deutschland GmbH phone: +49-(0)231-9740-0 Email: info.de@meas-spec.com
PARAMETERS
Parameter
Value
Comment
Range
+/- 25°, +/-45° or +/-90°
pitch & roll, other range available on request
Accuracy, typ.
0.5°
T=-40°C ~ +85°C
Accuracy, typ.
0.15°
T=+25°C
Resolution
12 bit
Refresh rate
50~100 Hz
Startup time
<1s
valid output angles
Supply/excitation voltage
8 ~ 30V
5V version available as OEM solution on request
Supply current
~15mA
Output
0.5 ~ 4.5V
-25° ~ +25°, -45° ~ 45° or -90° ~ +90°
Connector
AMP Superseal 1.5-Series,
4-pos cap housing
Tyco Art.-Nr. 282106-1
requires 4-pos plug housing from AMP Superseal 1.5-
Series at connecting harness, Tyco Art.-Nr. 282088-1
Cable
4 wire 0.25mm2,
outer diameter 6.5mm
length incl. connector 450mm, full temperature range,
flexible
Operation temperature range
-40°C ~ +85°C
Storage temperature range
-40°C ~ +85°C
Weight
<50g
Dimensions
70.5 x 45 x 15 mm
W x D x H
USER INTE RFACE
Pin
Function
Description
1
VCC
+8 ~ 30V supply input
2
GND
GND
3
Output X
0.5 ~ 4.5V, X axis output
4
Output Y
0.5 ~ 4.5V, Y axis output
COMMENTS
The inclinometer includes a powerful digital signal processing that offers various filter
algorithms and allows customer specific adaptions. It is possible to adjust the sensor to
different environments t
o yield an optimized performance.Customization can also be
made in terms of angular range and connectivity, i.e cable and connector.
The PA6.6 housing is very compact in size and has compression limiter bushings for safe
installation of the sensor. In contrast to uncoated (casted) aluminum, PA6.6 is resistant to
atmospheric attack. It is compatible with oil, grease and fuel also. Therefore it is frequently
used for engine and vehicle applications .
The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for
inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the
manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement
Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does
Measurement Specialties, Inc. assume any liabili ty arising out of the applic ation or use of any produc t or circ uit and specif icall y disclaims any
and all liabil ity, including without limit ation c onsequential or incidental dam ages. Typic al parameters can and do vary in dif ferent applications.
All operati ng param eters must be validated for each customer application by customer’s t echnical expert s. Measurement Specialties, Inc. does
not convey any license under its patent rights nor the rights of others.
DOG2 MEMS-Series Inclinometer
DOG2 MEMS-Series Rev. 2 www.meas-spec.com 2013-May
MEAS Deutschland GmbH phone: +49-(0)231-9740-0 Email: info.de@meas-spec.com
rderi ng info
ordering info
PART NUMBERING UNIT SHORT DESCRIPTION
G-NSDOG2-001 25 DOG2 Dual axis, range +/- 25°, Vcc +8 …30VDC, outpu t v oltage +0.5…+4.5V
G-NSDOG2-002 45 DOG2 D ual axis, range +/- 45°, Vcc +8 …30VDC, output voltage +0.5…+4.5V
G-NSDOG2-003 90 DOG2 D ual axis, range +/- 90°, Vcc +8… 30VDC, output voltage +0.5…+4.5V
