MASWSS0180 GaAs SPDT Terminated Switch DC - 2.5 GHz Features Rev. V2 Functional Schematic Very Low Power Consumption High Isolation: 30 dB up to 2 GHz Very High Intercept Point: 46 dBm IP3 Nanosecond Switching Speed Temperature Range: -40C to +85C Lead-Free SOIC-8 Package 100% Matte Tin Plating over Copper Halogen-Free "Green" Mold Compound 260C Reflow Compatible RoHS* Compliant Version of SW-338 Pin 1 V2 RF2 RFC GND V1 GND GND RF1 Description M/A-COM's MASWSS0180 is a GaAs MMIC SPDT terminated switch in a lead-free SOIC 8-lead surface mount plastic package. The MASWSS0180 is ideally suited for use where very low power consumption is required. Pin Configuration Pin No. Function Pin No. Function 1 V2 5 RF Port 1 2 RF Common 6 Ground 3 V1 7 Ground 4 Ground 8 RF Port 2 Typical applications include transmit/receive switching, switch matrices, and filter banks in systems such as radio and cellular equipment, PCM, GPS, fiber optic modules, and other battery powered radio equipment. The MASWSS0180 is fabricated with a monolithic GaAs MMIC using a mature 1-micron process. The process features full chip passivation for increased performance and reliability. Absolute Maximum Ratings 3,4 Parameter Absolute Maximum Input Power 0.05 GHz 0.5 - 2.0 GHz +27 dBm +34 dBm Control Voltage -8.5 V < VC < + 5 V Operating Temperature -40C to +85C Storage Temperature -65C to +150C Ordering Information 1,2 Part Number Package MASWSS0180 Bulk Packaging MASWSS0180TR 1000 piece reel MASWSS0180SMB Sample Test Board 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0180 GaAs SPDT Terminated Switch DC - 2.5 GHz Rev. V2 Electrical Specifications: TA = 25C, VC = 0 V / -2.9 V, Z0 = 50 Parameter Test Conditions Units Min. Typ. 5 Max. Insertion Loss DC - 0.5 GHz 0.5 - 1.0 GHz 1.0 - 2.0 GHz dB dB dB -- -- -- 0.55 0.60 0.65 -- 0.7 -- Isolation DC - 0.5 GHz 0.5 - 1.0 GHz 1.0 - 2.0 GHz dB dB dB -- 36 -- 50 43 35 -- -- -- VSWR On/Off DC - 2.0 GHz Ratio -- 1.1:1 -- Trise, Tfall 10% to 90% RF, 90% to 10 % RF nS -- 10 -- Ton, Toff 50% Control to 90% RF, 50% Control to 10% RF nS -- 20 -- Transients In-Band mV -- 25 -- 1 dB Compression Point Input Power 50 MHz @ 2.9V 1.0 GHz @ 2.9V 50 MHz @ 5.0V 1.0 GHz @ 5.0V dBm dBm dBm dBm -- -- -- -- 15 16 26 27 -- -- -- -- 2nd Order Intercept Measured Relative to Input Power (for two-tone input power up to +5 dBm) 50 MHz @ 2.9V 1.0 GHz @ 2.9V 50 MHz @ 5.0V 1.0 GHz @ 5.0V dBm dBm dBm dBm -- -- -- -- 46 52 63 82 -- -- -- -- 3rd Order Intercept Measured Relative to Input Power (for two-tone input power up to +5 dBm) 50 MHz @ 2.9V 1.0 GHz @ 2.9V 50 MHz @ 5.0V 1.0 GHz @ 5.0V dBm dBm dBm dBm -- -- -- -- 27 27 47 50 -- -- -- -- Control Current VC = 2.9 V A -- 15 35 5. Typical values represent performance at middle of frequency range noted. Truth Table 6 Control Inputs Handling Procedures Condition of Switch RF Common to Each RF Port V1 V2 RFC-RF1 RFC-RF2 1 0 ON OFF 0 1 OFF ON 6. 0 = 0 V 0.2 V, 1 = -2.9 V to -5.0 V Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0180 GaAs SPDT Terminated Switch DC - 2.5 GHz Rev. V2 Typical Performance Curves Insertion Loss Isolation 1.0 100 +25C -40C +85C 0.8 0.6 60 0.4 40 0.2 20 0.0 0.0 0.5 1.0 +25C -40C +85C 80 1.5 2.0 2.5 Frequency (GHz) 0 0.0 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) VSWR 1.5 1.4 +25C -40C +85C 1.3 1.2 1.1 1.0 0.0 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) Lead-Free SOIC-8 3 Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0180 GaAs SPDT Terminated Switch DC - 2.5 GHz Rev. V2 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. 4 MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support